You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

726 lines
22 KiB

Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
Update missing parts, improve til, and more - Node - Updated configuration to initialize the interface to all the smart contracts - Common - Moved BlockData and BatchData types to common so that they can be shared among: historydb, til and synchronizer - Remove hash.go (it was never used) - Remove slot.go (it was never used) - Remove smartcontractparams.go (it was never used, and appropriate structs are defined in `eth/`) - Comment state / status method until requirements of this method are properly defined, and move it to Synchronizer - Synchronizer - Simplify `Sync` routine to only sync one block per call, and return useful information. - Use BlockData and BatchData from common - Check that events belong to the expected block hash - In L1Batch, query L1UserTxs from HistoryDB - Fill ERC20 token information - Test AddTokens with test.Client - HistryDB - Use BlockData and BatchData from common - Add `GetAllTokens` method - Uncomment and update GetL1UserTxs (with corresponding tests) - Til - Rename all instances of RegisterToken to AddToken (to follow the smart contract implementation naming) - Use BlockData and BatchData from common - Move testL1CoordinatorTxs and testL2Txs to a separate struct from BatchData in Context - Start Context with BatchNum = 1 (which the protocol defines to be the first batchNum) - In every Batch, set StateRoot and ExitRoot to a non-nil big.Int (zero). - In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not used, set it to 0; so that no *big.Int is nil. - In L1UserTx, don't set BatchNum, because when L1UserTxs are created and obtained by the synchronizer, the BatchNum is not known yet (it's a synchronizer job to set it) - In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago
  1. package synchronizer
  2. import (
  3. "context"
  4. "database/sql"
  5. "fmt"
  6. "math/big"
  7. "github.com/ethereum/go-ethereum"
  8. "github.com/hermeznetwork/hermez-node/common"
  9. "github.com/hermeznetwork/hermez-node/db/historydb"
  10. "github.com/hermeznetwork/hermez-node/db/statedb"
  11. "github.com/hermeznetwork/hermez-node/eth"
  12. "github.com/hermeznetwork/hermez-node/log"
  13. )
  14. var (
  15. // ErrNotAbleToSync is used when there is not possible to find a valid block to sync
  16. // ErrNotAbleToSync = errors.New("it has not been possible to synchronize any block")
  17. )
  18. // // SyncronizerState describes the synchronization progress of the smart contracts
  19. // type SyncronizerState struct {
  20. // LastUpdate time.Time // last time this information was updated
  21. // CurrentBatchNum BatchNum // Last batch that was forged on the blockchain
  22. // CurrentBlockNum uint64 // Last block that was mined on Ethereum
  23. // CurrentToForgeL1TxsNum uint32
  24. // LastSyncedBatchNum BatchNum // last batch synchronized by the coordinator
  25. // LastSyncedBlockNum uint64 // last Ethereum block synchronized by the coordinator
  26. // LastSyncedToForgeL1TxsNum uint32
  27. // }
  28. // // SyncStatus is returned by the Status method of the Synchronizer
  29. // type SyncStatus struct {
  30. // CurrentBlock int64
  31. // CurrentBatch BatchNum
  32. // CurrentForgerAddr ethCommon.Address
  33. // NextForgerAddr ethCommon.Address
  34. // Synchronized bool
  35. // }
  36. // ConfigStartBlockNum sets the first block used to start tracking the smart
  37. // contracts
  38. type ConfigStartBlockNum struct {
  39. Rollup int64 `validate:"required"`
  40. Auction int64 `validate:"required"`
  41. WDelayer int64 `validate:"required"`
  42. }
  43. // SCVariables joins all the smart contract variables in a single struct
  44. type SCVariables struct {
  45. Rollup common.RollupVariables `validate:"required"`
