Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Update missing parts, improve til, and more
- Node
- Updated configuration to initialize the interface to all the smart
contracts
- Common
- Moved BlockData and BatchData types to common so that they can be
shared among: historydb, til and synchronizer
- Remove hash.go (it was never used)
- Remove slot.go (it was never used)
- Remove smartcontractparams.go (it was never used, and appropriate
structs are defined in `eth/`)
- Comment state / status method until requirements of this method are
properly defined, and move it to Synchronizer
- Synchronizer
- Simplify `Sync` routine to only sync one block per call, and return
useful information.
- Use BlockData and BatchData from common
- Check that events belong to the expected block hash
- In L1Batch, query L1UserTxs from HistoryDB
- Fill ERC20 token information
- Test AddTokens with test.Client
- HistryDB
- Use BlockData and BatchData from common
- Add `GetAllTokens` method
- Uncomment and update GetL1UserTxs (with corresponding tests)
- Til
- Rename all instances of RegisterToken to AddToken (to follow the smart
contract implementation naming)
- Use BlockData and BatchData from common
- Move testL1CoordinatorTxs and testL2Txs to a separate struct
from BatchData in Context
- Start Context with BatchNum = 1 (which the protocol defines to be the
first batchNum)
- In every Batch, set StateRoot and ExitRoot to a non-nil big.Int
(zero).
- In all L1Txs, if LoadAmount is not used, set it to 0; if Amount is not
used, set it to 0; so that no *big.Int is nil.
- In L1UserTx, don't set BatchNum, because when L1UserTxs are created
and obtained by the synchronizer, the BatchNum is not known yet (it's
a synchronizer job to set it)
- In L1UserTxs, set `UserOrigin` and set `ToForgeL1TxsNum`.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Fix exit table, set delayed_withdrawn in exits
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago |
|
package historydb
import ( "database/sql" "fmt" "math" "math/big" "os" "strings" "testing" "time"
ethCommon "github.com/ethereum/go-ethereum/common" "github.com/hermeznetwork/hermez-node/common" dbUtils "github.com/hermeznetwork/hermez-node/db" "github.com/hermeznetwork/hermez-node/log" "github.com/hermeznetwork/hermez-node/test" "github.com/hermeznetwork/hermez-node/test/til" "github.com/hermeznetwork/tracerr" "github.com/stretchr/testify/assert" "github.com/stretchr/testify/require" )
var historyDB *HistoryDB var historyDBWithACC *HistoryDB
// In order to run the test you need to run a Posgres DB with
// a database named "history" that is accessible by
// user: "hermez"
// pass: set it using the env var POSTGRES_PASS
// This can be achieved by running: POSTGRES_PASS=your_strong_pass && sudo docker run --rm --name hermez-db-test -p 5432:5432 -e POSTGRES_DB=history -e POSTGRES_USER=hermez -e POSTGRES_PASSWORD=$POSTGRES_PASS -d postgres && sleep 2s && sudo docker exec -it hermez-db-test psql -a history -U hermez -c "CREATE DATABASE l2;"
// After running the test you can stop the container by running: sudo docker kill hermez-db-test
// If you already did that for the L2DB you don't have to do it again
func TestMain(m *testing.M) { // init DB
pass := os.Getenv("POSTGRES_PASS") db, err := dbUtils.InitSQLDB(5432, "localhost", "hermez", pass, "hermez") if err != nil { panic(err) } historyDB = NewHistoryDB(db, db, nil) if err != nil { panic(err) } apiConnCon := dbUtils.NewAPICnnectionController(1, time.Second) historyDBWithACC = NewHistoryDB(db, db, apiConnCon) // Run tests
result := m.Run() // Close DB
if err := db.Close(); err != nil { log.Error("Error closing the history DB:", err) } os.Exit(result) }
func TestBlocks(t *testing.T) { var fromBlock, toBlock int64 fromBlock = 0 toBlock = 7 // Reset DB
test.WipeDB(historyDB.DB()) // Generate blocks using til
set1 := ` Type: Blockchain // block 0 is stored as default in the DB
// block 1 does not exist
> block // blockNum=2
> block // blockNum=3
> block // blockNum=4
> block // blockNum=5
> block // blockNum=6
` tc := til.NewContext(uint16(0), 1) blocks, err := tc.GenerateBlocks(set1) require.NoError(t, err) // Save timestamp of a block with UTC and change it without UTC
timestamp := time.Now().Add(time.Second * 13) blocks[fromBlock].Block.Timestamp = timestamp // Insert blocks into DB
for i := 0; i < len(blocks); i++ { err := historyDB.AddBlock(&blocks[i].Block) assert.NoError(t, err) } // Add block 0 to the generated blocks
blocks = append( []common.BlockData{{Block: test.Block0}}, //nolint:gofmt
blocks..., ) // Get all blocks from DB
fetchedBlocks, err := historyDB.getBlocks(fromBlock, toBlock) assert.Equal(t, len(blocks), len(fetchedBlocks)) // Compare generated vs getted blocks
assert.NoError(t, err) for i := range fetchedBlocks { assertEqualBlock(t, &blocks[i].Block, &fetchedBlocks[i]) } // Compare saved timestamp vs getted
nameZoneUTC, offsetUTC := timestamp.UTC().Zone() zoneFetchedBlock, offsetFetchedBlock := fetchedBlocks[fromBlock].Timestamp.Zone() assert.Equal(t, nameZoneUTC, zoneFetchedBlock) assert.Equal(t, offsetUTC, offsetFetchedBlock) // Get blocks from the DB one by one
for i := int64(2); i < toBlock; i++ { // avoid block 0 for simplicity
fetchedBlock, err := historyDB.GetBlock(i) assert.NoError(t, err) assertEqualBlock(t, &blocks[i-1].Block, fetchedBlock) } // Get last block
lastBlock, err := historyDB.GetLastBlock() assert.NoError(t, err) assertEqualBlock(t, &blocks[len(blocks)-1].Block, lastBlock) }
func assertEqualBlock(t *testing.T, expected *common.Block, actual *common.Block) { assert.Equal(t, expected.Num, actual.Num) assert.Equal(t, expected.Hash, actual.Hash) assert.Equal(t, expected.Timestamp.Unix(), actual.Timestamp.Unix()) }
func TestBatches(t *testing.T) { // Reset DB
test.WipeDB(historyDB.DB()) // Generate batches using til (and blocks for foreign key)
set := ` Type: Blockchain AddToken(1) // Will have value in USD
AddToken(2) // Will NOT have value in USD
