You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

548 lines
18 KiB

Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Redo coordinator structure, connect API to node - API: - Modify the constructor so that hardcoded rollup constants don't need to be passed (introduce a `Config` and use `configAPI` internally) - Common: - Update rollup constants with proper *big.Int when required - Add BidCoordinator and Slot structs used by the HistoryDB and Synchronizer. - Add helper methods to AuctionConstants - AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL table: `default_slot_set_bid_slot_num`), which indicates at which slotNum does the `DefaultSlotSetBid` specified starts applying. - Config: - Move coordinator exclusive configuration from the node config to the coordinator config - Coordinator: - Reorganize the code towards having the goroutines started and stopped from the coordinator itself instead of the node. - Remove all stop and stopped channels, and use context.Context and sync.WaitGroup instead. - Remove BatchInfo setters and assing variables directly - In ServerProof and ServerProofPool use context instead stop channel. - Use message passing to notify the coordinator about sync updates and reorgs - Introduce the Pipeline, which can be started and stopped by the Coordinator - Introduce the TxManager, which manages ethereum transactions (the TxManager is also in charge of making the forge call to the rollup smart contract). The TxManager keeps ethereum transactions and: 1. Waits for the transaction to be accepted 2. Waits for the transaction to be confirmed for N blocks - In forge logic, first prepare a batch and then wait for an available server proof to have all work ready once the proof server is ready. - Remove the `isForgeSequence` method which was querying the smart contract, and instead use notifications sent by the Synchronizer to figure out if it's forging time. - Update test (which is a minimal test to manually see if the coordinator starts) - HistoryDB: - Add method to get the number of batches in a slot (used to detect when a slot has passed the bid winner forging deadline) - Add method to get the best bid and associated coordinator of a slot (used to detect the forgerAddress that can forge the slot) - General: - Rename some instances of `currentBlock` to `lastBlock` to be more clear. - Node: - Connect the API to the node and call the methods to update cached state when the sync advances blocks. - Call methods to update Coordinator state when the sync advances blocks and finds reorgs. - Synchronizer: - Add Auction field in the Stats, which contain the current slot with info about highest bidder and other related info required to know who can forge in the current block. - Better organization of cached state: - On Sync, update the internal cached state - On Init or Reorg, load the state from HistoryDB into the internal cached state.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
Update coordinator, call all api update functions - Common: - Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition - API: - Add UpdateNetworkInfoBlock to update just block information, to be used when the node is not yet synchronized - Node: - Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with configurable time intervals - Synchronizer: - When mapping events by TxHash, use an array to support the possibility of multiple calls of the same function happening in the same transaction (for example, a smart contract in a single transaction could call withdraw with delay twice, which would generate 2 withdraw events, and 2 deposit events). - In Stats, keep entire LastBlock instead of just the blockNum - In Stats, add lastL1BatchBlock - Test Stats and SCVars - Coordinator: - Enable writing the BatchInfo in every step of the pipeline to disk (with JSON text files) for debugging purposes. - Move the Pipeline functionality from the Coordinator to its own struct (Pipeline) - Implement shouldL1lL2Batch - In TxManager, implement logic to perform several attempts when doing ethereum node RPC calls before considering the error. (Both for calls to forgeBatch and transaction receipt) - In TxManager, reorganize the flow and note the specific points in which actions are made when err != nil - HistoryDB: - Implement GetLastL1BatchBlockNum: returns the blockNum of the latest forged l1Batch, to help the coordinator decide when to forge an L1Batch. - EthereumClient and test.Client: - Update EthBlockByNumber to return the last block when the passed number is -1.