  46. Auction common.AuctionVariables `validate:"required"`
  47. WDelayer common.WDelayerVariables `validate:"required"`
  48. }
  49. // Config is the Synchronizer configuration
  50. type Config struct {
  51. StartBlockNum ConfigStartBlockNum
  52. InitialVariables SCVariables
  53. }
  54. // Synchronizer implements the Synchronizer type
  55. type Synchronizer struct {
  56. ethClient eth.ClientInterface
  57. auctionConstants common.AuctionConstants
  58. rollupConstants common.RollupConstants
  59. wDelayerConstants common.WDelayerConstants
  60. historyDB *historydb.HistoryDB
  61. stateDB *statedb.StateDB
  62. cfg Config
  63. startBlockNum int64
  64. vars SCVariables
  65. // firstSavedBlock *common.Block
  66. // mux sync.Mutex
  67. }
  68. // NewSynchronizer creates a new Synchronizer
  69. func NewSynchronizer(ethClient eth.ClientInterface, historyDB *historydb.HistoryDB,
  70. stateDB *statedb.StateDB, cfg Config) (*Synchronizer, error) {
  71. auctionConstants, err := ethClient.AuctionConstants()
  72. if err != nil {
  73. log.Errorw("NewSynchronizer ethClient.AuctionConstants()", "err", err)
  74. return nil, err
  75. }
  76. rollupConstants, err := ethClient.RollupConstants()
  77. if err != nil {
  78. log.Errorw("NewSynchronizer ethClient.RollupConstants()", "err", err)
  79. return nil, err
  80. }
  81. wDelayerConstants, err := ethClient.WDelayerConstants()
  82. if err != nil {
  83. log.Errorw("NewSynchronizer ethClient.WDelayerConstants()", "err", err)
  84. return nil, err
  85. }
  86. // Set startBlockNum to the minimum between Auction, Rollup and
  87. // WDelayer StartBlockNum
  88. startBlockNum := cfg.StartBlockNum.Auction
  89. if startBlockNum < cfg.StartBlockNum.Rollup {
  90. startBlockNum = cfg.StartBlockNum.Rollup
  91. }
  92. if startBlockNum < cfg.StartBlockNum.WDelayer {
  93. startBlockNum = cfg.StartBlockNum.WDelayer
  94. }
  95. s := &Synchronizer{
  96. ethClient: ethClient,
  97. auctionConstants: *auctionConstants,
  98. rollupConstants: *rollupConstants,
  99. wDelayerConstants: *wDelayerConstants,
  100. historyDB: historyDB,
  101. stateDB: stateDB,
  102. cfg: cfg,
  103. startBlockNum: startBlockNum,
  104. }
  105. return s, s.init()
  106. }
  107. // AuctionConstants returns the AuctionConstants read from the smart contract
  108. func (s *Synchronizer) AuctionConstants() *common.AuctionConstants {
  109. return &s.auctionConstants
  110. }
  111. // RollupConstants returns the RollupConstants read from the smart contract
  112. func (s *Synchronizer) RollupConstants() *common.RollupConstants {
  113. return &s.rollupConstants
  114. }
  115. // WDelayerConstants returns the WDelayerConstants read from the smart contract
  116. func (s *Synchronizer) WDelayerConstants() *common.WDelayerConstants {
  117. return &s.wDelayerConstants
  118. }
  119. func (s *Synchronizer) init() error {
  120. rollup, auction, wDelayer, err := s.historyDB.GetSCVars()
  121. if err == sql.ErrNoRows {
  122. rollup = &s.cfg.InitialVariables.Rollup
  123. auction = &s.cfg.InitialVariables.Auction
  124. wDelayer = &s.cfg.InitialVariables.WDelayer
  125. log.Debug("Setting initial SCVars in HistoryDB")
  126. if err = s.historyDB.SetInitialSCVars(rollup, auction, wDelayer); err != nil {
  127. return err
  128. }
  129. }
  130. s.vars.Rollup = *rollup
  131. s.vars.Auction = *auction
  132. s.vars.WDelayer = *wDelayer
  133. return nil
  134. }
  135. // Sync2 attems to synchronize an ethereum block starting from lastSavedBlock.
  136. // If lastSavedBlock is nil, the lastSavedBlock value is obtained from de DB.
  137. // If a block is synched, it will be returned and also stored in the DB. If a
  138. // reorg is detected, the number of discarded blocks will be returned and no
  139. // synchronization will be made.