CreateAccountDeposit(1) A: 2000 CreateAccountDeposit(2) A: 2000 CreateAccountDeposit(1) B: 1000 CreateAccountDeposit(2) B: 1000 > batchL1 > batchL1 Transfer(1) A-B: 100 (5) Transfer(2) B-A: 100 (199) > batch // batchNum=2, L2 only batch, forges transfers (mixed case of with(out) USD value)
> block Transfer(1) A-B: 100 (5) > batch // batchNum=3, L2 only batch, forges transfer (with USD value)
Transfer(2) B-A: 100 (199) > batch // batchNum=4, L2 only batch, forges transfer (without USD value)
> block ` tc := til.NewContext(uint16(0), common.RollupConstMaxL1UserTx) tilCfgExtra := til.ConfigExtra{ BootCoordAddr: ethCommon.HexToAddress("0xE39fEc6224708f0772D2A74fd3f9055A90E0A9f2"), CoordUser: "A", } blocks, err := tc.GenerateBlocks(set) require.NoError(t, err) err = tc.FillBlocksExtra(blocks, &tilCfgExtra) require.NoError(t, err) // Insert to DB
batches := []common.Batch{} tokensValue := make(map[common.TokenID]float64) lastL1TxsNum := new(int64) lastL1BatchBlockNum := int64(0) for _, block := range blocks { // Insert block
assert.NoError(t, historyDB.AddBlock(&block.Block)) // Insert tokens
for i, token := range block.Rollup.AddedTokens { assert.NoError(t, historyDB.AddToken(&token)) //nolint:gosec
if i%2 != 0 { // Set value to the token
value := (float64(i) + 5) * 5.389329 assert.NoError(t, historyDB.UpdateTokenValue(token.Symbol, value)) tokensValue[token.TokenID] = value / math.Pow(10, float64(token.Decimals)) } } // Combine all generated batches into single array
for _, batch := range block.Rollup.Batches { batches = append(batches, batch.Batch) forgeTxsNum := batch.Batch.ForgeL1TxsNum if forgeTxsNum != nil && (lastL1TxsNum == nil || *lastL1TxsNum < *forgeTxsNum) { *lastL1TxsNum = *forgeTxsNum lastL1BatchBlockNum = batch.Batch.EthBlockNum } } } // Insert batches
assert.NoError(t, historyDB.AddBatches(batches)) // Set expected total fee
for _, batch := range batches { total := .0 for tokenID, amount := range batch.CollectedFees { af := new(big.Float).SetInt(amount) amountFloat, _ := af.Float64() total += tokensValue[tokenID] * amountFloat } batch.TotalFeesUSD = &total } // Get batches from the DB
fetchedBatches, err := historyDB.GetBatches(0, common.BatchNum(len(batches)+1)) assert.NoError(t, err) assert.Equal(t, len(batches), len(fetchedBatches)) for i, fetchedBatch := range fetchedBatches { assert.Equal(t, batches[i], fetchedBatch) } // Test GetLastBatchNum
fetchedLastBatchNum, err := historyDB.GetLastBatchNum() assert.NoError(t, err) assert.Equal(t, batches[len(batches)-1].BatchNum, fetchedLastBatchNum) // Test GetLastBatch
fetchedLastBatch, err := historyDB.GetLastBatch() assert.NoError(t, err) assert.Equal(t, &batches[len(batches)-1], fetchedLastBatch) // Test GetLastL1TxsNum
fetchedLastL1TxsNum, err := historyDB.GetLastL1TxsNum() assert.NoError(t, err) assert.Equal(t, lastL1TxsNum, fetchedLastL1TxsNum) // Test GetLastL1BatchBlockNum
fetchedLastL1BatchBlockNum, err := historyDB.GetLastL1BatchBlockNum() assert.NoError(t, err) assert.Equal(t, lastL1BatchBlockNum, fetchedLastL1BatchBlockNum) // Test GetBatch
fetchedBatch, err := historyDB.GetBatch(1) require.NoError(t, err) assert.Equal(t, &batches[0], fetchedBatch) _, err = historyDB.GetBatch(common.BatchNum(len(batches) + 1)) assert.Equal(t, sql.ErrNoRows, tracerr.Unwrap(err)) }
func TestBids(t *testing.T) { const fromBlock int64 = 1 const toBlock int64 = 5 // Prepare blocks in the DB
blocks := setTestBlocks(fromBlock, toBlock) // Generate fake coordinators
const nCoords = 5 coords := test.GenCoordinators(nCoords, blocks) err := historyDB.AddCoordinators(coords) assert.NoError(t, err) // Generate fake bids
const nBids = 20 bids := test.GenBids(nBids, blocks, coords) err = historyDB.AddBids(bids) assert.NoError(t, err) // Fetch bids
fetchedBids, err := historyDB.GetAllBids() assert.NoError(t, err) // Compare fetched bids vs generated bids
for i, bid := range fetchedBids { assert.Equal(t, bids[i], bid) } }
func TestTokens(t *testing.T) { const fromBlock int64 = 1 const toBlock int64 = 5 // Prepare blocks in the DB
blocks := setTestBlocks(fromBlock, toBlock) // Generate fake tokens
const nTokens = 5 tokens, ethToken := test.GenTokens(nTokens, blocks) err := historyDB.AddTokens(tokens) assert.NoError(t, err) tokens = append([]common.Token{ethToken}, tokens...) // Fetch tokens
fetchedTokens, err := historyDB.GetTokensTest() assert.NoError(t, err) // Compare fetched tokens vs generated tokens
// All the tokens should have USDUpdate setted by the DB trigger
for i, token := range fetchedTokens { assert.Equal(t, tokens[i].TokenID, token.TokenID) assert.Equal(t, tokens[i].EthBlockNum, token.EthBlockNum) assert.Equal(t, tokens[i].EthAddr, token.EthAddr) assert.Equal(t, tokens[i].Name, token.Name) assert.Equal(t, tokens[i].Symbol, token.Symbol) assert.Nil(t, token.USD) assert.Nil(t, token.USDUpdate) }
// Update token value
for i, token := range tokens { value := 1.01 * float64(i) assert.NoError(t, historyDB.UpdateTokenValue(token.Symbol, value)) } // Fetch tokens
fetchedTokens, err = historyDB.GetTokensTest() assert.NoError(t, err) // Compare fetched tokens vs generated tokens
// All the tokens should have USDUpdate setted by the DB trigger
for i, token := range fetchedTokens { value := 1.01 * float64(i) assert.Equal(t, value, *token.USD) nameZone, offset := token.USDUpdate.Zone() assert.Equal(t, "UTC", nameZone) assert.Equal(t, 0, offset) } }
func TestTokensUTF8(t *testing.T) { // Reset DB
test.WipeDB(historyDB.DB()) const fromBlock int64 = 1 const toBlock int64 = 5 // Prepare blocks in the DB
blocks := setTestBlocks(fromBlock, toBlock) // Generate fake tokens
const nTokens = 5 tokens, ethToken := test.GenTokens(nTokens, blocks) nonUTFTokens := make([]common.Token, len(tokens)+1) // Force token.name and token.symbol to be non UTF-8 Strings
for i, token := range tokens { token.Name = fmt.Sprint("NON-UTF8-NAME-\xc5-", i) token.Symbol = fmt.Sprint("S-\xc5-", i) tokens[i] = token nonUTFTokens[i] = token } err := historyDB.AddTokens(tokens) assert.NoError(t, err) // Work with nonUTFTokens as tokens one gets updated and non UTF-8 characters are lost
