Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago |
|
package node
import ( "context" "errors" "fmt" "net" "net/http" "sync" "time"
"github.com/ethereum/go-ethereum/accounts" ethKeystore "github.com/ethereum/go-ethereum/accounts/keystore" "github.com/ethereum/go-ethereum/ethclient" "github.com/gin-contrib/cors" "github.com/gin-gonic/gin" "github.com/hermeznetwork/hermez-node/api" "github.com/hermeznetwork/hermez-node/batchbuilder" "github.com/hermeznetwork/hermez-node/common" "github.com/hermeznetwork/hermez-node/config" "github.com/hermeznetwork/hermez-node/coordinator" dbUtils "github.com/hermeznetwork/hermez-node/db" "github.com/hermeznetwork/hermez-node/db/historydb" "github.com/hermeznetwork/hermez-node/db/l2db" "github.com/hermeznetwork/hermez-node/db/statedb" "github.com/hermeznetwork/hermez-node/eth" "github.com/hermeznetwork/hermez-node/log" "github.com/hermeznetwork/hermez-node/priceupdater" "github.com/hermeznetwork/hermez-node/prover" "github.com/hermeznetwork/hermez-node/synchronizer" "github.com/hermeznetwork/hermez-node/test/debugapi" "github.com/hermeznetwork/hermez-node/txprocessor" "github.com/hermeznetwork/hermez-node/txselector" "github.com/hermeznetwork/tracerr" "github.com/jmoiron/sqlx" "github.com/russross/meddler" )
// Mode sets the working mode of the node (synchronizer or coordinator)
type Mode string
const ( // ModeCoordinator defines the mode of the HermezNode as Coordinator, which
// means that the node is set to forge (which also will be synchronizing with
// the L1 blockchain state)
ModeCoordinator Mode = "coordinator"
// ModeSynchronizer defines the mode of the HermezNode as Synchronizer, which
// means that the node is set to only synchronize with the L1 blockchain state
// and will not forge
ModeSynchronizer Mode = "synchronizer" )
// Node is the Hermez Node
type Node struct { nodeAPI *NodeAPI debugAPI *debugapi.DebugAPI priceUpdater *priceupdater.PriceUpdater // Coordinator
coord *coordinator.Coordinator
// Synchronizer
sync *synchronizer.Synchronizer
// General
cfg *config.Node mode Mode sqlConnRead *sqlx.DB sqlConnWrite *sqlx.DB historyDB *historydb.HistoryDB ctx context.Context wg sync.WaitGroup cancel context.CancelFunc }
// NewNode creates a Node
func NewNode(mode Mode, cfg *config.Node) (*Node, error) { meddler.Debug = cfg.Debug.MeddlerLogs // Stablish DB connection
dbWrite, err := dbUtils.InitSQLDB( cfg.PostgreSQL.PortWrite, cfg.PostgreSQL.HostWrite, cfg.PostgreSQL.UserWrite, cfg.PostgreSQL.PasswordWrite, cfg.PostgreSQL.NameWrite, ) if err != nil { return nil, tracerr.Wrap(fmt.Errorf("dbUtils.InitSQLDB: %w", err)) } var dbRead *sqlx.DB if cfg.PostgreSQL.HostRead == "" { dbRead = dbWrite } else if cfg.PostgreSQL.HostRead == cfg.PostgreSQL.HostWrite { return nil, tracerr.Wrap(fmt.Errorf( "PostgreSQL.HostRead and PostgreSQL.HostWrite must be different", )) } else { dbRead, err = dbUtils.InitSQLDB( cfg.PostgreSQL.PortRead, cfg.PostgreSQL.HostRead, cfg.PostgreSQL.UserRead, cfg.PostgreSQL.PasswordRead, cfg.PostgreSQL.NameRead, ) if err != nil { return nil, tracerr.Wrap(fmt.Errorf("dbUtils.InitSQLDB: %w", err)) } } var apiConnCon *dbUtils.APIConnectionController if cfg.API.Explorer || mode == ModeCoordinator { apiConnCon = dbUtils.NewAPICnnectionController( cfg.API.MaxSQLConnections, cfg.API.SQLConnectionTimeout.Duration, ) }