  140. // TODO: Be smart about locking: only lock during the read/write operations
  141. func (s *Synchronizer) Sync2(ctx context.Context, lastSavedBlock *common.Block) (*common.BlockData, *int64, error) {
  142. var nextBlockNum int64 // next block number to sync
  143. if lastSavedBlock == nil {
  144. var err error
  145. // Get lastSavedBlock from History DB
  146. lastSavedBlock, err = s.historyDB.GetLastBlock()
  147. if err != nil && err != sql.ErrNoRows {
  148. return nil, nil, err
  149. }
  150. // If we don't have any stored block, we must do a full sync
  151. // starting from the startBlockNum
  152. if err == sql.ErrNoRows || lastSavedBlock.EthBlockNum == 0 {
  153. nextBlockNum = s.startBlockNum
  154. lastSavedBlock = nil
  155. }
  156. }
  157. if lastSavedBlock != nil {
  158. nextBlockNum = lastSavedBlock.EthBlockNum + 1
  159. }
  160. ethBlock, err := s.ethClient.EthBlockByNumber(ctx, nextBlockNum)
  161. if err == ethereum.NotFound {
  162. return nil, nil, nil
  163. } else if err != nil {
  164. return nil, nil, err
  165. }
  166. log.Debugf("ethBlock: num: %v, parent: %v, hash: %v", ethBlock.EthBlockNum, ethBlock.ParentHash.String(), ethBlock.Hash.String())
  167. log.Debugw("Syncing...", "block", nextBlockNum)
  168. // Check that the obtianed ethBlock.ParentHash == prevEthBlock.Hash; if not, reorg!
  169. if lastSavedBlock != nil {
  170. if lastSavedBlock.Hash != ethBlock.ParentHash {
  171. // Reorg detected
  172. log.Debugw("Reorg Detected",
  173. "blockNum", ethBlock.EthBlockNum,
  174. "block.parent(got)", ethBlock.ParentHash, "parent.hash(exp)", lastSavedBlock.Hash)
  175. lastDBBlockNum, err := s.reorg(lastSavedBlock)
  176. if err != nil {
  177. return nil, nil, err
  178. }
  179. discarded := lastSavedBlock.EthBlockNum - lastDBBlockNum
  180. return nil, &discarded, nil
  181. }
  182. }
  183. // Get data from the rollup contract
  184. rollupData, err := s.rollupSync(ethBlock)
  185. if err != nil {
  186. return nil, nil, err
  187. }
  188. // Get data from the auction contract
  189. auctionData, err := s.auctionSync(ethBlock)
  190. if err != nil {
  191. return nil, nil, err
  192. }
  193. // Get data from the WithdrawalDelayer contract
  194. wdelayerData, err := s.wdelayerSync(ethBlock)
  195. if err != nil {
  196. return nil, nil, err
  197. }
  198. // Group all the block data into the structs to save into HistoryDB
  199. blockData := common.BlockData{
  200. Block: *ethBlock,
  201. Rollup: *rollupData,
  202. Auction: *auctionData,
  203. WDelayer: *wdelayerData,
  204. }
  205. // log.Debugw("Sync()", "block", blockData)
  206. // err = s.historyDB.AddBlock(blockData.Block)
  207. // if err != nil {
  208. // return err
  209. // }
  210. err = s.historyDB.AddBlockSCData(&blockData)
  211. if err != nil {
  212. return nil, nil, err
  213. }
  214. return &blockData, nil, nil
  215. }
  216. // reorg manages a reorg, updating History and State DB as needed. Keeps
  217. // checking previous blocks from the HistoryDB against the blockchain until a
  218. // block hash match is found. All future blocks in the HistoryDB and
  219. // corresponding batches in StateBD are discarded. Returns the last valid
  220. // blockNum from the HistoryDB.
