Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Update coordinator to work better under real net
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
3 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Redo coordinator structure, connect API to node
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago Update coordinator, call all api update functions
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
4 years ago |
|
package coordinator
import ( "context" "fmt" "math/big" "os" "sync" "time"
ethCommon "github.com/ethereum/go-ethereum/common" "github.com/hermeznetwork/hermez-node/batchbuilder" "github.com/hermeznetwork/hermez-node/common" "github.com/hermeznetwork/hermez-node/db/historydb" "github.com/hermeznetwork/hermez-node/db/l2db" "github.com/hermeznetwork/hermez-node/eth" "github.com/hermeznetwork/hermez-node/log" "github.com/hermeznetwork/hermez-node/prover" "github.com/hermeznetwork/hermez-node/synchronizer" "github.com/hermeznetwork/hermez-node/txprocessor" "github.com/hermeznetwork/hermez-node/txselector" "github.com/hermeznetwork/tracerr" )
var ( errLastL1BatchNotSynced = fmt.Errorf("last L1Batch not synced yet") errForgeNoTxsBeforeDelay = fmt.Errorf("no txs to forge and we haven't reached the forge no txs delay") errForgeBeforeDelay = fmt.Errorf("we haven't reached the forge delay") )
const ( queueLen = 16 longWaitDuration = 999 * time.Hour zeroDuration = 0 * time.Second )
// Config contains the Coordinator configuration
type Config struct { // ForgerAddress is the address under which this coordinator is forging
ForgerAddress ethCommon.Address // ConfirmBlocks is the number of confirmation blocks to wait for sent
// ethereum transactions before forgetting about them
ConfirmBlocks int64 // L1BatchTimeoutPerc is the portion of the range before the L1Batch
// timeout that will trigger a schedule to forge an L1Batch
L1BatchTimeoutPerc float64 // StartSlotBlocksDelay is the number of blocks of delay to wait before
// starting the pipeline when we reach a slot in which we can forge.
StartSlotBlocksDelay int64 // ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which
// the forger address is checked to be allowed to forge (apart from
// checking the next block), used to decide when to stop scheduling new
// batches (by stopping the pipeline).
// For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck
// is 5, eventhough at block 11 we canForge, the pipeline will be
// stopped if we can't forge at block 15.
// This value should be the expected number of blocks it takes between
// scheduling a batch and having it mined.
ScheduleBatchBlocksAheadCheck int64 // SendBatchBlocksMarginCheck is the number of margin blocks ahead in
// which the coordinator is also checked to be allowed to forge, apart
// from the next block; used to decide when to stop sending batches to
// the smart contract.
// For example, if we are at block 10 and SendBatchBlocksMarginCheck is
// 5, eventhough at block 11 we canForge, the batch will be discarded
// if we can't forge at block 15.
// This value should be the expected number of blocks it takes between
// sending a batch and having it mined.
SendBatchBlocksMarginCheck int64 // EthClientAttempts is the number of attempts to do an eth client RPC
// call before giving up
EthClientAttempts int // ForgeRetryInterval is the waiting interval between calls forge a
// batch after an error
ForgeRetryInterval time.Duration // ForgeDelay is the delay after which a batch is forged if the slot is
// already committed. If set to 0s, the coordinator will continuously
// forge at the maximum rate.
ForgeDelay time.Duration // ForgeNoTxsDelay is the delay after which a batch is forged even if
// there are no txs to forge if the slot is already committed. If set
// to 0s, the coordinator will continuously forge even if the batches
// are empty.