historyDB := historydb.NewHistoryDB(dbRead, dbWrite, apiConnCon)
ethClient, err := ethclient.Dial(cfg.Web3.URL) if err != nil { return nil, tracerr.Wrap(err) } var ethCfg eth.EthereumConfig var account *accounts.Account var keyStore *ethKeystore.KeyStore if mode == ModeCoordinator { ethCfg = eth.EthereumConfig{ CallGasLimit: 0, // cfg.Coordinator.EthClient.CallGasLimit,
GasPriceDiv: 0, // cfg.Coordinator.EthClient.GasPriceDiv,
}
scryptN := ethKeystore.StandardScryptN scryptP := ethKeystore.StandardScryptP if cfg.Coordinator.Debug.LightScrypt { scryptN = ethKeystore.LightScryptN scryptP = ethKeystore.LightScryptP } keyStore = ethKeystore.NewKeyStore(cfg.Coordinator.EthClient.Keystore.Path, scryptN, scryptP)
balance, err := ethClient.BalanceAt(context.TODO(), cfg.Coordinator.ForgerAddress, nil) if err != nil { return nil, tracerr.Wrap(err) }
minForgeBalance := cfg.Coordinator.MinimumForgeAddressBalance if minForgeBalance != nil && balance.Cmp(minForgeBalance) == -1 { return nil, tracerr.Wrap(fmt.Errorf( "forger account balance is less than cfg.Coordinator.MinimumForgeAddressBalance: %v < %v", balance.Int64(), minForgeBalance)) } log.Infow("forger ethereum account balance", "addr", cfg.Coordinator.ForgerAddress, "balance", balance.Int64(), "minForgeBalance", minForgeBalance.Int64(), )
// Unlock Coordinator ForgerAddr in the keystore to make calls
// to ForgeBatch in the smart contract
if !keyStore.HasAddress(cfg.Coordinator.ForgerAddress) { return nil, tracerr.Wrap(fmt.Errorf( "ethereum keystore doesn't have the key for address %v", cfg.Coordinator.ForgerAddress)) } account = &accounts.Account{ Address: cfg.Coordinator.ForgerAddress, } if err := keyStore.Unlock(*account, cfg.Coordinator.EthClient.Keystore.Password); err != nil { return nil, tracerr.Wrap(err) } log.Infow("Forger ethereum account unlocked in the keystore", "addr", cfg.Coordinator.ForgerAddress) } client, err := eth.NewClient(ethClient, account, keyStore, ð.ClientConfig{ Ethereum: ethCfg, Rollup: eth.RollupConfig{ Address: cfg.SmartContracts.Rollup, }, Auction: eth.AuctionConfig{ Address: cfg.SmartContracts.Auction, TokenHEZ: eth.TokenConfig{ Address: cfg.SmartContracts.TokenHEZ, Name: cfg.SmartContracts.TokenHEZName, }, }, WDelayer: eth.WDelayerConfig{ Address: cfg.SmartContracts.WDelayer, }, }) if err != nil { return nil, tracerr.Wrap(err) }
chainID, err := client.EthChainID() if err != nil { return nil, tracerr.Wrap(err) } if !chainID.IsUint64() { return nil, tracerr.Wrap(fmt.Errorf("chainID cannot be represented as uint64")) } chainIDU64 := chainID.Uint64() const maxUint16 uint64 = 0xffff if chainIDU64 > maxUint16 { return nil, tracerr.Wrap(fmt.Errorf("chainID overflows uint16")) } chainIDU16 := uint16(chainIDU64)
const safeStateDBKeep = 128 if cfg.StateDB.Keep < safeStateDBKeep { return nil, tracerr.Wrap(fmt.Errorf("cfg.StateDB.Keep = %v < %v, which is unsafe", cfg.StateDB.Keep, safeStateDBKeep)) } stateDB, err := statedb.NewStateDB(statedb.Config{ Path: cfg.StateDB.Path, Keep: cfg.StateDB.Keep, Type: statedb.TypeSynchronizer, NLevels: statedb.MaxNLevels, }) if err != nil { return nil, tracerr.Wrap(err) }
sync, err := synchronizer.NewSynchronizer(client, historyDB, stateDB, synchronizer.Config{ StatsRefreshPeriod: cfg.Synchronizer.StatsRefreshPeriod.Duration, ChainID: chainIDU16, }) if err != nil { return nil, tracerr.Wrap(err) } initSCVars := sync.SCVars()