nonUTFTokens = append([]common.Token{ethToken}, nonUTFTokens...) // Fetch tokens
fetchedTokens, err := historyDB.GetTokensTest() assert.NoError(t, err) // Compare fetched tokens vs generated tokens
// All the tokens should have USDUpdate setted by the DB trigger
for i, token := range fetchedTokens { assert.Equal(t, nonUTFTokens[i].TokenID, token.TokenID) assert.Equal(t, nonUTFTokens[i].EthBlockNum, token.EthBlockNum) assert.Equal(t, nonUTFTokens[i].EthAddr, token.EthAddr) assert.Equal(t, strings.ToValidUTF8(nonUTFTokens[i].Name, " "), token.Name) assert.Equal(t, strings.ToValidUTF8(nonUTFTokens[i].Symbol, " "), token.Symbol) assert.Nil(t, token.USD) assert.Nil(t, token.USDUpdate) }
// Update token value
for i, token := range nonUTFTokens { value := 1.01 * float64(i) assert.NoError(t, historyDB.UpdateTokenValue(token.Symbol, value)) } // Fetch tokens
fetchedTokens, err = historyDB.GetTokensTest() assert.NoError(t, err) // Compare fetched tokens vs generated tokens
// All the tokens should have USDUpdate setted by the DB trigger
for i, token := range fetchedTokens { value := 1.01 * float64(i) assert.Equal(t, value, *token.USD) nameZone, offset := token.USDUpdate.Zone() assert.Equal(t, "UTC", nameZone) assert.Equal(t, 0, offset) } }
func TestAccounts(t *testing.T) { const fromBlock int64 = 1 const toBlock int64 = 5 // Prepare blocks in the DB
blocks := setTestBlocks(fromBlock, toBlock) // Generate fake tokens
const nTokens = 5 tokens, ethToken := test.GenTokens(nTokens, blocks) err := historyDB.AddTokens(tokens) assert.NoError(t, err) tokens = append([]common.Token{ethToken}, tokens...) // Generate fake batches
const nBatches = 10 batches := test.GenBatches(nBatches, blocks) err = historyDB.AddBatches(batches) assert.NoError(t, err) // Generate fake accounts
const nAccounts = 3 accs := test.GenAccounts(nAccounts, 0, tokens, nil, nil, batches) err = historyDB.AddAccounts(accs) assert.NoError(t, err) // Fetch accounts
fetchedAccs, err := historyDB.GetAllAccounts() assert.NoError(t, err) // Compare fetched accounts vs generated accounts
for i, acc := range fetchedAccs { accs[i].Balance = nil assert.Equal(t, accs[i], acc) } // Test AccountBalances
accUpdates := make([]common.AccountUpdate, len(accs)) for i, acc := range accs { accUpdates[i] = common.AccountUpdate{ EthBlockNum: batches[acc.BatchNum-1].EthBlockNum, BatchNum: acc.BatchNum, Idx: acc.Idx, Nonce: common.Nonce(i), Balance: big.NewInt(int64(i)), } } err = historyDB.AddAccountUpdates(accUpdates) require.NoError(t, err) fetchedAccBalances, err := historyDB.GetAllAccountUpdates() require.NoError(t, err) assert.Equal(t, accUpdates, fetchedAccBalances) }
func TestTxs(t *testing.T) { // Reset DB
test.WipeDB(historyDB.DB())
set := ` Type: Blockchain AddToken(1) AddToken(2) CreateAccountDeposit(1) A: 10 CreateAccountDeposit(1) B: 10 > batchL1 > batchL1 > block CreateAccountDepositTransfer(1) C-A: 20, 10 CreateAccountCoordinator(1) User0 > batchL1 > batchL1 > block
Deposit(1) B: 10 Deposit(1) C: 10 Transfer(1) C-A : 10 (1) Transfer(1) B-C : 10 (1) Transfer(1) A-B : 10 (1) Exit(1) A: 10 (1) > batch > block DepositTransfer(1) A-B: 10, 10 > batchL1 > block
ForceTransfer(1) A-B: 10 ForceExit(1) A: 5 > batchL1 > batchL1 > block
CreateAccountDeposit(2) D: 10 > batchL1 > block
CreateAccountDeposit(2) E: 10 > batchL1 > batchL1 > block
` tc := til.NewContext(uint16(0), common.RollupConstMaxL1UserTx) tilCfgExtra := til.ConfigExtra{ BootCoordAddr: ethCommon.HexToAddress("0xE39fEc6224708f0772D2A74fd3f9055A90E0A9f2"), CoordUser: "A", } blocks, err := tc.GenerateBlocks(set) require.NoError(t, err) err = tc.FillBlocksExtra(blocks, &tilCfgExtra) require.NoError(t, err)
// Sanity check
require.Equal(t, 7, len(blocks)) require.Equal(t, 2, len(blocks[0].Rollup.L1UserTxs)) require.Equal(t, 1, len(blocks[1].Rollup.L1UserTxs)) require.Equal(t, 2, len(blocks[2].Rollup.L1UserTxs)) require.Equal(t, 1, len(blocks[3].Rollup.L1UserTxs)) require.Equal(t, 2, len(blocks[4].Rollup.L1UserTxs)) require.Equal(t, 1, len(blocks[5].Rollup.L1UserTxs)) require.Equal(t, 1, len(blocks[6].Rollup.L1UserTxs))
var null *common.BatchNum = nil var txID common.TxID
// Insert blocks into DB
for i := range blocks { if i == len(blocks)-1 { blocks[i].Block.Timestamp = time.Now() dbL1Txs, err := historyDB.GetAllL1UserTxs() assert.NoError(t, err) // Check batch_num is nil before forging
assert.Equal(t, null, dbL1Txs[len(dbL1Txs)-1].BatchNum) // Save this TxId
txID = dbL1Txs[len(dbL1Txs)-1].TxID } err = historyDB.AddBlockSCData(&blocks[i]) assert.NoError(t, err) }
// Check blocks
dbBlocks, err := historyDB.GetAllBlocks() assert.NoError(t, err) assert.Equal(t, len(blocks)+1, len(dbBlocks))
// Check batches
batches, err := historyDB.GetAllBatches() assert.NoError(t, err) assert.Equal(t, 11, len(batches))
// Check L1 Transactions
dbL1Txs, err := historyDB.GetAllL1UserTxs() assert.NoError(t, err) assert.Equal(t, 10, len(dbL1Txs))
// Tx Type
assert.Equal(t, common.TxTypeCreateAccountDeposit, dbL1Txs[0].Type) assert.Equal(t, common.TxTypeCreateAccountDeposit, dbL1Txs[1].Type) assert.Equal(t, common.TxTypeCreateAccountDepositTransfer, dbL1Txs[2].Type) assert.Equal(t, common.TxTypeDeposit, dbL1Txs[3].Type) assert.Equal(t, common.TxTypeDeposit, dbL1Txs[4].Type) assert.Equal(t, common.TxTypeDepositTransfer, dbL1Txs[5].Type) assert.Equal(t, common.TxTypeForceTransfer, dbL1Txs[6].Type) assert.Equal(t, common.TxTypeForceExit, dbL1Txs[7].Type) assert.Equal(t, common.TxTypeCreateAccountDeposit, dbL1Txs[8].Type) assert.Equal(t, common.TxTypeCreateAccountDeposit, dbL1Txs[9].Type)
// Tx ID