ForgeNoTxsDelay time.Duration // SyncRetryInterval is the waiting interval between calls to the main
// handler of a synced block after an error
SyncRetryInterval time.Duration // EthClientAttemptsDelay is delay between attempts do do an eth client
// RPC call
EthClientAttemptsDelay time.Duration // EthTxResendTimeout is the timeout after which a non-mined ethereum
// transaction will be resent (reusing the nonce) with a newly
// calculated gas price
EthTxResendTimeout time.Duration // EthNoReuseNonce disables reusing nonces of pending transactions for
// new replacement transactions
EthNoReuseNonce bool // MaxGasPrice is the maximum gas price allowed for ethereum
// transactions
MaxGasPrice *big.Int // GasPriceIncPerc is the percentage increase of gas price set in an
// ethereum transaction from the suggested gas price by the ehtereum
// node
GasPriceIncPerc int64 // TxManagerCheckInterval is the waiting interval between receipt
// checks of ethereum transactions in the TxManager
TxManagerCheckInterval time.Duration // DebugBatchPath if set, specifies the path where batchInfo is stored
// in JSON in every step/update of the pipeline
DebugBatchPath string Purger PurgerCfg // VerifierIdx is the index of the verifier contract registered in the
// smart contract
VerifierIdx uint8 TxProcessorConfig txprocessor.Config }
func (c *Config) debugBatchStore(batchInfo *BatchInfo) { if c.DebugBatchPath != "" { if err := batchInfo.DebugStore(c.DebugBatchPath); err != nil { log.Warnw("Error storing debug BatchInfo", "path", c.DebugBatchPath, "err", err) } } }
type fromBatch struct { BatchNum common.BatchNum ForgerAddr ethCommon.Address StateRoot *big.Int }
// Coordinator implements the Coordinator type
type Coordinator struct { // State
pipelineNum int // Pipeline sequential number. The first pipeline is 1
pipelineFromBatch fromBatch // batch from which we started the pipeline
provers []prover.Client consts synchronizer.SCConsts vars synchronizer.SCVariables stats synchronizer.Stats started bool
cfg Config
historyDB *historydb.HistoryDB l2DB *l2db.L2DB txSelector *txselector.TxSelector batchBuilder *batchbuilder.BatchBuilder
msgCh chan interface{} ctx context.Context wg sync.WaitGroup cancel context.CancelFunc
pipeline *Pipeline lastNonFailedBatchNum common.BatchNum
purger *Purger txManager *TxManager }
// NewCoordinator creates a new Coordinator
func NewCoordinator(cfg Config, historyDB *historydb.HistoryDB, l2DB *l2db.L2DB, txSelector *txselector.TxSelector, batchBuilder *batchbuilder.BatchBuilder, serverProofs []prover.Client, ethClient eth.ClientInterface, scConsts *synchronizer.SCConsts, initSCVars *synchronizer.SCVariables, ) (*Coordinator, error) { // nolint reason: hardcoded `1.0`, by design the percentage can't be over 100%
if cfg.L1BatchTimeoutPerc >= 1.0 { //nolint:gomnd
return nil, tracerr.Wrap(fmt.Errorf("invalid value for Config.L1BatchTimeoutPerc (%v >= 1.0)", cfg.L1BatchTimeoutPerc)) } if cfg.EthClientAttempts < 1 { return nil, tracerr.Wrap(fmt.Errorf("invalid value for Config.EthClientAttempts (%v < 1)", cfg.EthClientAttempts)) }
if cfg.DebugBatchPath != "" { if err := os.MkdirAll(cfg.DebugBatchPath, 0744); err != nil { return nil, tracerr.Wrap(err) } }
purger := Purger{ cfg: cfg.Purger, lastPurgeBlock: 0, lastPurgeBatch: 0, lastInvalidateBlock: 0, lastInvalidateBatch: 0, }
ctx, cancel := context.WithCancel(context.Background()) c := Coordinator{ pipelineNum: 0, pipelineFromBatch: fromBatch{ BatchNum: 0, ForgerAddr: ethCommon.Address{}, StateRoot: big.NewInt(0), }, provers: serverProofs, consts: *scConsts, vars: *initSCVars,