scConsts := synchronizer.SCConsts{ Rollup: *sync.RollupConstants(), Auction: *sync.AuctionConstants(), WDelayer: *sync.WDelayerConstants(), }
if err := historyDB.SetInitialNodeInfo( cfg.Coordinator.L2DB.MaxTxs, cfg.Coordinator.L2DB.MinFeeUSD, &historydb.Constants{ RollupConstants: scConsts.Rollup, AuctionConstants: scConsts.Auction, WDelayerConstants: scConsts.WDelayer, ChainID: chainIDU16, HermezAddress: cfg.SmartContracts.Rollup, }, ); err != nil { return nil, tracerr.Wrap(err) }
var coord *coordinator.Coordinator var l2DB *l2db.L2DB if mode == ModeCoordinator { l2DB = l2db.NewL2DB( dbRead, dbWrite, cfg.Coordinator.L2DB.SafetyPeriod, cfg.Coordinator.L2DB.MaxTxs, cfg.Coordinator.L2DB.MinFeeUSD, cfg.Coordinator.L2DB.TTL.Duration, apiConnCon, )
// Unlock FeeAccount EthAddr in the keystore to generate the
// account creation authorization
if !keyStore.HasAddress(cfg.Coordinator.FeeAccount.Address) { return nil, tracerr.Wrap(fmt.Errorf( "ethereum keystore doesn't have the key for address %v", cfg.Coordinator.FeeAccount.Address)) } feeAccount := accounts.Account{ Address: cfg.Coordinator.FeeAccount.Address, } if err := keyStore.Unlock(feeAccount, cfg.Coordinator.EthClient.Keystore.Password); err != nil { return nil, tracerr.Wrap(err) } auth := &common.AccountCreationAuth{ EthAddr: cfg.Coordinator.FeeAccount.Address, BJJ: cfg.Coordinator.FeeAccount.BJJ, } if err := auth.Sign(func(msg []byte) ([]byte, error) { return keyStore.SignHash(feeAccount, msg) }, chainIDU16, cfg.SmartContracts.Rollup); err != nil { return nil, err } coordAccount := &txselector.CoordAccount{ Addr: cfg.Coordinator.FeeAccount.Address, BJJ: cfg.Coordinator.FeeAccount.BJJ, AccountCreationAuth: auth.Signature, } txSelector, err := txselector.NewTxSelector(coordAccount, cfg.Coordinator.TxSelector.Path, stateDB, l2DB) if err != nil { return nil, tracerr.Wrap(err) } batchBuilder, err := batchbuilder.NewBatchBuilder(cfg.Coordinator.BatchBuilder.Path, stateDB, 0, uint64(cfg.Coordinator.Circuit.NLevels)) if err != nil { return nil, tracerr.Wrap(err) } serverProofs := make([]prover.Client, len(cfg.Coordinator.ServerProofs)) for i, serverProofCfg := range cfg.Coordinator.ServerProofs { serverProofs[i] = prover.NewProofServerClient(serverProofCfg.URL, cfg.Coordinator.ProofServerPollInterval.Duration) }
txProcessorCfg := txprocessor.Config{ NLevels: uint32(cfg.Coordinator.Circuit.NLevels), MaxTx: uint32(cfg.Coordinator.Circuit.MaxTx), ChainID: chainIDU16, MaxFeeTx: common.RollupConstMaxFeeIdxCoordinator, MaxL1Tx: common.RollupConstMaxL1Tx, } var verifierIdx int if cfg.Coordinator.Debug.RollupVerifierIndex == nil { verifierIdx, err = scConsts.Rollup.FindVerifierIdx( cfg.Coordinator.Circuit.MaxTx, cfg.Coordinator.Circuit.NLevels, ) if err != nil { return nil, tracerr.Wrap(err) } log.Infow("Found verifier that matches circuit config", "verifierIdx", verifierIdx) } else { verifierIdx = *cfg.Coordinator.Debug.RollupVerifierIndex log.Infow("Using debug verifier index from config", "verifierIdx", verifierIdx) if verifierIdx >= len(scConsts.Rollup.Verifiers) { return nil, tracerr.Wrap( fmt.Errorf("verifierIdx (%v) >= "+ "len(scConsts.Rollup.Verifiers) (%v)", verifierIdx, len(scConsts.Rollup.Verifiers))) } verifier := scConsts.Rollup.Verifiers[verifierIdx] if verifier.MaxTx != cfg.Coordinator.Circuit.MaxTx || verifier.NLevels != cfg.Coordinator.Circuit.NLevels { return nil, tracerr.Wrap( fmt.Errorf("Circuit config and verifier params don't match. "+ "circuit.MaxTx = %v, circuit.NLevels = %v, "+ "verifier.MaxTx = %v, verifier.NLevels = %v", cfg.Coordinator.Circuit.MaxTx, cfg.Coordinator.Circuit.NLevels, verifier.MaxTx, verifier.NLevels, )) } }