  221. func (s *Synchronizer) reorg(uncleBlock *common.Block) (int64, error) {
  222. blockNum := uncleBlock.EthBlockNum
  223. for blockNum >= s.startBlockNum {
  224. ethBlock, err := s.ethClient.EthBlockByNumber(context.Background(), blockNum)
  225. if err != nil {
  226. return 0, err
  227. }
  228. block, err := s.historyDB.GetBlock(blockNum)
  229. if err != nil {
  230. return 0, err
  231. }
  232. if block.Hash == ethBlock.Hash {
  233. log.Debugf("Found valid block: %v", blockNum)
  234. break
  235. }
  236. blockNum--
  237. }
  238. total := uncleBlock.EthBlockNum - blockNum
  239. log.Debugw("Discarding blocks", "total", total, "from", uncleBlock.EthBlockNum, "to", blockNum+1)
  240. // Set History DB and State DB to the correct state
  241. err := s.historyDB.Reorg(blockNum)
  242. if err != nil {
  243. return 0, err
  244. }
  245. batchNum, err := s.historyDB.GetLastBatchNum()
  246. if err != nil && err != sql.ErrNoRows {
  247. return 0, err
  248. }
  249. if batchNum != 0 {
  250. err = s.stateDB.Reset(batchNum)
  251. if err != nil {
  252. return 0, err
  253. }
  254. }
  255. return blockNum, nil
  256. }
  257. // TODO: Figure out who will use the Status output, and only return what's strictly need
  258. /*
  259. // Status returns current status values from the Synchronizer
  260. func (s *Synchronizer) Status() (*common.SyncStatus, error) {
  261. // Avoid possible inconsistencies
  262. s.mux.Lock()
  263. defer s.mux.Unlock()
  264. var status *common.SyncStatus
  265. // TODO: Join all queries to the DB into a single transaction so that
  266. // we can remove the mutex locking here:
  267. // - HistoryDB.GetLastBlock
  268. // - HistoryDB.GetLastBatchNum
  269. // - HistoryDB.GetCurrentForgerAddr
  270. // - HistoryDB.GetNextForgerAddr
  271. // Get latest block in History DB
  272. lastSavedBlock, err := s.historyDB.GetLastBlock()
  273. if err != nil {
  274. return nil, err
  275. }
  276. status.CurrentBlock = lastSavedBlock.EthBlockNum
  277. // Get latest batch in History DB
  278. lastSavedBatch, err := s.historyDB.GetLastBatchNum()
  279. if err != nil && err != sql.ErrNoRows {
  280. return nil, err
  281. }
  282. status.CurrentBatch = lastSavedBatch
  283. // Get latest blockNum in blockchain
  284. latestBlockNum, err := s.ethClient.EthCurrentBlock()
  285. if err != nil {
  286. return nil, err
  287. }
  288. // TODO: Get CurrentForgerAddr & NextForgerAddr from the Auction SC / Or from the HistoryDB
  289. // Check if Synchronizer is synchronized
  290. status.Synchronized = status.CurrentBlock == latestBlockNum
  291. return status, nil
  292. }
  293. */
  294. // rollupSync retreives all the Rollup Smart Contract Data that happened at
  295. // ethBlock.blockNum with ethBlock.Hash.
  296. func (s *Synchronizer) rollupSync(ethBlock *common.Block) (*common.RollupData, error) {
  297. blockNum := ethBlock.EthBlockNum
  298. var rollupData = common.NewRollupData()
  299. // var forgeL1TxsNum int64
  300. // Get rollup events in the block, and make sure the block hash matches
  301. // the expected one.