3 years ago
  1. package coordinator
  2. import (
  3. "context"
  4. "fmt"
  5. "math/big"
  6. "os"
  7. "sync"
  8. "time"
  9. ethCommon "github.com/ethereum/go-ethereum/common"
  10. "github.com/hermeznetwork/hermez-node/batchbuilder"
  11. "github.com/hermeznetwork/hermez-node/common"
  12. "github.com/hermeznetwork/hermez-node/db/historydb"
  13. "github.com/hermeznetwork/hermez-node/db/l2db"
  14. "github.com/hermeznetwork/hermez-node/eth"
  15. "github.com/hermeznetwork/hermez-node/log"
  16. "github.com/hermeznetwork/hermez-node/prover"
  17. "github.com/hermeznetwork/hermez-node/synchronizer"
  18. "github.com/hermeznetwork/hermez-node/txprocessor"
  19. "github.com/hermeznetwork/hermez-node/txselector"
  20. "github.com/hermeznetwork/tracerr"
  21. )
  22. var (
  23. errLastL1BatchNotSynced = fmt.Errorf("last L1Batch not synced yet")
  24. errForgeNoTxsBeforeDelay = fmt.Errorf("no txs to forge and we haven't reached the forge no txs delay")
  25. errForgeBeforeDelay = fmt.Errorf("we haven't reached the forge delay")
  26. )
  27. const (
  28. queueLen = 16
  29. longWaitDuration = 999 * time.Hour
  30. zeroDuration = 0 * time.Second
  31. )
  32. // Config contains the Coordinator configuration
  33. type Config struct {
  34. // ForgerAddress is the address under which this coordinator is forging
  35. ForgerAddress ethCommon.Address
  36. // ConfirmBlocks is the number of confirmation blocks to wait for sent
  37. // ethereum transactions before forgetting about them
  38. ConfirmBlocks int64
  39. // L1BatchTimeoutPerc is the portion of the range before the L1Batch
  40. // timeout that will trigger a schedule to forge an L1Batch
  41. L1BatchTimeoutPerc float64
  42. // StartSlotBlocksDelay is the number of blocks of delay to wait before
  43. // starting the pipeline when we reach a slot in which we can forge.
  44. StartSlotBlocksDelay int64
  45. // ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which
  46. // the forger address is checked to be allowed to forge (apart from
  47. // checking the next block), used to decide when to stop scheduling new
  48. // batches (by stopping the pipeline).
  49. // For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck
  50. // is 5, eventhough at block 11 we canForge, the pipeline will be
  51. // stopped if we can't forge at block 15.
  52. // This value should be the expected number of blocks it takes between
  53. // scheduling a batch and having it mined.
  54. ScheduleBatchBlocksAheadCheck int64
  55. // SendBatchBlocksMarginCheck is the number of margin blocks ahead in
  56. // which the coordinator is also checked to be allowed to forge, apart
  57. // from the next block; used to decide when to stop sending batches to
  58. // the smart contract.
  59. // For example, if we are at block 10 and SendBatchBlocksMarginCheck is
  60. // 5, eventhough at block 11 we canForge, the batch will be discarded
  61. // if we can't forge at block 15.
  62. // This value should be the expected number of blocks it takes between
  63. // sending a batch and having it mined.
  64. SendBatchBlocksMarginCheck int64
  65. // EthClientAttempts is the number of attempts to do an eth client RPC
  66. // call before giving up
  67. EthClientAttempts int
  68. // ForgeRetryInterval is the waiting interval between calls forge a
  69. // batch after an error
  70. ForgeRetryInterval time.Duration
  71. // ForgeDelay is the delay after which a batch is forged if the slot is
  72. // already committed. If set to 0s, the coordinator will continuously
  73. // forge at the maximum rate.
  74. ForgeDelay time.Duration
  75. // ForgeNoTxsDelay is the delay after which a batch is forged even if
  76. // there are no txs to forge if the slot is already committed. If set
  77. // to 0s, the coordinator will continuously forge even if the batches
  78. // are empty.