coord, err = coordinator.NewCoordinator( coordinator.Config{ ForgerAddress: cfg.Coordinator.ForgerAddress, ConfirmBlocks: cfg.Coordinator.ConfirmBlocks, L1BatchTimeoutPerc: cfg.Coordinator.L1BatchTimeoutPerc, ForgeRetryInterval: cfg.Coordinator.ForgeRetryInterval.Duration, ForgeDelay: cfg.Coordinator.ForgeDelay.Duration, ForgeNoTxsDelay: cfg.Coordinator.ForgeNoTxsDelay.Duration, SyncRetryInterval: cfg.Coordinator.SyncRetryInterval.Duration, PurgeByExtDelInterval: cfg.Coordinator.PurgeByExtDelInterval.Duration, EthClientAttempts: cfg.Coordinator.EthClient.Attempts, EthClientAttemptsDelay: cfg.Coordinator.EthClient.AttemptsDelay.Duration, EthNoReuseNonce: cfg.Coordinator.EthClient.NoReuseNonce, EthTxResendTimeout: cfg.Coordinator.EthClient.TxResendTimeout.Duration, MaxGasPrice: cfg.Coordinator.EthClient.MaxGasPrice, GasPriceIncPerc: cfg.Coordinator.EthClient.GasPriceIncPerc, TxManagerCheckInterval: cfg.Coordinator.EthClient.CheckLoopInterval.Duration, DebugBatchPath: cfg.Coordinator.Debug.BatchPath, Purger: coordinator.PurgerCfg{ PurgeBatchDelay: cfg.Coordinator.L2DB.PurgeBatchDelay, InvalidateBatchDelay: cfg.Coordinator.L2DB.InvalidateBatchDelay, PurgeBlockDelay: cfg.Coordinator.L2DB.PurgeBlockDelay, InvalidateBlockDelay: cfg.Coordinator.L2DB.InvalidateBlockDelay, }, ForgeBatchGasCost: cfg.Coordinator.EthClient.ForgeBatchGasCost, VerifierIdx: uint8(verifierIdx), TxProcessorConfig: txProcessorCfg, }, historyDB, l2DB, txSelector, batchBuilder, serverProofs, client, &scConsts, &synchronizer.SCVariables{ Rollup: *initSCVars.Rollup, Auction: *initSCVars.Auction, WDelayer: *initSCVars.WDelayer, }, ) if err != nil { return nil, tracerr.Wrap(err) } } var nodeAPI *NodeAPI if cfg.API.Address != "" { if cfg.Debug.GinDebugMode { gin.SetMode(gin.DebugMode) } else { gin.SetMode(gin.ReleaseMode) } if cfg.API.UpdateMetricsInterval.Duration == 0 { return nil, tracerr.Wrap(fmt.Errorf("invalid cfg.API.UpdateMetricsInterval: %v", cfg.API.UpdateMetricsInterval.Duration)) } if cfg.API.UpdateRecommendedFeeInterval.Duration == 0 { return nil, tracerr.Wrap(fmt.Errorf("invalid cfg.API.UpdateRecommendedFeeInterval: %v", cfg.API.UpdateRecommendedFeeInterval.Duration)) } server := gin.Default() coord := false if mode == ModeCoordinator { coord = cfg.Coordinator.API.Coordinator } var err error nodeAPI, err = NewNodeAPI( cfg.API.Address, coord, cfg.API.Explorer, server, historyDB, l2DB, ) if err != nil { return nil, tracerr.Wrap(err) } } var debugAPI *debugapi.DebugAPI if cfg.Debug.APIAddress != "" { debugAPI = debugapi.NewDebugAPI(cfg.Debug.APIAddress, stateDB, sync) } priceUpdater, err := priceupdater.NewPriceUpdater(cfg.PriceUpdater.URL, priceupdater.APIType(cfg.PriceUpdater.Type), historyDB) if err != nil { return nil, tracerr.Wrap(err) } ctx, cancel := context.WithCancel(context.Background()) return &Node{ nodeAPI: nodeAPI, debugAPI: debugAPI, priceUpdater: priceUpdater, coord: coord, sync: sync, cfg: cfg, mode: mode, sqlConnRead: dbRead, sqlConnWrite: dbWrite, historyDB: historyDB, ctx: ctx, cancel: cancel, }, nil }