  302. rollupEvents, blockHash, err := s.ethClient.RollupEventsByBlock(blockNum)
  303. if err != nil {
  304. return nil, err
  305. }
  306. // No events in this block
  307. if blockHash == nil {
  308. return &rollupData, nil
  309. }
  310. if *blockHash != ethBlock.Hash {
  311. log.Errorw("Block hash mismatch in Rollup events", "expected", ethBlock.Hash.String(),
  312. "got", blockHash.String())
  313. return nil, eth.ErrBlockHashMismatchEvent
  314. }
  315. var nextForgeL1TxsNum int64 // forgeL1TxsNum for the next L1Batch
  316. nextForgeL1TxsNumPtr, err := s.historyDB.GetLastL1TxsNum()
  317. if err != nil {
  318. return nil, err
  319. }
  320. if nextForgeL1TxsNumPtr != nil {
  321. nextForgeL1TxsNum = *nextForgeL1TxsNumPtr + 1
  322. } else {
  323. nextForgeL1TxsNum = 0
  324. }
  325. // Get L1UserTX
  326. rollupData.L1UserTxs, err = getL1UserTx(rollupEvents.L1UserTx, blockNum)
  327. if err != nil {
  328. return nil, err
  329. }
  330. // Get ForgeBatch events to get the L1CoordinatorTxs
  331. for _, evtForgeBatch := range rollupEvents.ForgeBatch {
  332. batchData := common.NewBatchData()
  333. position := 0
  334. // Get the input for each Tx
  335. forgeBatchArgs, sender, err := s.ethClient.RollupForgeBatchArgs(evtForgeBatch.EthTxHash)
  336. if err != nil {
  337. return nil, err
  338. }
  339. batchNum := common.BatchNum(evtForgeBatch.BatchNum)
  340. var l1UserTxs []common.L1Tx
  341. // Check if this is a L1Batch to get L1 Tx from it
  342. if forgeBatchArgs.L1Batch {
  343. // Get L1UserTxs with toForgeL1TxsNum, which correspond
  344. // to the L1UserTxs that are forged in this batch, so
  345. // that stateDB can process them.
  346. // First try to find them in HistoryDB.
  347. l1UserTxs, err = s.historyDB.GetL1UserTxs(nextForgeL1TxsNum)
  348. if err != nil {
  349. return nil, err
  350. }
  351. // Apart from the DB, try to find them in this block.
  352. // This could happen because in a block there could be
  353. // multiple batches with L1Batch = true (although it's
  354. // a very rare case). If not found in the DB and the
  355. // block doesn't contain the l1UserTxs, it means that
  356. // the L1UserTxs queue with toForgeL1TxsNum was closed
  357. // empty, so we leave `l1UserTxs` as an empty slice.
  358. for _, l1UserTx := range rollupData.L1UserTxs {
  359. if *l1UserTx.ToForgeL1TxsNum == nextForgeL1TxsNum {
  360. l1UserTxs = append(l1UserTxs, l1UserTx)
  361. }
  362. }
  363. position = len(l1UserTxs)
  364. }
  365. // Get L1 Coordinator Txs
  366. for i := range forgeBatchArgs.L1CoordinatorTxs {
  367. l1CoordinatorTx := forgeBatchArgs.L1CoordinatorTxs[i]
  368. l1CoordinatorTx.Position = position
  369. // l1CoordinatorTx.ToForgeL1TxsNum = &forgeL1TxsNum
  370. l1CoordinatorTx.UserOrigin = false
  371. l1CoordinatorTx.EthBlockNum = blockNum
  372. l1CoordinatorTx.BatchNum = &batchNum
  373. l1Tx, err := common.NewL1Tx(&l1CoordinatorTx)
  374. if err != nil {
  375. return nil, err
  376. }
  377. batchData.L1CoordinatorTxs = append(batchData.L1CoordinatorTxs, *l1Tx)
  378. position++
  379. // fmt.Println("DGB l1coordtx")
  380. }
  381. // Insert all the txs forged in this batch (l1UserTxs,
  382. // L1CoordinatorTxs, PoolL2Txs) into stateDB so that they are
  383. // processed.
  384. poolL2Txs := common.L2TxsToPoolL2Txs(forgeBatchArgs.L2TxsData) // NOTE: This is a big ugly, find a better way
  385. // ProcessTxs updates poolL2Txs adding: Nonce (and also TokenID, but we don't use it).