assert.Equal(t, "0x00e979da4b80d60a17ce56fa19278c6f3a7e1b43359fb8a8ea46d0264de7d653ab", dbL1Txs[0].TxID.String()) assert.Equal(t, "0x00af9bf96eb60f2d618519402a2f6b07057a034fa2baefd379fe8e1c969f1c5cf4", dbL1Txs[1].TxID.String()) assert.Equal(t, "0x00a256ee191905243320ea830840fd666a73c7b4e6f89ce4bd47ddf998dfee627a", dbL1Txs[2].TxID.String()) assert.Equal(t, "0x00930696d03ae0a1e6150b6ccb88043cb539a4e06a7f8baf213029ce9a0600197e", dbL1Txs[3].TxID.String()) assert.Equal(t, "0x00de8e41d49f23832f66364e8702c4b78237eb0c95542a94d34188e51696e74fc8", dbL1Txs[4].TxID.String()) assert.Equal(t, "0x007a44d6d60b15f3789d4ff49d62377a70255bf13a8d42e41ef49bf4c7b77d2c1b", dbL1Txs[5].TxID.String()) assert.Equal(t, "0x00c33f316240f8d33a973db2d0e901e4ac1c96de30b185fcc6b63dac4d0e147bd4", dbL1Txs[6].TxID.String()) assert.Equal(t, "0x00b55f0882c5229d1be3d9d3c1a076290f249cd0bae5ae6e609234606befb91233", dbL1Txs[7].TxID.String()) assert.Equal(t, "0x009133d4c8a412ca45f50bccdbcfdb8393b0dd8efe953d0cc3bcc82796b7a581b6", dbL1Txs[8].TxID.String()) assert.Equal(t, "0x00f5e8ab141ac16d673e654ba7747c2f12e93ea2c50ba6c05563752ca531968c62", dbL1Txs[9].TxID.String())
// Tx From IDx
assert.Equal(t, common.Idx(0), dbL1Txs[0].FromIdx) assert.Equal(t, common.Idx(0), dbL1Txs[1].FromIdx) assert.Equal(t, common.Idx(0), dbL1Txs[2].FromIdx) assert.NotEqual(t, common.Idx(0), dbL1Txs[3].FromIdx) assert.NotEqual(t, common.Idx(0), dbL1Txs[4].FromIdx) assert.NotEqual(t, common.Idx(0), dbL1Txs[5].FromIdx) assert.NotEqual(t, common.Idx(0), dbL1Txs[6].FromIdx) assert.NotEqual(t, common.Idx(0), dbL1Txs[7].FromIdx) assert.Equal(t, common.Idx(0), dbL1Txs[8].FromIdx) assert.Equal(t, common.Idx(0), dbL1Txs[9].FromIdx) assert.Equal(t, common.Idx(0), dbL1Txs[9].FromIdx) assert.Equal(t, dbL1Txs[5].FromIdx, dbL1Txs[6].FromIdx) assert.Equal(t, dbL1Txs[5].FromIdx, dbL1Txs[7].FromIdx)
// Tx to IDx
assert.Equal(t, dbL1Txs[2].ToIdx, dbL1Txs[5].FromIdx) assert.Equal(t, dbL1Txs[5].ToIdx, dbL1Txs[3].FromIdx) assert.Equal(t, dbL1Txs[6].ToIdx, dbL1Txs[3].FromIdx)
// Token ID
assert.Equal(t, common.TokenID(1), dbL1Txs[0].TokenID) assert.Equal(t, common.TokenID(1), dbL1Txs[1].TokenID) assert.Equal(t, common.TokenID(1), dbL1Txs[2].TokenID) assert.Equal(t, common.TokenID(1), dbL1Txs[3].TokenID) assert.Equal(t, common.TokenID(1), dbL1Txs[4].TokenID) assert.Equal(t, common.TokenID(1), dbL1Txs[5].TokenID) assert.Equal(t, common.TokenID(1), dbL1Txs[6].TokenID) assert.Equal(t, common.TokenID(1), dbL1Txs[7].TokenID) assert.Equal(t, common.TokenID(2), dbL1Txs[8].TokenID) assert.Equal(t, common.TokenID(2), dbL1Txs[9].TokenID)
// Batch Number
var bn common.BatchNum = common.BatchNum(2)
assert.Equal(t, &bn, dbL1Txs[0].BatchNum) assert.Equal(t, &bn, dbL1Txs[1].BatchNum)
bn = common.BatchNum(4) assert.Equal(t, &bn, dbL1Txs[2].BatchNum)
bn = common.BatchNum(7) assert.Equal(t, &bn, dbL1Txs[3].BatchNum) assert.Equal(t, &bn, dbL1Txs[4].BatchNum) assert.Equal(t, &bn, dbL1Txs[5].BatchNum)
bn = common.BatchNum(8) assert.Equal(t, &bn, dbL1Txs[6].BatchNum) assert.Equal(t, &bn, dbL1Txs[7].BatchNum)
bn = common.BatchNum(10) assert.Equal(t, &bn, dbL1Txs[8].BatchNum)
bn = common.BatchNum(11) assert.Equal(t, &bn, dbL1Txs[9].BatchNum)
// eth_block_num
assert.Equal(t, int64(2), dbL1Txs[0].EthBlockNum) assert.Equal(t, int64(2), dbL1Txs[1].EthBlockNum) assert.Equal(t, int64(3), dbL1Txs[2].EthBlockNum) assert.Equal(t, int64(4), dbL1Txs[3].EthBlockNum) assert.Equal(t, int64(4), dbL1Txs[4].EthBlockNum) assert.Equal(t, int64(5), dbL1Txs[5].EthBlockNum) assert.Equal(t, int64(6), dbL1Txs[6].EthBlockNum) assert.Equal(t, int64(6), dbL1Txs[7].EthBlockNum) assert.Equal(t, int64(7), dbL1Txs[8].EthBlockNum) assert.Equal(t, int64(8), dbL1Txs[9].EthBlockNum)
// User Origin
assert.Equal(t, true, dbL1Txs[0].UserOrigin) assert.Equal(t, true, dbL1Txs[1].UserOrigin) assert.Equal(t, true, dbL1Txs[2].UserOrigin) assert.Equal(t, true, dbL1Txs[3].UserOrigin) assert.Equal(t, true, dbL1Txs[4].UserOrigin) assert.Equal(t, true, dbL1Txs[5].UserOrigin) assert.Equal(t, true, dbL1Txs[6].UserOrigin) assert.Equal(t, true, dbL1Txs[7].UserOrigin) assert.Equal(t, true, dbL1Txs[8].UserOrigin) assert.Equal(t, true, dbL1Txs[9].UserOrigin)
// Deposit Amount
assert.Equal(t, big.NewInt(10), dbL1Txs[0].DepositAmount) assert.Equal(t, big.NewInt(10), dbL1Txs[1].DepositAmount) assert.Equal(t, big.NewInt(20), dbL1Txs[2].DepositAmount) assert.Equal(t, big.NewInt(10), dbL1Txs[3].DepositAmount) assert.Equal(t, big.NewInt(10), dbL1Txs[4].DepositAmount) assert.Equal(t, big.NewInt(10), dbL1Txs[5].DepositAmount) assert.Equal(t, big.NewInt(0), dbL1Txs[6].DepositAmount) assert.Equal(t, big.NewInt(0), dbL1Txs[7].DepositAmount) assert.Equal(t, big.NewInt(10), dbL1Txs[8].DepositAmount) assert.Equal(t, big.NewInt(10), dbL1Txs[9].DepositAmount)
// Check saved txID's batch_num is not nil
assert.Equal(t, txID, dbL1Txs[len(dbL1Txs)-2].TxID) assert.NotEqual(t, null, dbL1Txs[len(dbL1Txs)-2].BatchNum)
// Check Coordinator TXs
coordTxs, err := historyDB.GetAllL1CoordinatorTxs() assert.NoError(t, err) assert.Equal(t, 1, len(coordTxs)) assert.Equal(t, common.TxTypeCreateAccountDeposit, coordTxs[0].Type) assert.Equal(t, false, coordTxs[0].UserOrigin)
// Check L2 TXs
dbL2Txs, err := historyDB.GetAllL2Txs() assert.NoError(t, err) assert.Equal(t, 4, len(dbL2Txs))
// Tx Type
assert.Equal(t, common.TxTypeTransfer, dbL2Txs[0].Type) assert.Equal(t, common.TxTypeTransfer, dbL2Txs[1].Type) assert.Equal(t, common.TxTypeTransfer, dbL2Txs[2].Type) assert.Equal(t, common.TxTypeExit, dbL2Txs[3].Type)
// Tx ID
assert.Equal(t, "0x024e555248100b69a8aabf6d31719b9fe8a60dcc6c3407904a93c8d2d9ade18ee5", dbL2Txs[0].TxID.String()) assert.Equal(t, "0x021ae87ca34d50ff35d98dfc0d7c95f2bf2e4ffeebb82ea71f43a8b0dfa5d36d89", dbL2Txs[1].TxID.String()) assert.Equal(t, "0x024abce7f3f2382dc520ed557593f11dea1ee197e55b60402e664facc27aa19774", dbL2Txs[2].TxID.String()) assert.Equal(t, "0x02f921ad9e7a6e59606570fe12a7dde0e36014197de0363b9b45e5097d6f2b1dd0", dbL2Txs[3].TxID.String())
// Tx From and To IDx
assert.Equal(t, dbL2Txs[0].ToIdx, dbL2Txs[2].FromIdx) assert.Equal(t, dbL2Txs[1].ToIdx, dbL2Txs[0].FromIdx) assert.Equal(t, dbL2Txs[2].ToIdx, dbL2Txs[1].FromIdx)
// Batch Number
assert.Equal(t, common.BatchNum(5), dbL2Txs[0].BatchNum) assert.Equal(t, common.BatchNum(5), dbL2Txs[1].BatchNum) assert.Equal(t, common.BatchNum(5), dbL2Txs[2].BatchNum) assert.Equal(t, common.BatchNum(5), dbL2Txs[3].BatchNum)
// eth_block_num
