Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago |
|
package eth
import ( "math/big" "testing"
"github.com/stretchr/testify/assert" "github.com/stretchr/testify/require" )
const slotDeadlineConst = uint8(20) const openAuctionSlotsConst = uint16(4320) const closedAuctionSlotsConst = uint16(2) const outbiddingConst = uint16(1000) const currentSlotConst = 0 const blocksPerSlot = uint8(40) const minBidStr = "10000000000000000000" const URL = "http://localhost:3000"
var allocationRatioConst [3]uint16 = [3]uint16{4000, 4000, 2000} var auctionClientTest *AuctionClient
func TestAuctionGetCurrentSlotNumber(t *testing.T) { currentSlot, err := auctionClientTest.AuctionGetCurrentSlotNumber() require.Nil(t, err) currentSlotInt := int(currentSlot) assert.Equal(t, currentSlotConst, currentSlotInt) }
func TestAuctionEventInit(t *testing.T) { auctionInit, blockNum, err := auctionClientTest.AuctionEventInit() require.NoError(t, err) assert.Equal(t, int64(18), blockNum) assert.Equal(t, donationAddressConst, auctionInit.DonationAddress) assert.Equal(t, bootCoordinatorAddressConst, auctionInit.BootCoordinatorAddress) assert.Equal(t, "https://boot.coordinator.io", auctionInit.BootCoordinatorURL) assert.Equal(t, uint16(1000), auctionInit.Outbidding) assert.Equal(t, uint8(20), auctionInit.SlotDeadline) assert.Equal(t, uint16(2), auctionInit.ClosedAuctionSlots) assert.Equal(t, uint16(4320), auctionInit.OpenAuctionSlots) assert.Equal(t, [3]uint16{4000, 4000, 2000}, auctionInit.AllocationRatio) }
func TestAuctionConstants(t *testing.T) { INITMINBID := new(big.Int) INITMINBID.SetString(minBidStr, 10)
auctionConstants, err := auctionClientTest.AuctionConstants() require.Nil(t, err) assert.Equal(t, auctionConstants.BlocksPerSlot, blocksPerSlot) assert.Equal(t, auctionConstants.GenesisBlockNum, genesisBlock) assert.Equal(t, auctionConstants.HermezRollup, hermezRollupTestAddressConst) assert.Equal(t, auctionConstants.InitialMinimalBidding, INITMINBID) assert.Equal(t, auctionConstants.TokenHEZ, tokenHEZAddressConst) assert.Equal(t, auctionConstants.GovernanceAddress, governanceAddressConst) }
func TestAuctionVariables(t *testing.T) { INITMINBID := new(big.Int) INITMINBID.SetString(minBidStr, 10) defaultSlotSetBid := [6]*big.Int{INITMINBID, INITMINBID, INITMINBID, INITMINBID, INITMINBID, INITMINBID}
auctionVariables, err := auctionClientTest.AuctionVariables() require.Nil(t, err) assert.Equal(t, auctionVariables.AllocationRatio, allocationRatioConst) assert.Equal(t, auctionVariables.BootCoordinator, bootCoordinatorAddressConst) assert.Equal(t, auctionVariables.ClosedAuctionSlots, closedAuctionSlotsConst) assert.Equal(t, auctionVariables.DefaultSlotSetBid, defaultSlotSetBid) assert.Equal(t, auctionVariables.DonationAddress, donationAddressConst) assert.Equal(t, auctionVariables.OpenAuctionSlots, openAuctionSlotsConst) assert.Equal(t, auctionVariables.Outbidding, outbiddingConst) assert.Equal(t, auctionVariables.SlotDeadline, slotDeadlineConst) }
func TestAuctionGetSlotDeadline(t *testing.T) { slotDeadline, err := auctionClientTest.AuctionGetSlotDeadline() require.Nil(t, err) assert.Equal(t, slotDeadlineConst, slotDeadline) }
func TestAuctionSetSlotDeadline(t *testing.T) { newSlotDeadline := uint8(25)
_, err := auctionClientTest.AuctionSetSlotDeadline(newSlotDeadline) require.Nil(t, err) slotDeadline, err := auctionClientTest.AuctionGetSlotDeadline() require.Nil(t, err) assert.Equal(t, newSlotDeadline, slotDeadline) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, newSlotDeadline, auctionEvents.NewSlotDeadline[0].NewSlotDeadline) }