  386. processTxsOut, err := s.stateDB.ProcessTxs(forgeBatchArgs.FeeIdxCoordinator, l1UserTxs,
  387. batchData.L1CoordinatorTxs, poolL2Txs)
  388. if err != nil {
  389. return nil, err
  390. }
  391. // Set batchNum in exits
  392. for i := range processTxsOut.ExitInfos {
  393. exit := &processTxsOut.ExitInfos[i]
  394. exit.BatchNum = batchNum
  395. }
  396. batchData.ExitTree = processTxsOut.ExitInfos
  397. l2Txs, err := common.PoolL2TxsToL2Txs(poolL2Txs) // NOTE: This is a big uggly, find a better way
  398. if err != nil {
  399. return nil, err
  400. }
  401. for i := range l2Txs {
  402. tx := &l2Txs[i]
  403. tx.Position = position
  404. tx.EthBlockNum = blockNum
  405. tx.BatchNum = batchNum
  406. nTx, err := common.NewL2Tx(tx)
  407. if err != nil {
  408. return nil, err
  409. }
  410. batchData.L2Txs = append(batchData.L2Txs, *nTx)
  411. position++
  412. }
  413. for i := range processTxsOut.CreatedAccounts {
  414. createdAccount := &processTxsOut.CreatedAccounts[i]
  415. createdAccount.Nonce = 0
  416. createdAccount.Balance = big.NewInt(0)
  417. createdAccount.BatchNum = batchNum
  418. }
  419. batchData.CreatedAccounts = processTxsOut.CreatedAccounts
  420. slotNum := int64(0)
  421. if ethBlock.EthBlockNum >= s.auctionConstants.GenesisBlockNum {
  422. slotNum = (ethBlock.EthBlockNum - s.auctionConstants.GenesisBlockNum) /
  423. int64(s.auctionConstants.BlocksPerSlot)
  424. }
  425. // Get Batch information
  426. // fmt.Printf("DBG: %#v\n", forgeBatchArgs.FeeIdxCoordinator)
  427. batch := common.Batch{
  428. BatchNum: batchNum,
  429. EthBlockNum: blockNum,
  430. ForgerAddr: *sender,
  431. CollectedFees: processTxsOut.CollectedFees,
  432. FeeIdxsCoordinator: forgeBatchArgs.FeeIdxCoordinator,
  433. StateRoot: forgeBatchArgs.NewStRoot,
  434. NumAccounts: len(batchData.CreatedAccounts),
  435. LastIdx: forgeBatchArgs.NewLastIdx,
  436. ExitRoot: forgeBatchArgs.NewExitRoot,
  437. SlotNum: slotNum,
  438. }
  439. nextForgeL1TxsNumCpy := nextForgeL1TxsNum
  440. if forgeBatchArgs.L1Batch {
  441. batch.ForgeL1TxsNum = &nextForgeL1TxsNumCpy
  442. batchData.L1Batch = true
  443. nextForgeL1TxsNum++
  444. }
  445. batchData.Batch = batch
  446. rollupData.Batches = append(rollupData.Batches, *batchData)
  447. }
  448. // Get Registered Tokens
  449. for _, evtAddToken := range rollupEvents.AddToken {
  450. var token common.Token
  451. token.TokenID = common.TokenID(evtAddToken.TokenID)
  452. token.EthAddr = evtAddToken.TokenAddress
  453. token.EthBlockNum = blockNum
  454. if consts, err := s.ethClient.EthERC20Consts(evtAddToken.TokenAddress); err != nil {
  455. log.Warnw("Error retreiving ERC20 token constants", "addr", evtAddToken.TokenAddress)
  456. token.Name = "ERC20_ETH_ERROR"
  457. token.Symbol = "ERROR"
  458. token.Decimals = 1
  459. } else {
  460. token.Name = cutStringMax(consts.Name, 20)
  461. token.Symbol = cutStringMax(consts.Symbol, 10)
  462. token.Decimals = consts.Decimals
  463. }
  464. rollupData.AddedTokens = append(rollupData.AddedTokens, token)
  465. }
  466. varsUpdate := false
  467. for _, evtUpdateForgeL1L2BatchTimeout := range rollupEvents.UpdateForgeL1L2BatchTimeout {
  468. s.vars.Rollup.ForgeL1L2BatchTimeout = evtUpdateForgeL1L2BatchTimeout.NewForgeL1L2BatchTimeout