  79. ForgeNoTxsDelay time.Duration
  80. // SyncRetryInterval is the waiting interval between calls to the main
  81. // handler of a synced block after an error
  82. SyncRetryInterval time.Duration
  83. // EthClientAttemptsDelay is delay between attempts do do an eth client
  84. // RPC call
  85. EthClientAttemptsDelay time.Duration
  86. // EthTxResendTimeout is the timeout after which a non-mined ethereum
  87. // transaction will be resent (reusing the nonce) with a newly
  88. // calculated gas price
  89. EthTxResendTimeout time.Duration
  90. // EthNoReuseNonce disables reusing nonces of pending transactions for
  91. // new replacement transactions
  92. EthNoReuseNonce bool
  93. // MaxGasPrice is the maximum gas price allowed for ethereum
  94. // transactions
  95. MaxGasPrice *big.Int
  96. // GasPriceIncPerc is the percentage increase of gas price set in an
  97. // ethereum transaction from the suggested gas price by the ehtereum
  98. // node
  99. GasPriceIncPerc int64
  100. // TxManagerCheckInterval is the waiting interval between receipt
  101. // checks of ethereum transactions in the TxManager
  102. TxManagerCheckInterval time.Duration
  103. // DebugBatchPath if set, specifies the path where batchInfo is stored
  104. // in JSON in every step/update of the pipeline
  105. DebugBatchPath string
  106. Purger PurgerCfg
  107. // VerifierIdx is the index of the verifier contract registered in the
  108. // smart contract
  109. VerifierIdx uint8
  110. TxProcessorConfig txprocessor.Config
  111. }
  112. func (c *Config) debugBatchStore(batchInfo *BatchInfo) {
  113. if c.DebugBatchPath != "" {
  114. if err := batchInfo.DebugStore(c.DebugBatchPath); err != nil {
  115. log.Warnw("Error storing debug BatchInfo",
  116. "path", c.DebugBatchPath, "err", err)
  117. }
  118. }
  119. }
  120. type fromBatch struct {
  121. BatchNum common.BatchNum
  122. ForgerAddr ethCommon.Address
  123. StateRoot *big.Int
  124. }
  125. // Coordinator implements the Coordinator type
  126. type Coordinator struct {
  127. // State
  128. pipelineNum int // Pipeline sequential number. The first pipeline is 1
  129. pipelineFromBatch fromBatch // batch from which we started the pipeline
  130. provers []prover.Client
  131. consts synchronizer.SCConsts
  132. vars synchronizer.SCVariables
  133. stats synchronizer.Stats
  134. started bool
  135. cfg Config
  136. historyDB *historydb.HistoryDB
  137. l2DB *l2db.L2DB
  138. txSelector *txselector.TxSelector
  139. batchBuilder *batchbuilder.BatchBuilder
  140. msgCh chan interface{}
  141. ctx context.Context
  142. wg sync.WaitGroup
  143. cancel context.CancelFunc
  144. pipeline *Pipeline
  145. lastNonFailedBatchNum common.BatchNum
  146. purger *Purger
  147. txManager *TxManager
  148. }
  149. // NewCoordinator creates a new Coordinator
  150. func NewCoordinator(cfg Config,
  151. historyDB *historydb.HistoryDB,
  152. l2DB *l2db.L2DB,
  153. txSelector *txselector.TxSelector,
  154. batchBuilder *batchbuilder.BatchBuilder,
  155. serverProofs []prover.Client,
  156. ethClient eth.ClientInterface,
  157. scConsts *synchronizer.SCConsts,
  158. initSCVars *synchronizer.SCVariables,
  159. ) (*Coordinator, error) {