func TestAuctionGetOpenAuctionSlots(t *testing.T) { openAuctionSlots, err := auctionClientTest.AuctionGetOpenAuctionSlots() require.Nil(t, err) assert.Equal(t, openAuctionSlotsConst, openAuctionSlots) }
func TestAuctionSetOpenAuctionSlots(t *testing.T) { newOpenAuctionSlots := uint16(4500)
_, err := auctionClientTest.AuctionSetOpenAuctionSlots(newOpenAuctionSlots) require.Nil(t, err) openAuctionSlots, err := auctionClientTest.AuctionGetOpenAuctionSlots() require.Nil(t, err) assert.Equal(t, newOpenAuctionSlots, openAuctionSlots) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, newOpenAuctionSlots, auctionEvents.NewOpenAuctionSlots[0].NewOpenAuctionSlots) }
func TestAuctionGetClosedAuctionSlots(t *testing.T) { closedAuctionSlots, err := auctionClientTest.AuctionGetClosedAuctionSlots() require.Nil(t, err) assert.Equal(t, closedAuctionSlotsConst, closedAuctionSlots) }
func TestAuctionSetClosedAuctionSlots(t *testing.T) { newClosedAuctionSlots := uint16(1)
_, err := auctionClientTest.AuctionSetClosedAuctionSlots(newClosedAuctionSlots) require.Nil(t, err) closedAuctionSlots, err := auctionClientTest.AuctionGetClosedAuctionSlots() require.Nil(t, err) assert.Equal(t, newClosedAuctionSlots, closedAuctionSlots) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, newClosedAuctionSlots, auctionEvents.NewClosedAuctionSlots[0].NewClosedAuctionSlots) _, err = auctionClientTest.AuctionSetClosedAuctionSlots(closedAuctionSlots) require.Nil(t, err) }
func TestAuctionGetOutbidding(t *testing.T) { outbidding, err := auctionClientTest.AuctionGetOutbidding() require.Nil(t, err) assert.Equal(t, outbiddingConst, outbidding) }
func TestAuctionSetOutbidding(t *testing.T) { newOutbidding := uint16(0xb)
_, err := auctionClientTest.AuctionSetOutbidding(newOutbidding) require.Nil(t, err) outbidding, err := auctionClientTest.AuctionGetOutbidding() require.Nil(t, err) assert.Equal(t, newOutbidding, outbidding) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, newOutbidding, auctionEvents.NewOutbidding[0].NewOutbidding) _, err = auctionClientTest.AuctionSetOutbidding(outbiddingConst) require.Nil(t, err) }
func TestAuctionGetAllocationRatio(t *testing.T) { allocationRatio, err := auctionClientTest.AuctionGetAllocationRatio() require.Nil(t, err) assert.Equal(t, allocationRatioConst, allocationRatio) }
func TestAuctionSetAllocationRatio(t *testing.T) { newAllocationRatio := [3]uint16{3000, 3000, 4000}
_, err := auctionClientTest.AuctionSetAllocationRatio(newAllocationRatio) require.Nil(t, err) allocationRatio, err := auctionClientTest.AuctionGetAllocationRatio() require.Nil(t, err) assert.Equal(t, newAllocationRatio, allocationRatio) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, newAllocationRatio, auctionEvents.NewAllocationRatio[0].NewAllocationRatio) _, err = auctionClientTest.AuctionSetAllocationRatio(allocationRatioConst) require.Nil(t, err) }
func TestAuctionGetDonationAddress(t *testing.T) { donationAddress, err := auctionClientTest.AuctionGetDonationAddress() require.Nil(t, err) assert.Equal(t, &donationAddressConst, donationAddress) }
func TestAuctionGetBootCoordinator(t *testing.T) { bootCoordinator, err := auctionClientTest.AuctionGetBootCoordinator() require.Nil(t, err) assert.Equal(t, &bootCoordinatorAddressConst, bootCoordinator) }
func TestAuctionSetDonationAddress(t *testing.T) { newDonationAddress := governanceAddressConst