// APIServer is a server that only runs the API
type APIServer struct { nodeAPI *NodeAPI }
func NewAPIServer(mode Mode, cfg *config.APIServer) (*APIServer, error) { // NOTE: I just copied some parts of NewNode related to starting the
// API, but it still cotains many parameters that are not available
meddler.Debug = cfg.Debug.MeddlerLogs // Stablish DB connection
dbWrite, err := dbUtils.InitSQLDB( cfg.PostgreSQL.PortWrite, cfg.PostgreSQL.HostWrite, cfg.PostgreSQL.UserWrite, cfg.PostgreSQL.PasswordWrite, cfg.PostgreSQL.NameWrite, ) if err != nil { return nil, tracerr.Wrap(fmt.Errorf("dbUtils.InitSQLDB: %w", err)) } var dbRead *sqlx.DB if cfg.PostgreSQL.HostRead == "" { dbRead = dbWrite } else if cfg.PostgreSQL.HostRead == cfg.PostgreSQL.HostWrite { return nil, tracerr.Wrap(fmt.Errorf( "PostgreSQL.HostRead and PostgreSQL.HostWrite must be different", )) } else { dbRead, err = dbUtils.InitSQLDB( cfg.PostgreSQL.PortRead, cfg.PostgreSQL.HostRead, cfg.PostgreSQL.UserRead, cfg.PostgreSQL.PasswordRead, cfg.PostgreSQL.NameRead, ) if err != nil { return nil, tracerr.Wrap(fmt.Errorf("dbUtils.InitSQLDB: %w", err)) } } var apiConnCon *dbUtils.APIConnectionController if cfg.API.Explorer || mode == ModeCoordinator { apiConnCon = dbUtils.NewAPICnnectionController( cfg.API.MaxSQLConnections, cfg.API.SQLConnectionTimeout.Duration, ) }
historyDB := historydb.NewHistoryDB(dbRead, dbWrite, apiConnCon)
var l2DB *l2db.L2DB if mode == ModeCoordinator { l2DB = l2db.NewL2DB( dbRead, dbWrite, cfg.L2DB.SafetyPeriod, cfg.L2DB.MaxTxs, cfg.L2DB.MinFeeUSD, cfg.L2DB, apiConnCon, ) }
var nodeAPI *NodeAPI if cfg.API.Address != "" { if cfg.Debug.GinDebugMode { gin.SetMode(gin.DebugMode) } else { gin.SetMode(gin.ReleaseMode) } if cfg.API.UpdateMetricsInterval.Duration == 0 { return nil, tracerr.Wrap(fmt.Errorf("invalid cfg.API.UpdateMetricsInterval: %v", cfg.API.UpdateMetricsInterval.Duration)) } if cfg.API.UpdateRecommendedFeeInterval.Duration == 0 { return nil, tracerr.Wrap(fmt.Errorf("invalid cfg.API.UpdateRecommendedFeeInterval: %v", cfg.API.UpdateRecommendedFeeInterval.Duration)) } server := gin.Default() coord := false if mode == ModeCoordinator { coord = cfg.Coordinator.API.Coordinator } var err error nodeAPI, err = NewNodeAPI( cfg.API.Address, coord, cfg.API.Explorer, server, historyDB, l2DB, ) if err != nil { return nil, tracerr.Wrap(err) } } // ETC...
}
// NodeAPI holds the node http API
type NodeAPI struct { //nolint:golint
api *api.API engine *gin.Engine addr string }
func handleNoRoute(c *gin.Context) { c.JSON(http.StatusNotFound, gin.H{ "error": "404 page not found", }) }
// NewNodeAPI creates a new NodeAPI (which internally calls api.NewAPI)
func NewNodeAPI( addr string, coordinatorEndpoints, explorerEndpoints bool, server *gin.Engine, hdb *historydb.HistoryDB, l2db *l2db.L2DB, ) (*NodeAPI, error) { engine := gin.Default() engine.NoRoute(handleNoRoute) engine.Use(cors.Default()) _api, err := api.NewAPI( coordinatorEndpoints, explorerEndpoints, engine, hdb, l2db, ) if err != nil { return nil, tracerr.Wrap(err) } return &NodeAPI{ addr: addr, api: _api, engine: engine, }, nil }
// Run starts the http server of the NodeAPI. To stop it, pass a context with
// cancelation.