  160. // nolint reason: hardcoded `1.0`, by design the percentage can't be over 100%
  161. if cfg.L1BatchTimeoutPerc >= 1.0 { //nolint:gomnd
  162. return nil, tracerr.Wrap(fmt.Errorf("invalid value for Config.L1BatchTimeoutPerc (%v >= 1.0)",
  163. cfg.L1BatchTimeoutPerc))
  164. }
  165. if cfg.EthClientAttempts < 1 {
  166. return nil, tracerr.Wrap(fmt.Errorf("invalid value for Config.EthClientAttempts (%v < 1)",
  167. cfg.EthClientAttempts))
  168. }
  169. if cfg.DebugBatchPath != "" {
  170. if err := os.MkdirAll(cfg.DebugBatchPath, 0744); err != nil {
  171. return nil, tracerr.Wrap(err)
  172. }
  173. }
  174. purger := Purger{
  175. cfg: cfg.Purger,
  176. lastPurgeBlock: 0,
  177. lastPurgeBatch: 0,
  178. lastInvalidateBlock: 0,
  179. lastInvalidateBatch: 0,
  180. }
  181. ctx, cancel := context.WithCancel(context.Background())
  182. c := Coordinator{
  183. pipelineNum: 0,
  184. pipelineFromBatch: fromBatch{
  185. BatchNum: 0,
  186. ForgerAddr: ethCommon.Address{},
  187. StateRoot: big.NewInt(0),
  188. },
  189. provers: serverProofs,
  190. consts: *scConsts,
  191. vars: *initSCVars,
  192. cfg: cfg,
  193. historyDB: historyDB,
  194. l2DB: l2DB,
  195. txSelector: txSelector,
  196. batchBuilder: batchBuilder,
  197. purger: &purger,
  198. msgCh: make(chan interface{}),
  199. ctx: ctx,
  200. // wg
  201. cancel: cancel,
  202. }
  203. ctxTimeout, ctxTimeoutCancel := context.WithTimeout(ctx, 1*time.Second)
  204. defer ctxTimeoutCancel()
  205. txManager, err := NewTxManager(ctxTimeout, &cfg, ethClient, l2DB, &c,
  206. scConsts, initSCVars)
  207. if err != nil {
  208. return nil, tracerr.Wrap(err)
  209. }
  210. c.txManager = txManager
  211. // Set Eth LastBlockNum to -1 in stats so that stats.Synced() is
  212. // guaranteed to return false before it's updated with a real stats
  213. c.stats.Eth.LastBlock.Num = -1
  214. return &c, nil
  215. }
  216. // TxSelector returns the inner TxSelector
  217. func (c *Coordinator) TxSelector() *txselector.TxSelector {
  218. return c.txSelector
  219. }
  220. // BatchBuilder returns the inner BatchBuilder
  221. func (c *Coordinator) BatchBuilder() *batchbuilder.BatchBuilder {
  222. return c.batchBuilder
  223. }
  224. func (c *Coordinator) newPipeline(ctx context.Context) (*Pipeline, error) {
  225. c.pipelineNum++
  226. return NewPipeline(ctx, c.cfg, c.pipelineNum, c.historyDB, c.l2DB, c.txSelector,
  227. c.batchBuilder, c.purger, c, c.txManager, c.provers, &c.consts)
  228. }
  229. // MsgSyncBlock indicates an update to the Synchronizer stats
  230. type MsgSyncBlock struct {
  231. Stats synchronizer.Stats
  232. Batches []common.BatchData
  233. // Vars contains each Smart Contract variables if they are updated, or
  234. // nil if they haven't changed.
  235. Vars synchronizer.SCVariablesPtr
  236. }
  237. // MsgSyncReorg indicates a reorg
  238. type MsgSyncReorg struct {
  239. Stats synchronizer.Stats
  240. Vars synchronizer.SCVariablesPtr
  241. }
  242. // MsgStopPipeline indicates a signal to reset the pipeline
  243. type MsgStopPipeline struct {
  244. Reason string
  245. // FailedBatchNum indicates the first batchNum that failed in the
  246. // pipeline. If FailedBatchNum is 0, it should be ignored.