assert.Equal(t, int64(4), dbL2Txs[0].EthBlockNum) assert.Equal(t, int64(4), dbL2Txs[1].EthBlockNum) assert.Equal(t, int64(4), dbL2Txs[2].EthBlockNum)
// Amount
assert.Equal(t, big.NewInt(10), dbL2Txs[0].Amount) assert.Equal(t, big.NewInt(10), dbL2Txs[1].Amount) assert.Equal(t, big.NewInt(10), dbL2Txs[2].Amount) assert.Equal(t, big.NewInt(10), dbL2Txs[3].Amount) }
func TestExitTree(t *testing.T) { nBatches := 17 blocks := setTestBlocks(1, 10) batches := test.GenBatches(nBatches, blocks) err := historyDB.AddBatches(batches) assert.NoError(t, err) const nTokens = 50 tokens, ethToken := test.GenTokens(nTokens, blocks) err = historyDB.AddTokens(tokens) assert.NoError(t, err) tokens = append([]common.Token{ethToken}, tokens...) const nAccounts = 3 accs := test.GenAccounts(nAccounts, 0, tokens, nil, nil, batches) assert.NoError(t, historyDB.AddAccounts(accs)) exitTree := test.GenExitTree(nBatches, batches, accs, blocks) err = historyDB.AddExitTree(exitTree) assert.NoError(t, err) }
func TestGetUnforgedL1UserTxs(t *testing.T) { test.WipeDB(historyDB.DB())
set := ` Type: Blockchain AddToken(1) AddToken(2) AddToken(3)
CreateAccountDeposit(1) A: 20 CreateAccountDeposit(2) A: 20 CreateAccountDeposit(1) B: 5 CreateAccountDeposit(1) C: 5 CreateAccountDeposit(1) D: 5
> block ` tc := til.NewContext(uint16(0), 128) blocks, err := tc.GenerateBlocks(set) require.NoError(t, err) // Sanity check
require.Equal(t, 1, len(blocks)) require.Equal(t, 5, len(blocks[0].Rollup.L1UserTxs))
toForgeL1TxsNum := int64(1)
for i := range blocks { err = historyDB.AddBlockSCData(&blocks[i]) require.NoError(t, err) }
l1UserTxs, err := historyDB.GetUnforgedL1UserTxs(toForgeL1TxsNum) require.NoError(t, err) assert.Equal(t, 5, len(l1UserTxs)) assert.Equal(t, blocks[0].Rollup.L1UserTxs, l1UserTxs)
// No l1UserTxs for this toForgeL1TxsNum
l1UserTxs, err = historyDB.GetUnforgedL1UserTxs(2) require.NoError(t, err) assert.Equal(t, 0, len(l1UserTxs)) }
func exampleInitSCVars() (*common.RollupVariables, *common.AuctionVariables, *common.WDelayerVariables) { //nolint:govet
rollup := &common.RollupVariables{ 0, big.NewInt(10), 12, 13, [5]common.BucketParams{}, false, } //nolint:govet
auction := &common.AuctionVariables{ 0, ethCommon.BigToAddress(big.NewInt(2)), ethCommon.BigToAddress(big.NewInt(3)), "https://boot.coord.com", [6]*big.Int{ big.NewInt(1), big.NewInt(2), big.NewInt(3), big.NewInt(4), big.NewInt(5), big.NewInt(6), }, 0, 2, 4320, [3]uint16{10, 11, 12}, 1000, 20, } //nolint:govet
wDelayer := &common.WDelayerVariables{ 0, ethCommon.BigToAddress(big.NewInt(2)), ethCommon.BigToAddress(big.NewInt(3)), 13, 14, false, } return rollup, auction, wDelayer }
func TestSetInitialSCVars(t *testing.T) { test.WipeDB(historyDB.DB()) _, _, _, err := historyDB.GetSCVars() assert.Equal(t, sql.ErrNoRows, tracerr.Unwrap(err)) rollup, auction, wDelayer := exampleInitSCVars() err = historyDB.SetInitialSCVars(rollup, auction, wDelayer) require.NoError(t, err) dbRollup, dbAuction, dbWDelayer, err := historyDB.GetSCVars() require.NoError(t, err) require.Equal(t, rollup, dbRollup) require.Equal(t, auction, dbAuction) require.Equal(t, wDelayer, dbWDelayer) }
func TestSetExtraInfoForgedL1UserTxs(t *testing.T) { test.WipeDB(historyDB.DB())
set := ` Type: Blockchain
AddToken(1)
CreateAccountDeposit(1) A: 2000 CreateAccountDeposit(1) B: 500 CreateAccountDeposit(1) C: 500
> batchL1 // forge L1UserTxs{nil}, freeze defined L1UserTxs{*}
> block // blockNum=2
> batchL1 // forge defined L1UserTxs{*}
> block // blockNum=3
`
tc := til.NewContext(uint16(0), common.RollupConstMaxL1UserTx) tilCfgExtra := til.ConfigExtra{ BootCoordAddr: ethCommon.HexToAddress("0xE39fEc6224708f0772D2A74fd3f9055A90E0A9f2"), CoordUser: "A", } blocks, err := tc.GenerateBlocks(set) require.NoError(t, err) err = tc.FillBlocksExtra(blocks, &tilCfgExtra) require.NoError(t, err) err = tc.FillBlocksForgedL1UserTxs(blocks) require.NoError(t, err)
// Add only first block so that the L1UserTxs are not marked as forged
for i := range blocks[:1] { err = historyDB.AddBlockSCData(&blocks[i]) require.NoError(t, err) } // Add second batch to trigger the update of the batch_num,
// while avoiding the implicit call of setExtraInfoForgedL1UserTxs
err = historyDB.addBlock(historyDB.dbWrite, &blocks[1].Block) require.NoError(t, err) err = historyDB.addBatch(historyDB.dbWrite, &blocks[1].Rollup.Batches[0].Batch) require.NoError(t, err) err = historyDB.addAccounts(historyDB.dbWrite, blocks[1].Rollup.Batches[0].CreatedAccounts) require.NoError(t, err)
// Set the Effective{Amount,DepositAmount} of the L1UserTxs that are forged in the second block
l1Txs := blocks[1].Rollup.Batches[0].L1UserTxs require.Equal(t, 3, len(l1Txs)) // Change some values to test all cases
l1Txs[1].EffectiveAmount = big.NewInt(0) l1Txs[2].EffectiveDepositAmount = big.NewInt(0) l1Txs[2].EffectiveAmount = big.NewInt(0) err = historyDB.setExtraInfoForgedL1UserTxs(historyDB.dbWrite, l1Txs) require.NoError(t, err)
dbL1Txs, err := historyDB.GetAllL1UserTxs() require.NoError(t, err) for i, tx := range dbL1Txs { log.Infof("%d %v %v", i, tx.EffectiveAmount, tx.EffectiveDepositAmount) assert.NotNil(t, tx.EffectiveAmount) assert.NotNil(t, tx.EffectiveDepositAmount) switch tx.TxID { case l1Txs[0].TxID: assert.Equal(t, l1Txs[0].DepositAmount, tx.EffectiveDepositAmount) assert.Equal(t, l1Txs[0].Amount, tx.EffectiveAmount) case l1Txs[1].TxID: assert.Equal(t, l1Txs[1].DepositAmount, tx.EffectiveDepositAmount) assert.Equal(t, big.NewInt(0), tx.EffectiveAmount) case l1Txs[2].TxID: assert.Equal(t, big.NewInt(0), tx.EffectiveDepositAmount) assert.Equal(t, big.NewInt(0), tx.EffectiveAmount) } } }
func TestUpdateExitTree(t *testing.T) { test.WipeDB(historyDB.DB())
set := ` Type: Blockchain
AddToken(1)
CreateAccountDeposit(1) C: 2000 // Idx=256+2=258
CreateAccountDeposit(1) D: 500 // Idx=256+3=259
CreateAccountCoordinator(1) A // Idx=256+0=256
CreateAccountCoordinator(1) B // Idx=256+1=257
> batchL1 // forge L1UserTxs{nil}, freeze defined L1UserTxs{5}
> batchL1 // forge defined L1UserTxs{5}, freeze L1UserTxs{nil}