func (a *NodeAPI) Run(ctx context.Context) error { server := &http.Server{ Handler: a.engine, // TODO: Figure out best parameters for production
ReadTimeout: 30 * time.Second, //nolint:gomnd
WriteTimeout: 30 * time.Second, //nolint:gomnd
MaxHeaderBytes: 1 << 20, //nolint:gomnd
} listener, err := net.Listen("tcp", a.addr) if err != nil { return tracerr.Wrap(err) } log.Infof("NodeAPI is ready at %v", a.addr) go func() { if err := server.Serve(listener); err != nil && tracerr.Unwrap(err) != http.ErrServerClosed { log.Fatalf("Listen: %s\n", err) } }()
<-ctx.Done() log.Info("Stopping NodeAPI...") ctxTimeout, cancel := context.WithTimeout(context.Background(), 10*time.Second) //nolint:gomnd
defer cancel() if err := server.Shutdown(ctxTimeout); err != nil { return tracerr.Wrap(err) } log.Info("NodeAPI done") return nil }
func (n *Node) handleNewBlock(ctx context.Context, stats *synchronizer.Stats, vars synchronizer.SCVariablesPtr, batches []common.BatchData) { if n.mode == ModeCoordinator { n.coord.SendMsg(ctx, coordinator.MsgSyncBlock{ Stats: *stats, Vars: vars, Batches: batches, }) } if n.nodeAPI != nil { if vars.Rollup != nil { n.historyDB.SetRollupVariables(*vars.Rollup) } if vars.Auction != nil { n.historyDB.SetAuctionVariables(*vars.Auction) } if vars.WDelayer != nil { n.historyDB.SetWDelayerVariables(*vars.WDelayer) }
if stats.Synced() { if err := n.historyDB.UpdateNetworkInfo( stats.Eth.LastBlock, stats.Sync.LastBlock, common.BatchNum(stats.Eth.LastBatchNum), stats.Sync.Auction.CurrentSlot.SlotNum, ); err != nil { log.Errorw("API.UpdateNetworkInfo", "err", err) } } else { n.historyDB.UpdateNetworkInfoBlock( stats.Eth.LastBlock, stats.Sync.LastBlock, ) } } }
func (n *Node) handleReorg(ctx context.Context, stats *synchronizer.Stats, vars synchronizer.SCVariablesPtr) { if n.mode == ModeCoordinator { n.coord.SendMsg(ctx, coordinator.MsgSyncReorg{ Stats: *stats, Vars: vars, }) } vars = n.sync.SCVars() n.historyDB.SetRollupVariables(*vars.Rollup) n.historyDB.SetAuctionVariables(*vars.Auction) n.historyDB.SetWDelayerVariables(*vars.WDelayer) n.historyDB.UpdateNetworkInfoBlock( stats.Eth.LastBlock, stats.Sync.LastBlock, ) }
// TODO(Edu): Consider keeping the `lastBlock` inside synchronizer so that we
// don't have to pass it around.
func (n *Node) syncLoopFn(ctx context.Context, lastBlock *common.Block) (*common.Block, time.Duration, error) { blockData, discarded, err := n.sync.Sync(ctx, lastBlock) stats := n.sync.Stats() if err != nil { // case: error
return nil, n.cfg.Synchronizer.SyncLoopInterval.Duration, tracerr.Wrap(err) } else if discarded != nil { // case: reorg
log.Infow("Synchronizer.Sync reorg", "discarded", *discarded) vars := n.sync.SCVars() n.handleReorg(ctx, stats, vars) return nil, time.Duration(0), nil } else if blockData != nil { // case: new block
vars := synchronizer.SCVariablesPtr{ Rollup: blockData.Rollup.Vars, Auction: blockData.Auction.Vars, WDelayer: blockData.WDelayer.Vars, } n.handleNewBlock(ctx, stats, vars, blockData.Rollup.Batches) return &blockData.Block, time.Duration(0), nil } else { // case: no block
return lastBlock, n.cfg.Synchronizer.SyncLoopInterval.Duration, nil } }
// StartSynchronizer starts the synchronizer
func (n *Node) StartSynchronizer() { log.Info("Starting Synchronizer...")