  469. varsUpdate = true
  470. }
  471. for _, evtUpdateFeeAddToken := range rollupEvents.UpdateFeeAddToken {
  472. s.vars.Rollup.FeeAddToken = evtUpdateFeeAddToken.NewFeeAddToken
  473. varsUpdate = true
  474. }
  475. // NOTE: WithdrawDelay update doesn't have event, so we can't track changes
  476. // NOTE: Buckets update dones't have event, so we can't track changes
  477. for _, evtWithdraw := range rollupEvents.Withdraw {
  478. rollupData.Withdrawals = append(rollupData.Withdrawals, common.WithdrawInfo{
  479. Idx: common.Idx(evtWithdraw.Idx),
  480. NumExitRoot: common.BatchNum(evtWithdraw.NumExitRoot),
  481. InstantWithdraw: evtWithdraw.InstantWithdraw,
  482. })
  483. }
  484. if varsUpdate {
  485. s.vars.Rollup.EthBlockNum = blockNum
  486. rollupData.Vars = &s.vars.Rollup
  487. }
  488. return &rollupData, nil
  489. }
  490. func cutStringMax(s string, max int) string {
  491. if len(s) > max {
  492. return s[:max]
  493. }
  494. return s
  495. }
  496. // auctionSync gets information from the Auction Contract
  497. func (s *Synchronizer) auctionSync(ethBlock *common.Block) (*common.AuctionData, error) {
  498. blockNum := ethBlock.EthBlockNum
  499. var auctionData = common.NewAuctionData()
  500. // Get auction events in the block
  501. auctionEvents, blockHash, err := s.ethClient.AuctionEventsByBlock(blockNum)
  502. if err != nil {
  503. return nil, err
  504. }
  505. // No events in this block
  506. if blockHash == nil {
  507. return &auctionData, nil
  508. }
  509. if *blockHash != ethBlock.Hash {
  510. log.Errorw("Block hash mismatch in Auction events", "expected", ethBlock.Hash.String(),
  511. "got", blockHash.String())
  512. return nil, eth.ErrBlockHashMismatchEvent
  513. }
  514. // Get bids
  515. for _, evtNewBid := range auctionEvents.NewBid {
  516. bid := common.Bid{
  517. SlotNum: evtNewBid.Slot,
  518. BidValue: evtNewBid.BidAmount,
  519. Bidder: evtNewBid.Bidder,
  520. EthBlockNum: blockNum,
  521. }
  522. auctionData.Bids = append(auctionData.Bids, bid)
  523. }
  524. // Get Coordinators
  525. for _, evtSetCoordinator := range auctionEvents.SetCoordinator {
  526. coordinator := common.Coordinator{
  527. Bidder: evtSetCoordinator.BidderAddress,
  528. Forger: evtSetCoordinator.ForgerAddress,
  529. URL: evtSetCoordinator.CoordinatorURL,
  530. }
  531. auctionData.Coordinators = append(auctionData.Coordinators, coordinator)
  532. }
  533. varsUpdate := false
  534. for _, evt := range auctionEvents.NewSlotDeadline {
  535. s.vars.Auction.SlotDeadline = evt.NewSlotDeadline
  536. varsUpdate = true
  537. }
  538. for _, evt := range auctionEvents.NewClosedAuctionSlots {
  539. s.vars.Auction.ClosedAuctionSlots = evt.NewClosedAuctionSlots
  540. varsUpdate = true
  541. }
  542. for _, evt := range auctionEvents.NewOutbidding {
  543. s.vars.Auction.Outbidding = evt.NewOutbidding
  544. varsUpdate = true
  545. }
  546. for _, evt := range auctionEvents.NewDonationAddress {
  547. s.vars.Auction.DonationAddress = evt.NewDonationAddress
  548. varsUpdate = true
  549. }
  550. for _, evt := range auctionEvents.NewBootCoordinator {
  551. s.vars.Auction.BootCoordinator = evt.NewBootCoordinator
  552. varsUpdate = true
  553. }
  554. for _, evt := range auctionEvents.NewOpenAuctionSlots {