_, err := auctionClientTest.AuctionSetDonationAddress(newDonationAddress) require.Nil(t, err) donationAddress, err := auctionClientTest.AuctionGetDonationAddress() require.Nil(t, err) assert.Equal(t, &newDonationAddress, donationAddress) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, newDonationAddress, auctionEvents.NewDonationAddress[0].NewDonationAddress) _, err = auctionClientTest.AuctionSetDonationAddress(donationAddressConst) require.Nil(t, err) }
func TestAuctionSetBootCoordinator(t *testing.T) { newBootCoordinator := governanceAddressConst bootCoordinatorURL := "https://boot.coordinator2.io" newBootCoordinatorURL := "https://boot.coordinator2.io"
_, err := auctionClientTest.AuctionSetBootCoordinator(newBootCoordinator, newBootCoordinatorURL) require.Nil(t, err) bootCoordinator, err := auctionClientTest.AuctionGetBootCoordinator() require.Nil(t, err) assert.Equal(t, &newBootCoordinator, bootCoordinator) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, newBootCoordinator, auctionEvents.NewBootCoordinator[0].NewBootCoordinator) assert.Equal(t, newBootCoordinatorURL, auctionEvents.NewBootCoordinator[0].NewBootCoordinatorURL) _, err = auctionClientTest.AuctionSetBootCoordinator(bootCoordinatorAddressConst, bootCoordinatorURL) require.Nil(t, err) }
func TestAuctionGetSlotSet(t *testing.T) { slot := int64(10)
slotSet, err := auctionClientTest.AuctionGetSlotSet(slot) require.Nil(t, err) assert.Equal(t, slotSet, big.NewInt(4)) }
func TestAuctionGetDefaultSlotSetBid(t *testing.T) { slotSet := uint8(3)
minBid, err := auctionClientTest.AuctionGetDefaultSlotSetBid(slotSet) require.Nil(t, err) assert.Equal(t, minBid.String(), minBidStr) }
func TestAuctionChangeDefaultSlotSetBid(t *testing.T) { slotSet := int64(3) set := uint8(3) newInitialMinBid := new(big.Int) newInitialMinBid.SetString("20000000000000000000", 10)
_, err := auctionClientTest.AuctionChangeDefaultSlotSetBid(slotSet, newInitialMinBid) require.Nil(t, err) minBid, err := auctionClientTest.AuctionGetDefaultSlotSetBid(set) require.Nil(t, err) assert.Equal(t, minBid, newInitialMinBid) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, slotSet, auctionEvents.NewDefaultSlotSetBid[0].SlotSet) assert.Equal(t, newInitialMinBid, auctionEvents.NewDefaultSlotSetBid[0].NewInitialMinBid) newMinBid := new(big.Int) newMinBid.SetString("10000000000000000000", 10) _, err = auctionClientTest.AuctionChangeDefaultSlotSetBid(slotSet, newMinBid) require.Nil(t, err) }
func TestAuctionGetClaimableHEZ(t *testing.T) { bidderAddress := governanceAddressConst
claimableHEZ, err := auctionClientTest.AuctionGetClaimableHEZ(bidderAddress) require.Nil(t, err) assert.Equal(t, claimableHEZ.Int64(), int64(0)) }
func TestAuctionRegisterCoordinator(t *testing.T) { forgerAddress := governanceAddressConst bidderAddress := governanceAddressConst
_, err := auctionClientTest.AuctionSetCoordinator(forgerAddress, URL) require.Nil(t, err) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, forgerAddress, auctionEvents.SetCoordinator[0].ForgerAddress) assert.Equal(t, bidderAddress, auctionEvents.SetCoordinator[0].BidderAddress) assert.Equal(t, URL, auctionEvents.SetCoordinator[0].CoordinatorURL) }