cfg: cfg,
historyDB: historyDB, l2DB: l2DB, txSelector: txSelector, batchBuilder: batchBuilder,
purger: &purger,
msgCh: make(chan interface{}), ctx: ctx, // wg
cancel: cancel, } ctxTimeout, ctxTimeoutCancel := context.WithTimeout(ctx, 1*time.Second) defer ctxTimeoutCancel() txManager, err := NewTxManager(ctxTimeout, &cfg, ethClient, l2DB, &c, scConsts, initSCVars) if err != nil { return nil, tracerr.Wrap(err) } c.txManager = txManager // Set Eth LastBlockNum to -1 in stats so that stats.Synced() is
// guaranteed to return false before it's updated with a real stats
c.stats.Eth.LastBlock.Num = -1 return &c, nil }
// TxSelector returns the inner TxSelector
func (c *Coordinator) TxSelector() *txselector.TxSelector { return c.txSelector }
// BatchBuilder returns the inner BatchBuilder
func (c *Coordinator) BatchBuilder() *batchbuilder.BatchBuilder { return c.batchBuilder }
func (c *Coordinator) newPipeline(ctx context.Context) (*Pipeline, error) { c.pipelineNum++ return NewPipeline(ctx, c.cfg, c.pipelineNum, c.historyDB, c.l2DB, c.txSelector, c.batchBuilder, c.purger, c, c.txManager, c.provers, &c.consts) }
// MsgSyncBlock indicates an update to the Synchronizer stats
type MsgSyncBlock struct { Stats synchronizer.Stats Batches []common.BatchData // Vars contains each Smart Contract variables if they are updated, or
// nil if they haven't changed.
Vars synchronizer.SCVariablesPtr }
// MsgSyncReorg indicates a reorg
type MsgSyncReorg struct { Stats synchronizer.Stats Vars synchronizer.SCVariablesPtr }
// MsgStopPipeline indicates a signal to reset the pipeline
type MsgStopPipeline struct { Reason string // FailedBatchNum indicates the first batchNum that failed in the
// pipeline. If FailedBatchNum is 0, it should be ignored.
FailedBatchNum common.BatchNum }
// SendMsg is a thread safe method to pass a message to the Coordinator
func (c *Coordinator) SendMsg(ctx context.Context, msg interface{}) { select { case c.msgCh <- msg: case <-ctx.Done(): } }
func updateSCVars(vars *synchronizer.SCVariables, update synchronizer.SCVariablesPtr) { if update.Rollup != nil { vars.Rollup = *update.Rollup } if update.Auction != nil { vars.Auction = *update.Auction } if update.WDelayer != nil { vars.WDelayer = *update.WDelayer } }
func (c *Coordinator) syncSCVars(vars synchronizer.SCVariablesPtr) { updateSCVars(&c.vars, vars) }
func canForge(auctionConstants *common.AuctionConstants, auctionVars *common.AuctionVariables, currentSlot *common.Slot, nextSlot *common.Slot, addr ethCommon.Address, blockNum int64) bool { if blockNum < auctionConstants.GenesisBlockNum { log.Infow("canForge: requested blockNum is < genesis", "blockNum", blockNum, "genesis", auctionConstants.GenesisBlockNum) return false } var slot *common.Slot if currentSlot.StartBlock <= blockNum && blockNum <= currentSlot.EndBlock { slot = currentSlot } else if nextSlot.StartBlock <= blockNum && blockNum <= nextSlot.EndBlock { slot = nextSlot } else { log.Warnw("canForge: requested blockNum is outside current and next slot", "blockNum", blockNum, "currentSlot", currentSlot, "nextSlot", nextSlot, ) return false } anyoneForge := false if !slot.ForgerCommitment && auctionConstants.RelativeBlock(blockNum) >= int64(auctionVars.SlotDeadline) { log.Debugw("canForge: anyone can forge in the current slot (slotDeadline passed)", "block", blockNum) anyoneForge = true } if slot.Forger == addr || anyoneForge { return true } log.Debugw("canForge: can't forge", "slot.Forger", slot.Forger) return false }