  247. FailedBatchNum common.BatchNum
  248. }
  249. // SendMsg is a thread safe method to pass a message to the Coordinator
  250. func (c *Coordinator) SendMsg(ctx context.Context, msg interface{}) {
  251. select {
  252. case c.msgCh <- msg:
  253. case <-ctx.Done():
  254. }
  255. }
  256. func updateSCVars(vars *synchronizer.SCVariables, update synchronizer.SCVariablesPtr) {
  257. if update.Rollup != nil {
  258. vars.Rollup = *update.Rollup
  259. }
  260. if update.Auction != nil {
  261. vars.Auction = *update.Auction
  262. }
  263. if update.WDelayer != nil {
  264. vars.WDelayer = *update.WDelayer
  265. }
  266. }
  267. func (c *Coordinator) syncSCVars(vars synchronizer.SCVariablesPtr) {
  268. updateSCVars(&c.vars, vars)
  269. }
  270. func canForge(auctionConstants *common.AuctionConstants, auctionVars *common.AuctionVariables,
  271. currentSlot *common.Slot, nextSlot *common.Slot, addr ethCommon.Address, blockNum int64) bool {
  272. if blockNum < auctionConstants.GenesisBlockNum {
  273. log.Infow("canForge: requested blockNum is < genesis", "blockNum", blockNum,
  274. "genesis", auctionConstants.GenesisBlockNum)
  275. return false
  276. }
  277. var slot *common.Slot
  278. if currentSlot.StartBlock <= blockNum && blockNum <= currentSlot.EndBlock {
  279. slot = currentSlot
  280. } else if nextSlot.StartBlock <= blockNum && blockNum <= nextSlot.EndBlock {
  281. slot = nextSlot
  282. } else {
  283. log.Warnw("canForge: requested blockNum is outside current and next slot",
  284. "blockNum", blockNum, "currentSlot", currentSlot,
  285. "nextSlot", nextSlot,
  286. )
  287. return false
  288. }
  289. anyoneForge := false
  290. if !slot.ForgerCommitment &&
  291. auctionConstants.RelativeBlock(blockNum) >= int64(auctionVars.SlotDeadline) {
  292. log.Debugw("canForge: anyone can forge in the current slot (slotDeadline passed)",
  293. "block", blockNum)
  294. anyoneForge = true
  295. }
  296. if slot.Forger == addr || anyoneForge {
  297. return true
  298. }
  299. log.Debugw("canForge: can't forge", "slot.Forger", slot.Forger)
  300. return false
  301. }
  302. func (c *Coordinator) canForgeAt(blockNum int64) bool {
  303. return canForge(&c.consts.Auction, &c.vars.Auction,
  304. &c.stats.Sync.Auction.CurrentSlot, &c.stats.Sync.Auction.NextSlot,
  305. c.cfg.ForgerAddress, blockNum)
  306. }
  307. func (c *Coordinator) canForge() bool {
  308. blockNum := c.stats.Eth.LastBlock.Num + 1
  309. return canForge(&c.consts.Auction, &c.vars.Auction,
  310. &c.stats.Sync.Auction.CurrentSlot, &c.stats.Sync.Auction.NextSlot,
  311. c.cfg.ForgerAddress, blockNum)
  312. }
  313. func (c *Coordinator) syncStats(ctx context.Context, stats *synchronizer.Stats) error {
  314. nextBlock := c.stats.Eth.LastBlock.Num + 1
  315. canForge := c.canForgeAt(nextBlock)
  316. if c.cfg.ScheduleBatchBlocksAheadCheck != 0 && canForge {
  317. canForge = c.canForgeAt(nextBlock + c.cfg.ScheduleBatchBlocksAheadCheck)
  318. }
  319. if c.pipeline == nil {
  320. relativeBlock := c.consts.Auction.RelativeBlock(nextBlock)
  321. if canForge && relativeBlock < c.cfg.StartSlotBlocksDelay {
  322. log.Debugf("Coordinator: delaying pipeline start due to "+
  323. "relativeBlock (%v) < cfg.StartSlotBlocksDelay (%v)",
  324. relativeBlock, c.cfg.StartSlotBlocksDelay)
  325. } else if canForge {
  326. log.Infow("Coordinator: forging state begin", "block",
  327. stats.Eth.LastBlock.Num+1, "batch", stats.Sync.LastBatch.BatchNum)