  555. s.vars.Auction.OpenAuctionSlots = evt.NewOpenAuctionSlots
  556. varsUpdate = true
  557. }
  558. for _, evt := range auctionEvents.NewAllocationRatio {
  559. s.vars.Auction.AllocationRatio = evt.NewAllocationRatio
  560. varsUpdate = true
  561. }
  562. for _, evt := range auctionEvents.NewDefaultSlotSetBid {
  563. if evt.SlotSet > 6 { //nolint:gomnd
  564. return nil, fmt.Errorf("unexpected SlotSet in "+
  565. "auctionEvents.NewDefaultSlotSetBid: %v", evt.SlotSet)
  566. }
  567. s.vars.Auction.DefaultSlotSetBid[evt.SlotSet] = evt.NewInitialMinBid
  568. varsUpdate = true
  569. }
  570. // NOTE: We ignore NewForgeAllocated
  571. // NOTE: We ignore NewForge because we're already tracking ForgeBatch event from Rollup
  572. // NOTE: We ignore HEZClaimed
  573. if varsUpdate {
  574. s.vars.Auction.EthBlockNum = blockNum
  575. auctionData.Vars = &s.vars.Auction
  576. }
  577. return &auctionData, nil
  578. }
  579. // wdelayerSync gets information from the Withdrawal Delayer Contract
  580. func (s *Synchronizer) wdelayerSync(ethBlock *common.Block) (*common.WDelayerData, error) {
  581. blockNum := ethBlock.EthBlockNum
  582. wDelayerData := common.NewWDelayerData()
  583. // Get wDelayer events in the block
  584. wDelayerEvents, blockHash, err := s.ethClient.WDelayerEventsByBlock(blockNum)
  585. if err != nil {
  586. return nil, err
  587. }
  588. // No events in this block
  589. if blockHash == nil {
  590. return &wDelayerData, nil
  591. }
  592. if *blockHash != ethBlock.Hash {
  593. log.Errorw("Block hash mismatch in WDelayer events", "expected", ethBlock.Hash.String(),
  594. "got", blockHash.String())
  595. return nil, eth.ErrBlockHashMismatchEvent
  596. }
  597. varsUpdate := false
  598. // TODO Deposit
  599. // TODO Withdraw
  600. // TODO EscapeHatchWithdrawal
  601. for range wDelayerEvents.EmergencyModeEnabled {
  602. s.vars.WDelayer.EmergencyMode = true
  603. varsUpdate = true
  604. }
  605. for _, evt := range wDelayerEvents.NewWithdrawalDelay {
  606. s.vars.WDelayer.WithdrawalDelay = evt.WithdrawalDelay
  607. varsUpdate = true
  608. }
  609. for _, evt := range wDelayerEvents.NewHermezKeeperAddress {
  610. s.vars.WDelayer.HermezKeeperAddress = evt.NewHermezKeeperAddress
  611. varsUpdate = true
  612. }
  613. for _, evt := range wDelayerEvents.NewWhiteHackGroupAddress {
  614. s.vars.WDelayer.WhiteHackGroupAddress = evt.NewWhiteHackGroupAddress
  615. varsUpdate = true
  616. }
  617. for _, evt := range wDelayerEvents.NewHermezGovernanceDAOAddress {
  618. s.vars.WDelayer.HermezGovernanceDAOAddress = evt.NewHermezGovernanceDAOAddress
  619. varsUpdate = true
  620. }
  621. if varsUpdate {
  622. s.vars.WDelayer.EthBlockNum = blockNum
  623. wDelayerData.Vars = &s.vars.WDelayer
  624. }
  625. return &wDelayerData, nil
  626. }
  627. func getL1UserTx(eventsL1UserTx []eth.RollupEventL1UserTx, blockNum int64) ([]common.L1Tx, error) {
  628. l1Txs := make([]common.L1Tx, len(eventsL1UserTx))
  629. for i := range eventsL1UserTx {
  630. eventsL1UserTx[i].L1UserTx.EthBlockNum = blockNum
  631. // Check validity of L1UserTx
  632. l1Tx, err := common.NewL1Tx(&eventsL1UserTx[i].L1UserTx)
  633. if err != nil {
  634. return nil, err
  635. }
  636. l1Txs[i] = *l1Tx
  637. }
  638. return l1Txs, nil
  639. }