func (c *Coordinator) canForgeAt(blockNum int64) bool { return canForge(&c.consts.Auction, &c.vars.Auction, &c.stats.Sync.Auction.CurrentSlot, &c.stats.Sync.Auction.NextSlot, c.cfg.ForgerAddress, blockNum) }
func (c *Coordinator) canForge() bool { blockNum := c.stats.Eth.LastBlock.Num + 1 return canForge(&c.consts.Auction, &c.vars.Auction, &c.stats.Sync.Auction.CurrentSlot, &c.stats.Sync.Auction.NextSlot, c.cfg.ForgerAddress, blockNum) }
func (c *Coordinator) syncStats(ctx context.Context, stats *synchronizer.Stats) error { nextBlock := c.stats.Eth.LastBlock.Num + 1 canForge := c.canForgeAt(nextBlock) if c.cfg.ScheduleBatchBlocksAheadCheck != 0 && canForge { canForge = c.canForgeAt(nextBlock + c.cfg.ScheduleBatchBlocksAheadCheck) } if c.pipeline == nil { relativeBlock := c.consts.Auction.RelativeBlock(nextBlock) if canForge && relativeBlock < c.cfg.StartSlotBlocksDelay { log.Debugf("Coordinator: delaying pipeline start due to "+ "relativeBlock (%v) < cfg.StartSlotBlocksDelay (%v)", relativeBlock, c.cfg.StartSlotBlocksDelay) } else if canForge { log.Infow("Coordinator: forging state begin", "block", stats.Eth.LastBlock.Num+1, "batch", stats.Sync.LastBatch.BatchNum) fromBatch := fromBatch{ BatchNum: stats.Sync.LastBatch.BatchNum, ForgerAddr: stats.Sync.LastBatch.ForgerAddr, StateRoot: stats.Sync.LastBatch.StateRoot, } if c.lastNonFailedBatchNum > fromBatch.BatchNum { fromBatch.BatchNum = c.lastNonFailedBatchNum fromBatch.ForgerAddr = c.cfg.ForgerAddress fromBatch.StateRoot = big.NewInt(0) } var err error if c.pipeline, err = c.newPipeline(ctx); err != nil { return tracerr.Wrap(err) } c.pipelineFromBatch = fromBatch if err := c.pipeline.Start(fromBatch.BatchNum, stats, &c.vars); err != nil { c.pipeline = nil return tracerr.Wrap(err) } } } else { if !canForge { log.Infow("Coordinator: forging state end", "block", stats.Eth.LastBlock.Num+1) c.pipeline.Stop(c.ctx) c.pipeline = nil } } if c.pipeline == nil { if _, err := c.purger.InvalidateMaybe(c.l2DB, c.txSelector.LocalAccountsDB(), stats.Sync.LastBlock.Num, int64(stats.Sync.LastBatch.BatchNum)); err != nil { return tracerr.Wrap(err) } if _, err := c.purger.PurgeMaybe(c.l2DB, stats.Sync.LastBlock.Num, int64(stats.Sync.LastBatch.BatchNum)); err != nil { return tracerr.Wrap(err) } } return nil }
func (c *Coordinator) handleMsgSyncBlock(ctx context.Context, msg *MsgSyncBlock) error { c.stats = msg.Stats c.syncSCVars(msg.Vars) c.txManager.SetSyncStatsVars(ctx, &msg.Stats, &msg.Vars) if c.pipeline != nil { c.pipeline.SetSyncStatsVars(ctx, &msg.Stats, &msg.Vars) } if !c.stats.Synced() { return nil } return c.syncStats(ctx, &c.stats) }
func (c *Coordinator) handleReorg(ctx context.Context, msg *MsgSyncReorg) error { c.stats = msg.Stats c.syncSCVars(msg.Vars) c.txManager.SetSyncStatsVars(ctx, &msg.Stats, &msg.Vars) if c.pipeline != nil { c.pipeline.SetSyncStatsVars(ctx, &msg.Stats, &msg.Vars) } if c.stats.Sync.LastBatch.ForgerAddr != c.cfg.ForgerAddress && (c.stats.Sync.LastBatch.StateRoot == nil || c.pipelineFromBatch.StateRoot == nil || c.stats.Sync.LastBatch.StateRoot.Cmp(c.pipelineFromBatch.StateRoot) != 0) { // There's been a reorg and the batch state root from which the
// pipeline was started has changed (probably because it was in
// a block that was discarded), and it was sent by a different
// coordinator than us. That batch may never be in the main
// chain, so we stop the pipeline (it will be started again
// once the node is in sync).