func TestAuctionBid(t *testing.T) { currentSlot, err := auctionClientTest.AuctionGetCurrentSlotNumber() require.Nil(t, err) bidAmount := new(big.Int) bidAmount.SetString("12000000000000000000", 10) amount := new(big.Int) amount.SetString("12000000000000000000", 10) bidderAddress := governanceAddressConst _, err = auctionClientTest.AuctionBid(amount, currentSlot+4, bidAmount, deadline) require.Nil(t, err) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, bidAmount, auctionEvents.NewBid[0].BidAmount) assert.Equal(t, bidderAddress, auctionEvents.NewBid[0].Bidder) assert.Equal(t, currentSlot+4, auctionEvents.NewBid[0].Slot) }
func TestAuctionGetSlotNumber(t *testing.T) { slotConst := 4 blockNum := int(blocksPerSlot)*slotConst + int(genesisBlock)
slot, err := auctionClientTest.AuctionGetSlotNumber(int64(blockNum)) require.Nil(t, err) assert.Equal(t, slot, int64(slotConst)) }
func TestAuctionCanForge(t *testing.T) { slotConst := 4 blockNum := int(blocksPerSlot)*slotConst + int(genesisBlock)
canForge, err := auctionClientTest.AuctionCanForge(governanceAddressConst, int64(blockNum)) require.Nil(t, err) assert.Equal(t, canForge, true) }
func TestAuctionMultiBid(t *testing.T) { currentSlot, err := auctionClientTest.AuctionGetCurrentSlotNumber() require.Nil(t, err) slotSet := [6]bool{true, false, true, false, true, false} maxBid := new(big.Int) maxBid.SetString("15000000000000000000", 10) minBid := new(big.Int) minBid.SetString("11000000000000000000", 10) budget := new(big.Int) budget.SetString("45200000000000000000", 10) bidderAddress := governanceAddressConst _, err = auctionClientTest.AuctionMultiBid(budget, currentSlot+4, currentSlot+10, slotSet, maxBid, minBid, deadline) require.Nil(t, err) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, bidderAddress, auctionEvents.NewBid[0].Bidder) assert.Equal(t, currentSlot+4, auctionEvents.NewBid[0].Slot) assert.Equal(t, bidderAddress, auctionEvents.NewBid[1].Bidder) assert.Equal(t, currentSlot+6, auctionEvents.NewBid[1].Slot) assert.Equal(t, bidderAddress, auctionEvents.NewBid[2].Bidder) assert.Equal(t, currentSlot+8, auctionEvents.NewBid[2].Slot) assert.Equal(t, bidderAddress, auctionEvents.NewBid[3].Bidder) assert.Equal(t, currentSlot+10, auctionEvents.NewBid[3].Slot) }
func TestAuctionGetClaimableHEZ2(t *testing.T) { bidderAddress := governanceAddressConst amount := new(big.Int) amount.SetString("11000000000000000000", 10)
claimableHEZ, err := auctionClientTest.AuctionGetClaimableHEZ(bidderAddress) require.Nil(t, err) assert.Equal(t, claimableHEZ, amount) }
func TestAuctionClaimHEZ(t *testing.T) { amount := new(big.Int) amount.SetString("11000000000000000000", 10)
_, err := auctionClientTest.AuctionClaimHEZ() require.Nil(t, err) currentBlockNum, err := auctionClientTest.client.EthLastBlock() require.Nil(t, err) auctionEvents, err := auctionClientTest.AuctionEventsByBlock(currentBlockNum, nil) require.Nil(t, err) assert.Equal(t, amount, auctionEvents.HEZClaimed[0].Amount) assert.Equal(t, governanceAddressConst, auctionEvents.HEZClaimed[0].Owner) }
func TestAuctionForge(t *testing.T) { auctionClientTestHermez, err := NewAuctionClient(ethereumClientHermez, auctionTestAddressConst, tokenHEZ) require.Nil(t, err) slotConst := 4 blockNum := int64(int(blocksPerSlot)*slotConst + int(genesisBlock)) currentBlockNum, err := auctionClientTestHermez.client.EthLastBlock() require.Nil(t, err) blocksToAdd := blockNum - currentBlockNum addBlocks(blocksToAdd, ethClientDialURL) currentBlockNum, err = auctionClientTestHermez.client.EthLastBlock() require.Nil(t, err) assert.Equal(t, currentBlockNum, blockNum) _, err = auctionClientTestHermez.AuctionForge(governanceAddressConst) require.Nil(t, err) }
|