> block // blockNum=2
ForceExit(1) A: 100 ForceExit(1) B: 80
Exit(1) C: 50 (172) Exit(1) D: 30 (172)
> batchL1 // forge L1UserTxs{nil}, freeze defined L1UserTxs{3}
> batchL1 // forge L1UserTxs{3}, freeze defined L1UserTxs{nil}
> block // blockNum=3
> block // blockNum=4 (empty block)
> block // blockNum=5 (empty block)
`
tc := til.NewContext(uint16(0), common.RollupConstMaxL1UserTx) tilCfgExtra := til.ConfigExtra{ BootCoordAddr: ethCommon.HexToAddress("0xE39fEc6224708f0772D2A74fd3f9055A90E0A9f2"), CoordUser: "A", } blocks, err := tc.GenerateBlocks(set) require.NoError(t, err) err = tc.FillBlocksExtra(blocks, &tilCfgExtra) require.NoError(t, err)
// Add all blocks except for the last two
for i := range blocks[:len(blocks)-2] { err = historyDB.AddBlockSCData(&blocks[i]) require.NoError(t, err) }
// Add withdraws to the second-to-last block, and insert block into the DB
block := &blocks[len(blocks)-2] require.Equal(t, int64(4), block.Block.Num) tokenAddr := blocks[0].Rollup.AddedTokens[0].EthAddr // block.WDelayer.Deposits = append(block.WDelayer.Deposits,
// common.WDelayerTransfer{Owner: tc.UsersByIdx[257].Addr, Token: tokenAddr, Amount: big.NewInt(80)}, // 257
// common.WDelayerTransfer{Owner: tc.UsersByIdx[259].Addr, Token: tokenAddr, Amount: big.NewInt(15)}, // 259
// )
block.Rollup.Withdrawals = append(block.Rollup.Withdrawals, common.WithdrawInfo{Idx: 256, NumExitRoot: 4, InstantWithdraw: true}, common.WithdrawInfo{Idx: 257, NumExitRoot: 4, InstantWithdraw: false, Owner: tc.UsersByIdx[257].Addr, Token: tokenAddr}, common.WithdrawInfo{Idx: 258, NumExitRoot: 3, InstantWithdraw: true}, common.WithdrawInfo{Idx: 259, NumExitRoot: 3, InstantWithdraw: false, Owner: tc.UsersByIdx[259].Addr, Token: tokenAddr}, ) err = historyDB.addBlock(historyDB.dbWrite, &block.Block) require.NoError(t, err)
err = historyDB.updateExitTree(historyDB.dbWrite, block.Block.Num, block.Rollup.Withdrawals, block.WDelayer.Withdrawals) require.NoError(t, err)
// Check that exits in DB match with the expected values
dbExits, err := historyDB.GetAllExits() require.NoError(t, err) assert.Equal(t, 4, len(dbExits)) dbExitsByIdx := make(map[common.Idx]common.ExitInfo) for _, dbExit := range dbExits { dbExitsByIdx[dbExit.AccountIdx] = dbExit } for _, withdraw := range block.Rollup.Withdrawals { assert.Equal(t, withdraw.NumExitRoot, dbExitsByIdx[withdraw.Idx].BatchNum) if withdraw.InstantWithdraw { assert.Equal(t, &block.Block.Num, dbExitsByIdx[withdraw.Idx].InstantWithdrawn) } else { assert.Equal(t, &block.Block.Num, dbExitsByIdx[withdraw.Idx].DelayedWithdrawRequest) } }
// Add delayed withdraw to the last block, and insert block into the DB
block = &blocks[len(blocks)-1] require.Equal(t, int64(5), block.Block.Num) block.WDelayer.Withdrawals = append(block.WDelayer.Withdrawals, common.WDelayerTransfer{ Owner: tc.UsersByIdx[257].Addr, Token: tokenAddr, Amount: big.NewInt(80), }) err = historyDB.addBlock(historyDB.dbWrite, &block.Block) require.NoError(t, err)
err = historyDB.updateExitTree(historyDB.dbWrite, block.Block.Num, block.Rollup.Withdrawals, block.WDelayer.Withdrawals) require.NoError(t, err)
// Check that delayed withdrawn has been set
dbExits, err = historyDB.GetAllExits() require.NoError(t, err) for _, dbExit := range dbExits { dbExitsByIdx[dbExit.AccountIdx] = dbExit } require.Equal(t, &block.Block.Num, dbExitsByIdx[257].DelayedWithdrawn) }
func TestGetBestBidCoordinator(t *testing.T) { test.WipeDB(historyDB.DB())
rollup, auction, wDelayer := exampleInitSCVars() err := historyDB.SetInitialSCVars(rollup, auction, wDelayer) require.NoError(t, err)
tc := til.NewContext(uint16(0), common.RollupConstMaxL1UserTx) blocks, err := tc.GenerateBlocks(` Type: Blockchain > block // blockNum=2
`) require.NoError(t, err) err = historyDB.AddBlockSCData(&blocks[0]) require.NoError(t, err)
coords := []common.Coordinator{ { Bidder: ethCommon.BigToAddress(big.NewInt(1)), Forger: ethCommon.BigToAddress(big.NewInt(2)), EthBlockNum: 2, URL: "foo", }, { Bidder: ethCommon.BigToAddress(big.NewInt(3)), Forger: ethCommon.BigToAddress(big.NewInt(4)), EthBlockNum: 2, URL: "bar", }, } err = historyDB.addCoordinators(historyDB.dbWrite, coords) require.NoError(t, err)
bids := []common.Bid{ { SlotNum: 10, BidValue: big.NewInt(10), EthBlockNum: 2, Bidder: coords[0].Bidder, }, { SlotNum: 10, BidValue: big.NewInt(20), EthBlockNum: 2, Bidder: coords[1].Bidder, }, }
err = historyDB.addBids(historyDB.dbWrite, bids) require.NoError(t, err)
forger10, err := historyDB.GetBestBidCoordinator(10) require.NoError(t, err) require.Equal(t, coords[1].Forger, forger10.Forger) require.Equal(t, coords[1].Bidder, forger10.Bidder) require.Equal(t, coords[1].URL, forger10.URL) require.Equal(t, bids[1].SlotNum, forger10.SlotNum) require.Equal(t, bids[1].BidValue, forger10.BidValue) for i := range forger10.DefaultSlotSetBid { require.Equal(t, auction.DefaultSlotSetBid[i], forger10.DefaultSlotSetBid[i]) }
_, err = historyDB.GetBestBidCoordinator(11) require.Equal(t, sql.ErrNoRows, tracerr.Unwrap(err)) }
func TestAddBucketUpdates(t *testing.T) { test.WipeDB(historyDB.DB()) const fromBlock int64 = 1 const toBlock int64 = 5 + 1 setTestBlocks(fromBlock, toBlock)
bucketUpdates := []common.BucketUpdate{ { EthBlockNum: 4, NumBucket: 0, BlockStamp: 4, Withdrawals: big.NewInt(123), }, { EthBlockNum: 5, NumBucket: 2, BlockStamp: 5, Withdrawals: big.NewInt(42), }, } err := historyDB.addBucketUpdates(historyDB.dbWrite, bucketUpdates) require.NoError(t, err) dbBucketUpdates, err := historyDB.GetAllBucketUpdates() require.NoError(t, err) assert.Equal(t, bucketUpdates, dbBucketUpdates) }
func TestAddTokenExchanges(t *testing.T) { test.WipeDB(historyDB.DB()) const fromBlock int64 = 1 const toBlock int64 = 5 + 1 setTestBlocks(fromBlock, toBlock)
tokenExchanges := []common.TokenExchange{ { EthBlockNum: 4, Address: ethCommon.BigToAddress(big.NewInt(111)), ValueUSD: 12345, }, { EthBlockNum: 5, Address: ethCommon.BigToAddress(big.NewInt(222)), ValueUSD: 67890, }, } err := historyDB.addTokenExchanges(historyDB.dbWrite, tokenExchanges) require.NoError(t, err) dbTokenExchanges, err := historyDB.GetAllTokenExchanges() require.NoError(t, err) assert.Equal(t, tokenExchanges, dbTokenExchanges) }