  328. fromBatch := fromBatch{
  329. BatchNum: stats.Sync.LastBatch.BatchNum,
  330. ForgerAddr: stats.Sync.LastBatch.ForgerAddr,
  331. StateRoot: stats.Sync.LastBatch.StateRoot,
  332. }
  333. if c.lastNonFailedBatchNum > fromBatch.BatchNum {
  334. fromBatch.BatchNum = c.lastNonFailedBatchNum
  335. fromBatch.ForgerAddr = c.cfg.ForgerAddress
  336. fromBatch.StateRoot = big.NewInt(0)
  337. }
  338. var err error
  339. if c.pipeline, err = c.newPipeline(ctx); err != nil {
  340. return tracerr.Wrap(err)
  341. }
  342. c.pipelineFromBatch = fromBatch
  343. if err := c.pipeline.Start(fromBatch.BatchNum, stats, &c.vars); err != nil {
  344. c.pipeline = nil
  345. return tracerr.Wrap(err)
  346. }
  347. }
  348. } else {
  349. if !canForge {
  350. log.Infow("Coordinator: forging state end", "block", stats.Eth.LastBlock.Num+1)
  351. c.pipeline.Stop(c.ctx)
  352. c.pipeline = nil
  353. }
  354. }
  355. if c.pipeline == nil {
  356. if _, err := c.purger.InvalidateMaybe(c.l2DB, c.txSelector.LocalAccountsDB(),
  357. stats.Sync.LastBlock.Num, int64(stats.Sync.LastBatch.BatchNum)); err != nil {
  358. return tracerr.Wrap(err)
  359. }
  360. if _, err := c.purger.PurgeMaybe(c.l2DB, stats.Sync.LastBlock.Num,
  361. int64(stats.Sync.LastBatch.BatchNum)); err != nil {
  362. return tracerr.Wrap(err)
  363. }
  364. }
  365. return nil
  366. }
  367. func (c *Coordinator) handleMsgSyncBlock(ctx context.Context, msg *MsgSyncBlock) error {
  368. c.stats = msg.Stats
  369. c.syncSCVars(msg.Vars)
  370. c.txManager.SetSyncStatsVars(ctx, &msg.Stats, &msg.Vars)
  371. if c.pipeline != nil {
  372. c.pipeline.SetSyncStatsVars(ctx, &msg.Stats, &msg.Vars)
  373. }
  374. if !c.stats.Synced() {
  375. return nil
  376. }
  377. return c.syncStats(ctx, &c.stats)
  378. }
  379. func (c *Coordinator) handleReorg(ctx context.Context, msg *MsgSyncReorg) error {
  380. c.stats = msg.Stats
  381. c.syncSCVars(msg.Vars)
  382. c.txManager.SetSyncStatsVars(ctx, &msg.Stats, &msg.Vars)
  383. if c.pipeline != nil {
  384. c.pipeline.SetSyncStatsVars(ctx, &msg.Stats, &msg.Vars)
  385. }
  386. if c.stats.Sync.LastBatch.ForgerAddr != c.cfg.ForgerAddress &&
  387. (c.stats.Sync.LastBatch.StateRoot == nil || c.pipelineFromBatch.StateRoot == nil ||
  388. c.stats.Sync.LastBatch.StateRoot.Cmp(c.pipelineFromBatch.StateRoot) != 0) {
  389. // There's been a reorg and the batch state root from which the
  390. // pipeline was started has changed (probably because it was in
  391. // a block that was discarded), and it was sent by a different
  392. // coordinator than us. That batch may never be in the main
  393. // chain, so we stop the pipeline (it will be started again
  394. // once the node is in sync).
  395. log.Infow("Coordinator.handleReorg StopPipeline sync.LastBatch.ForgerAddr != cfg.ForgerAddr "+
  396. "& sync.LastBatch.StateRoot != pipelineFromBatch.StateRoot",
  397. "sync.LastBatch.StateRoot", c.stats.Sync.LastBatch.StateRoot,
  398. "pipelineFromBatch.StateRoot", c.pipelineFromBatch.StateRoot)
  399. c.txManager.DiscardPipeline(ctx, c.pipelineNum)
  400. if err := c.handleStopPipeline(ctx, "reorg", 0); err != nil {
  401. return tracerr.Wrap(err)
  402. }
  403. }
  404. return nil
  405. }
  406. // handleStopPipeline handles stopping the pipeline. If failedBatchNum is 0,
  407. // the next pipeline will start from the last state of the synchronizer,
  408. // otherwise, it will state from failedBatchNum-1.