log.Infow("Coordinator.handleReorg StopPipeline sync.LastBatch.ForgerAddr != cfg.ForgerAddr "+ "& sync.LastBatch.StateRoot != pipelineFromBatch.StateRoot", "sync.LastBatch.StateRoot", c.stats.Sync.LastBatch.StateRoot, "pipelineFromBatch.StateRoot", c.pipelineFromBatch.StateRoot) c.txManager.DiscardPipeline(ctx, c.pipelineNum) if err := c.handleStopPipeline(ctx, "reorg", 0); err != nil { return tracerr.Wrap(err) } } return nil }
// handleStopPipeline handles stopping the pipeline. If failedBatchNum is 0,
// the next pipeline will start from the last state of the synchronizer,
// otherwise, it will state from failedBatchNum-1.
func (c *Coordinator) handleStopPipeline(ctx context.Context, reason string, failedBatchNum common.BatchNum) error { batchNum := c.stats.Sync.LastBatch.BatchNum if failedBatchNum != 0 { batchNum = failedBatchNum - 1 } if c.pipeline != nil { c.pipeline.Stop(c.ctx) c.pipeline = nil } if err := c.l2DB.Reorg(batchNum); err != nil { return tracerr.Wrap(err) } c.lastNonFailedBatchNum = batchNum return nil }
func (c *Coordinator) handleMsg(ctx context.Context, msg interface{}) error { switch msg := msg.(type) { case MsgSyncBlock: if err := c.handleMsgSyncBlock(ctx, &msg); err != nil { return tracerr.Wrap(fmt.Errorf("Coordinator.handleMsgSyncBlock error: %w", err)) } case MsgSyncReorg: if err := c.handleReorg(ctx, &msg); err != nil { return tracerr.Wrap(fmt.Errorf("Coordinator.handleReorg error: %w", err)) } case MsgStopPipeline: log.Infow("Coordinator received MsgStopPipeline", "reason", msg.Reason) if err := c.handleStopPipeline(ctx, msg.Reason, msg.FailedBatchNum); err != nil { return tracerr.Wrap(fmt.Errorf("Coordinator.handleStopPipeline: %w", err)) } default: log.Fatalw("Coordinator Unexpected Coordinator msg of type %T: %+v", msg, msg) } return nil }
// Start the coordinator
func (c *Coordinator) Start() { if c.started { log.Fatal("Coordinator already started") } c.started = true c.wg.Add(1) go func() { c.txManager.Run(c.ctx) c.wg.Done() }()
c.wg.Add(1) go func() { waitDuration := longWaitDuration for { select { case <-c.ctx.Done(): log.Info("Coordinator done") c.wg.Done() return case msg := <-c.msgCh: if err := c.handleMsg(c.ctx, msg); c.ctx.Err() != nil { continue } else if err != nil { log.Errorw("Coordinator.handleMsg", "err", err) waitDuration = c.cfg.SyncRetryInterval continue } waitDuration = longWaitDuration case <-time.After(waitDuration): if !c.stats.Synced() { waitDuration = longWaitDuration continue } if err := c.syncStats(c.ctx, &c.stats); c.ctx.Err() != nil { continue } else if err != nil { log.Errorw("Coordinator.syncStats", "err", err) waitDuration = c.cfg.SyncRetryInterval continue } waitDuration = longWaitDuration } } }() }
const stopCtxTimeout = 200 * time.Millisecond
// Stop the coordinator
func (c *Coordinator) Stop() { if !c.started { log.Fatal("Coordinator already stopped") } c.started = false log.Infow("Stopping Coordinator...") c.cancel() c.wg.Wait() if c.pipeline != nil { ctx, cancel := context.WithTimeout(context.Background(), stopCtxTimeout) defer cancel() c.pipeline.Stop(ctx) c.pipeline = nil } }
|