func TestAddEscapeHatchWithdrawals(t *testing.T) { test.WipeDB(historyDB.DB()) const fromBlock int64 = 1 const toBlock int64 = 5 + 1 setTestBlocks(fromBlock, toBlock)
escapeHatchWithdrawals := []common.WDelayerEscapeHatchWithdrawal{ { EthBlockNum: 4, Who: ethCommon.BigToAddress(big.NewInt(111)), To: ethCommon.BigToAddress(big.NewInt(222)), TokenAddr: ethCommon.BigToAddress(big.NewInt(333)), Amount: big.NewInt(10002), }, { EthBlockNum: 5, Who: ethCommon.BigToAddress(big.NewInt(444)), To: ethCommon.BigToAddress(big.NewInt(555)), TokenAddr: ethCommon.BigToAddress(big.NewInt(666)), Amount: big.NewInt(20003), }, } err := historyDB.addEscapeHatchWithdrawals(historyDB.dbWrite, escapeHatchWithdrawals) require.NoError(t, err) dbEscapeHatchWithdrawals, err := historyDB.GetAllEscapeHatchWithdrawals() require.NoError(t, err) assert.Equal(t, escapeHatchWithdrawals, dbEscapeHatchWithdrawals) }
// func TestGetMetricsAPI(t *testing.T) {
// test.WipeDB(historyDB.DB())
// set := `
// Type: Blockchain
//
// AddToken(1)
//
// CreateAccountDeposit(1) A: 1000 // numTx=1
// CreateAccountDeposit(1) B: 2000 // numTx=2
// CreateAccountDeposit(1) C: 3000 //numTx=3
//
// // block 0 is stored as default in the DB
// // block 1 does not exist
// > batchL1 // numBatches=1
// > batchL1 // numBatches=2
// > block // blockNum=2
//
// Transfer(1) C-A : 10 (1) // numTx=4
// > batch // numBatches=3
// > block // blockNum=3
// Transfer(1) B-C : 10 (1) // numTx=5
// > batch // numBatches=5
// > block // blockNum=4
// Transfer(1) A-B : 10 (1) // numTx=6
// > batch // numBatches=5
// > block // blockNum=5
// Transfer(1) A-B : 10 (1) // numTx=7
// > batch // numBatches=6
// > block // blockNum=6
// `
//
// const numBatches int = 6
// const numTx int = 7
// const blockNum = 6 - 1
//
// tc := til.NewContext(uint16(0), common.RollupConstMaxL1UserTx)
// tilCfgExtra := til.ConfigExtra{
// BootCoordAddr: ethCommon.HexToAddress("0xE39fEc6224708f0772D2A74fd3f9055A90E0A9f2"),
// CoordUser: "A",
// }
// blocks, err := tc.GenerateBlocks(set)
// require.NoError(t, err)
// err = tc.FillBlocksExtra(blocks, &tilCfgExtra)
// require.NoError(t, err)
//
// // Sanity check
// require.Equal(t, blockNum, len(blocks))
//
// // Adding one batch per block
// // batch frequency can be chosen
// const frequency int = 15
//
// for i := range blocks {
// blocks[i].Block.Timestamp = time.Now().Add(-time.Second * time.Duration(frequency*(len(blocks)-i)))
// err = historyDB.AddBlockSCData(&blocks[i])
// assert.NoError(t, err)
// }
//
// res, err := historyDBWithACC.GetMetricsAPI(common.BatchNum(numBatches))
// assert.NoError(t, err)
//
// assert.Equal(t, float64(numTx)/float64(numBatches), res.TransactionsPerBatch)
//
// // Frequency is not exactly the desired one, some decimals may appear
// // There is a -2 as time for first and last batch is not taken into account
// assert.InEpsilon(t, float64(frequency)*float64(numBatches-2)/float64(numBatches), res.BatchFrequency, 0.01)
// assert.InEpsilon(t, float64(numTx)/float64(frequency*blockNum-frequency), res.TransactionsPerSecond, 0.01)
// assert.Equal(t, int64(3), res.TotalAccounts)
// assert.Equal(t, int64(3), res.TotalBJJs)
// // Til does not set fees
// assert.Equal(t, float64(0), res.AvgTransactionFee)
// }
//
// func TestGetMetricsAPIMoreThan24Hours(t *testing.T) {
// test.WipeDB(historyDB.DB())
//
// testUsersLen := 3
// var set []til.Instruction
// for user := 0; user < testUsersLen; user++ {
// set = append(set, til.Instruction{
// Typ: common.TxTypeCreateAccountDeposit,
// TokenID: common.TokenID(0),
// DepositAmount: big.NewInt(1000000),
// Amount: big.NewInt(0),
// From: fmt.Sprintf("User%02d", user),
// })
// set = append(set, til.Instruction{Typ: til.TypeNewBlock})
// }
// set = append(set, til.Instruction{Typ: til.TypeNewBatchL1})
// set = append(set, til.Instruction{Typ: til.TypeNewBatchL1})
// set = append(set, til.Instruction{Typ: til.TypeNewBlock})
//
// // Transfers
// const numBlocks int = 30
// for x := 0; x < numBlocks; x++ {
// set = append(set, til.Instruction{
// Typ: common.TxTypeTransfer,
// TokenID: common.TokenID(0),
// DepositAmount: big.NewInt(1),
// Amount: big.NewInt(0),
// From: "User00",
// To: "User01",
// })
// set = append(set, til.Instruction{Typ: til.TypeNewBatch})
// set = append(set, til.Instruction{Typ: til.TypeNewBlock})
// }
//
// var chainID uint16 = 0
// tc := til.NewContext(chainID, common.RollupConstMaxL1UserTx)
// blocks, err := tc.GenerateBlocksFromInstructions(set)
// assert.NoError(t, err)
//
// tilCfgExtra := til.ConfigExtra{
// CoordUser: "A",
// }
// err = tc.FillBlocksExtra(blocks, &tilCfgExtra)
// require.NoError(t, err)
//
// const numBatches int = 2 + numBlocks
// const blockNum = 4 + numBlocks
//
// // Sanity check
// require.Equal(t, blockNum, len(blocks))
//
// // Adding one batch per block
// // batch frequency can be chosen
// const blockTime time.Duration = 3600 * time.Second
// now := time.Now()
// require.NoError(t, err)
//
// for i := range blocks {
// blocks[i].Block.Timestamp = now.Add(-time.Duration(len(blocks)-1-i) * blockTime)
// err = historyDB.AddBlockSCData(&blocks[i])
// assert.NoError(t, err)
// }
//
// res, err := historyDBWithACC.GetMetricsAPI(common.BatchNum(numBatches))
// assert.NoError(t, err)
//
// assert.InEpsilon(t, 1.0, res.TransactionsPerBatch, 0.1)
//
// assert.InEpsilon(t, res.BatchFrequency, float64(blockTime/time.Second), 0.1)
// assert.InEpsilon(t, 1.0/float64(blockTime/time.Second), res.TransactionsPerSecond, 0.1)
// assert.Equal(t, int64(3), res.TotalAccounts)
// assert.Equal(t, int64(3), res.TotalBJJs)
// // Til does not set fees
// assert.Equal(t, float64(0), res.AvgTransactionFee)
// }
//
// func TestGetMetricsAPIEmpty(t *testing.T) {
// test.WipeDB(historyDB.DB())
// _, err := historyDBWithACC.GetMetricsAPI(0)
// assert.NoError(t, err)