  409. func (c *Coordinator) handleStopPipeline(ctx context.Context, reason string, failedBatchNum common.BatchNum) error {
  410. batchNum := c.stats.Sync.LastBatch.BatchNum
  411. if failedBatchNum != 0 {
  412. batchNum = failedBatchNum - 1
  413. }
  414. if c.pipeline != nil {
  415. c.pipeline.Stop(c.ctx)
  416. c.pipeline = nil
  417. }
  418. if err := c.l2DB.Reorg(batchNum); err != nil {
  419. return tracerr.Wrap(err)
  420. }
  421. c.lastNonFailedBatchNum = batchNum
  422. return nil
  423. }
  424. func (c *Coordinator) handleMsg(ctx context.Context, msg interface{}) error {
  425. switch msg := msg.(type) {
  426. case MsgSyncBlock:
  427. if err := c.handleMsgSyncBlock(ctx, &msg); err != nil {
  428. return tracerr.Wrap(fmt.Errorf("Coordinator.handleMsgSyncBlock error: %w", err))
  429. }
  430. case MsgSyncReorg:
  431. if err := c.handleReorg(ctx, &msg); err != nil {
  432. return tracerr.Wrap(fmt.Errorf("Coordinator.handleReorg error: %w", err))
  433. }
  434. case MsgStopPipeline:
  435. log.Infow("Coordinator received MsgStopPipeline", "reason", msg.Reason)
  436. if err := c.handleStopPipeline(ctx, msg.Reason, msg.FailedBatchNum); err != nil {
  437. return tracerr.Wrap(fmt.Errorf("Coordinator.handleStopPipeline: %w", err))
  438. }
  439. default:
  440. log.Fatalw("Coordinator Unexpected Coordinator msg of type %T: %+v", msg, msg)
  441. }
  442. return nil
  443. }
  444. // Start the coordinator
  445. func (c *Coordinator) Start() {
  446. if c.started {
  447. log.Fatal("Coordinator already started")
  448. }
  449. c.started = true
  450. c.wg.Add(1)
  451. go func() {
  452. c.txManager.Run(c.ctx)
  453. c.wg.Done()
  454. }()
  455. c.wg.Add(1)
  456. go func() {
  457. waitDuration := longWaitDuration
  458. for {
  459. select {
  460. case <-c.ctx.Done():
  461. log.Info("Coordinator done")
  462. c.wg.Done()
  463. return
  464. case msg := <-c.msgCh:
  465. if err := c.handleMsg(c.ctx, msg); c.ctx.Err() != nil {
  466. continue
  467. } else if err != nil {
  468. log.Errorw("Coordinator.handleMsg", "err", err)
  469. waitDuration = c.cfg.SyncRetryInterval
  470. continue
  471. }
  472. waitDuration = longWaitDuration
  473. case <-time.After(waitDuration):
  474. if !c.stats.Synced() {
  475. waitDuration = longWaitDuration
  476. continue
  477. }
  478. if err := c.syncStats(c.ctx, &c.stats); c.ctx.Err() != nil {
  479. continue
  480. } else if err != nil {
  481. log.Errorw("Coordinator.syncStats", "err", err)
  482. waitDuration = c.cfg.SyncRetryInterval
  483. continue
  484. }
  485. waitDuration = longWaitDuration
  486. }
  487. }
  488. }()
  489. }
  490. const stopCtxTimeout = 200 * time.Millisecond
  491. // Stop the coordinator
  492. func (c *Coordinator) Stop() {
  493. if !c.started {
  494. log.Fatal("Coordinator already stopped")
  495. }
  496. c.started = false
  497. log.Infow("Stopping Coordinator...")
  498. c.cancel()
  499. c.wg.Wait()
  500. if c.pipeline != nil {
  501. ctx, cancel := context.WithTimeout(context.Background(), stopCtxTimeout)
  502. defer cancel()
  503. c.pipeline.Stop(ctx)
  504. c.pipeline = nil
  505. }
  506. }