// Trigger a manual call to handleNewBlock with the loaded state of the
// synchronizer in order to quickly activate the API and Coordinator
// and avoid waiting for the next block. Without this, the API and
// Coordinator will not react until the following block (starting from
// the last synced one) is synchronized
stats := n.sync.Stats() vars := n.sync.SCVars() n.handleNewBlock(n.ctx, stats, vars, []common.BatchData{})
n.wg.Add(1) go func() { var err error var lastBlock *common.Block waitDuration := time.Duration(0) for { select { case <-n.ctx.Done(): log.Info("Synchronizer done") n.wg.Done() return case <-time.After(waitDuration): if lastBlock, waitDuration, err = n.syncLoopFn(n.ctx, lastBlock); err != nil { if n.ctx.Err() != nil { continue } if errors.Is(err, eth.ErrBlockHashMismatchEvent) { log.Warnw("Synchronizer.Sync", "err", err) } else if errors.Is(err, synchronizer.ErrUnknownBlock) { log.Warnw("Synchronizer.Sync", "err", err) } else { log.Errorw("Synchronizer.Sync", "err", err) } } } } }()
n.wg.Add(1) go func() { for { select { case <-n.ctx.Done(): log.Info("PriceUpdater done") n.wg.Done() return case <-time.After(n.cfg.PriceUpdater.Interval.Duration): if err := n.priceUpdater.UpdateTokenList(); err != nil { log.Errorw("PriceUpdater.UpdateTokenList()", "err", err) } n.priceUpdater.UpdatePrices(n.ctx) } } }() }
// StartDebugAPI starts the DebugAPI
func (n *Node) StartDebugAPI() { log.Info("Starting DebugAPI...") n.wg.Add(1) go func() { defer func() { log.Info("DebugAPI routine stopped") n.wg.Done() }() if err := n.debugAPI.Run(n.ctx); err != nil { if n.ctx.Err() != nil { return } log.Fatalw("DebugAPI.Run", "err", err) } }() }
// StartNodeAPI starts the NodeAPI
func (n *Node) StartNodeAPI() { log.Info("Starting NodeAPI...") n.wg.Add(1) go func() { defer func() { log.Info("NodeAPI routine stopped") n.wg.Done() }() if err := n.nodeAPI.Run(n.ctx); err != nil { if n.ctx.Err() != nil { return } log.Fatalw("NodeAPI.Run", "err", err) } }()
n.wg.Add(1) go func() { // Do an initial update on startup
if err := n.historyDB.UpdateMetrics(); err != nil { log.Errorw("API.UpdateMetrics", "err", err) } for { select { case <-n.ctx.Done(): log.Info("API.UpdateMetrics loop done") n.wg.Done() return case <-time.After(n.cfg.API.UpdateMetricsInterval.Duration): if err := n.historyDB.UpdateMetrics(); err != nil { log.Errorw("API.UpdateMetrics", "err", err) } } } }()
n.wg.Add(1) go func() { // Do an initial update on startup
if err := n.historyDB.UpdateRecommendedFee(); err != nil { log.Errorw("API.UpdateRecommendedFee", "err", err) } for { select { case <-n.ctx.Done(): log.Info("API.UpdateRecommendedFee loop done") n.wg.Done() return case <-time.After(n.cfg.API.UpdateRecommendedFeeInterval.Duration): if err := n.historyDB.UpdateRecommendedFee(); err != nil { log.Errorw("API.UpdateRecommendedFee", "err", err) } } } }() }
// Start the node
func (n *Node) Start() { log.Infow("Starting node...", "mode", n.mode) if n.debugAPI != nil { n.StartDebugAPI() } if n.nodeAPI != nil { n.StartNodeAPI() } if n.mode == ModeCoordinator { log.Info("Starting Coordinator...") n.coord.Start() } n.StartSynchronizer() }
// Stop the node
func (n *Node) Stop() { log.Infow("Stopping node...") n.cancel() n.wg.Wait() if n.mode == ModeCoordinator { log.Info("Stopping Coordinator...") n.coord.Stop() } // Close kv DBs
n.sync.StateDB().Close() if n.mode == ModeCoordinator { n.coord.TxSelector().LocalAccountsDB().Close() n.coord.BatchBuilder().LocalStateDB().Close() } }
|