// }
//
// func TestGetAvgTxFeeEmpty(t *testing.T) {
// test.WipeDB(historyDB.DB())
// _, err := historyDBWithACC.GetAvgTxFeeAPI()
// assert.NoError(t, err)
// }
func TestGetLastL1TxsNum(t *testing.T) { test.WipeDB(historyDB.DB()) _, err := historyDB.GetLastL1TxsNum() assert.NoError(t, err) }
func TestGetLastTxsPosition(t *testing.T) { test.WipeDB(historyDB.DB()) _, err := historyDB.GetLastTxsPosition(0) assert.Equal(t, sql.ErrNoRows.Error(), err.Error()) }
func TestGetFirstBatchBlockNumBySlot(t *testing.T) { test.WipeDB(historyDB.DB())
set := ` Type: Blockchain
// Slot = 0
> block // 2
> block // 3
> block // 4
> block // 5
// Slot = 1
> block // 6
> block // 7
> batch > block // 8
> block // 9
// Slot = 2
> batch > block // 10
> block // 11
> block // 12
> block // 13
` tc := til.NewContext(uint16(0), common.RollupConstMaxL1UserTx) blocks, err := tc.GenerateBlocks(set) assert.NoError(t, err)
tilCfgExtra := til.ConfigExtra{ CoordUser: "A", } err = tc.FillBlocksExtra(blocks, &tilCfgExtra) require.NoError(t, err)
for i := range blocks { for j := range blocks[i].Rollup.Batches { blocks[i].Rollup.Batches[j].Batch.SlotNum = int64(i) / 4 } }
// Add all blocks
for i := range blocks { err = historyDB.AddBlockSCData(&blocks[i]) require.NoError(t, err) }
_, err = historyDB.GetFirstBatchBlockNumBySlot(0) require.Equal(t, sql.ErrNoRows, tracerr.Unwrap(err))
bn1, err := historyDB.GetFirstBatchBlockNumBySlot(1) require.NoError(t, err) assert.Equal(t, int64(8), bn1)
bn2, err := historyDB.GetFirstBatchBlockNumBySlot(2) require.NoError(t, err) assert.Equal(t, int64(10), bn2) }
func TestTxItemID(t *testing.T) { test.WipeDB(historyDB.DB()) testUsersLen := 10 var set []til.Instruction for user := 0; user < testUsersLen; user++ { set = append(set, til.Instruction{ Typ: common.TxTypeCreateAccountDeposit, TokenID: common.TokenID(0), DepositAmount: big.NewInt(1000000), Amount: big.NewInt(0), From: fmt.Sprintf("User%02d", user), }) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) } set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) for user := 0; user < testUsersLen; user++ { set = append(set, til.Instruction{ Typ: common.TxTypeDeposit, TokenID: common.TokenID(0), DepositAmount: big.NewInt(100000), Amount: big.NewInt(0), From: fmt.Sprintf("User%02d", user), }) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) } set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) for user := 0; user < testUsersLen; user++ { set = append(set, til.Instruction{ Typ: common.TxTypeDepositTransfer, TokenID: common.TokenID(0), DepositAmount: big.NewInt(10000 * int64(user+1)), Amount: big.NewInt(1000 * int64(user+1)), From: fmt.Sprintf("User%02d", user), To: fmt.Sprintf("User%02d", (user+1)%testUsersLen), }) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) } set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) for user := 0; user < testUsersLen; user++ { set = append(set, til.Instruction{ Typ: common.TxTypeForceTransfer, TokenID: common.TokenID(0), Amount: big.NewInt(100 * int64(user+1)), DepositAmount: big.NewInt(0), From: fmt.Sprintf("User%02d", user), To: fmt.Sprintf("User%02d", (user+1)%testUsersLen), }) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) } set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) for user := 0; user < testUsersLen; user++ { set = append(set, til.Instruction{ Typ: common.TxTypeForceExit, TokenID: common.TokenID(0), Amount: big.NewInt(10 * int64(user+1)), DepositAmount: big.NewInt(0), From: fmt.Sprintf("User%02d", user), }) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) } set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBatchL1}) set = append(set, til.Instruction{Typ: til.TypeNewBlock}) var chainID uint16 = 0 tc := til.NewContext(chainID, common.RollupConstMaxL1UserTx) blocks, err := tc.GenerateBlocksFromInstructions(set) assert.NoError(t, err)
tilCfgExtra := til.ConfigExtra{ CoordUser: "A", } err = tc.FillBlocksExtra(blocks, &tilCfgExtra) require.NoError(t, err)
// Add all blocks
for i := range blocks { err = historyDB.AddBlockSCData(&blocks[i]) require.NoError(t, err) }
txs, err := historyDB.GetAllL1UserTxs() require.NoError(t, err) position := 0 for _, tx := range txs { if tx.Position == 0 { position = 0 } assert.Equal(t, position, tx.Position) position++ } }
// setTestBlocks WARNING: this will delete the blocks and recreate them
func setTestBlocks(from, to int64) []common.Block { test.WipeDB(historyDB.DB()) blocks := test.GenBlocks(from, to) if err := historyDB.AddBlocks(blocks); err != nil { panic(err) } return blocks }
func TestNodeInfo(t *testing.T) { test.WipeDB(historyDB.DB())
err := historyDB.SetAPIState(&APIState{}) require.NoError(t, err)
clientSetup := test.NewClientSetupExample() constants := &Constants{ RollupConstants: *clientSetup.RollupConstants, AuctionConstants: *clientSetup.AuctionConstants, WDelayerConstants: *clientSetup.WDelayerConstants, ChainID: 42, HermezAddress: clientSetup.AuctionConstants.HermezRollup, } err = historyDB.SetConstants(constants) require.NoError(t, err)
// Test parameters
apiState := &APIState{ NodePublicConfig: NodePublicConfig{ ForgeDelay: 3.1, }, Network: Network{ LastEthBlock: 12, LastSyncBlock: 34, }, Metrics: Metrics{ TransactionsPerBatch: 1.1, TotalAccounts: 42, }, Rollup: *NewRollupVariablesAPI(clientSetup.RollupVariables), Auction: *NewAuctionVariablesAPI(clientSetup.AuctionVariables), WithdrawalDelayer: *clientSetup.WDelayerVariables, RecommendedFee: common.RecommendedFee{ ExistingAccount: 0.15, }, } err = historyDB.SetAPIState(apiState) require.NoError(t, err)
nodeConfig := &NodeConfig{ MaxPoolTxs: 123, MinFeeUSD: 0.5, } err = historyDB.SetNodeConfig(nodeConfig) require.NoError(t, err)
dbConstants, err := historyDB.GetConstants() require.NoError(t, err) assert.Equal(t, constants, dbConstants)
dbNodeConfig, err := historyDB.GetNodeConfig() require.NoError(t, err) assert.Equal(t, nodeConfig, dbNodeConfig)
dbAPIState, err := historyDB.GetAPIState() require.NoError(t, err) assert.Equal(t, apiState, dbAPIState) }
|