Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago Fix eth events query and sync inconsistent state
- kvdb
- Fix path in Last when doing `setNew`
- Only close if db != nil, and after closing, always set db to nil
- This will avoid a panic in the case where the db is closed but
there's an error soon after, and a future call tries to close
again. This is because pebble.Close() will panic if the db is
already closed.
- Avoid calling pebble methods when a the Storage interface already
implements that method (like Close).
- statedb
- In test, avoid calling KVDB method if the same method is available for
the StateDB (like MakeCheckpoint, CurrentBatch).
- eth
- In *EventByBlock methods, take blockHash as input argument and use it
when querying the event logs. Previously the blockHash was only taken
from the logs results *only if* there was any log. This caused the
following issue: if there was no logs, it was not possible to know if
the result was from the expected block or an uncle block! By querying
logs by blockHash we make sure that even if there are no logs, they
are from the right block.
- Note that now the function can either be called with a
blockNum or blockHash, but not both at the same time.
- sync
- If there's an error during call to Sync call resetState, which
internally resets the stateDB to avoid stale checkpoints (and a
corresponding invalid increase in the StateDB batchNum).
- During a Sync, after very batch processed, make sure that the StateDB
currentBatch corresponds to the batchNum in the smart contract
log/event.
3 years ago |
|
package statedb
import ( "encoding/hex" "fmt" "io/ioutil" "math/big" "os" "strings" "testing"
ethCommon "github.com/ethereum/go-ethereum/common" ethCrypto "github.com/ethereum/go-ethereum/crypto" "github.com/hermeznetwork/hermez-node/common" "github.com/hermeznetwork/hermez-node/log" "github.com/hermeznetwork/tracerr" "github.com/iden3/go-iden3-crypto/babyjub" "github.com/iden3/go-merkletree/db" "github.com/stretchr/testify/assert" "github.com/stretchr/testify/require" )
func newAccount(t *testing.T, i int) *common.Account { var sk babyjub.PrivateKey _, err := hex.Decode(sk[:], []byte("0001020304050607080900010203040506070809000102030405060708090001")) require.NoError(t, err) pk := sk.Public()
key, err := ethCrypto.GenerateKey() require.NoError(t, err) address := ethCrypto.PubkeyToAddress(key.PublicKey)
return &common.Account{ Idx: common.Idx(256 + i), TokenID: common.TokenID(i), Nonce: common.Nonce(i), Balance: big.NewInt(1000), BJJ: pk.Compress(), EthAddr: address, } }
func TestNewStateDBIntermediateState(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
sdb, err := NewStateDB(Config{Path: dir, Keep: 128, Type: TypeTxSelector, NLevels: 0}) require.NoError(t, err)
// test values
k0 := []byte("testkey0") k1 := []byte("testkey1") v0 := []byte("testvalue0") v1 := []byte("testvalue1")
// store some data
tx, err := sdb.db.DB().NewTx() require.NoError(t, err) err = tx.Put(k0, v0) require.NoError(t, err) err = tx.Commit() require.NoError(t, err) v, err := sdb.db.DB().Get(k0) require.NoError(t, err) assert.Equal(t, v0, v)
// k0 not yet in last
err = sdb.LastRead(func(sdb *Last) error { _, err := sdb.DB().Get(k0) assert.Equal(t, db.ErrNotFound, tracerr.Unwrap(err)) return nil }) require.NoError(t, err)
// Close PebbleDB before creating a new StateDB
sdb.Close()
// call NewStateDB which should get the db at the last checkpoint state
// executing a Reset (discarding the last 'testkey0'&'testvalue0' data)
sdb, err = NewStateDB(Config{Path: dir, Keep: 128, Type: TypeTxSelector, NLevels: 0}) require.NoError(t, err) v, err = sdb.db.DB().Get(k0) assert.NotNil(t, err) assert.Equal(t, db.ErrNotFound, tracerr.Unwrap(err)) assert.Nil(t, v)
// k0 not in last
err = sdb.LastRead(func(sdb *Last) error { _, err := sdb.DB().Get(k0) assert.Equal(t, db.ErrNotFound, tracerr.Unwrap(err)) return nil }) require.NoError(t, err)
// store the same data from the beginning that has ben lost since last NewStateDB
tx, err = sdb.db.DB().NewTx() require.NoError(t, err) err = tx.Put(k0, v0) require.NoError(t, err) err = tx.Commit() require.NoError(t, err) v, err = sdb.db.DB().Get(k0) require.NoError(t, err) assert.Equal(t, v0, v)
// k0 yet not in last
err = sdb.LastRead(func(sdb *Last) error { _, err := sdb.DB().Get(k0) assert.Equal(t, db.ErrNotFound, tracerr.Unwrap(err)) return nil }) require.NoError(t, err)
// make checkpoints with the current state
bn, err := sdb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(0), bn) err = sdb.MakeCheckpoint() require.NoError(t, err) bn, err = sdb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(1), bn)
// k0 in last
err = sdb.LastRead(func(sdb *Last) error { v, err := sdb.DB().Get(k0) require.NoError(t, err) assert.Equal(t, v0, v) return nil }) require.NoError(t, err)
// write more data
tx, err = sdb.db.DB().NewTx() require.NoError(t, err) err = tx.Put(k1, v1) require.NoError(t, err) err = tx.Put(k0, v1) // overwrite k0 with v1
require.NoError(t, err) err = tx.Commit() require.NoError(t, err)
v, err = sdb.db.DB().Get(k1) require.NoError(t, err) assert.Equal(t, v1, v)
err = sdb.LastRead(func(sdb *Last) error { v, err := sdb.DB().Get(k0) require.NoError(t, err) assert.Equal(t, v0, v) return nil }) require.NoError(t, err)
// Close PebbleDB before creating a new StateDB
sdb.Close()
// call NewStateDB which should get the db at the last checkpoint state
// executing a Reset (discarding the last 'testkey1'&'testvalue1' data)
sdb, err = NewStateDB(Config{Path: dir, Keep: 128, Type: TypeTxSelector, NLevels: 0}) require.NoError(t, err)
bn, err = sdb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(1), bn)
// we closed the db without doing a checkpoint after overwriting k0, so
// it's back to v0
v, err = sdb.db.DB().Get(k0) require.NoError(t, err) assert.Equal(t, v0, v)
v, err = sdb.db.DB().Get(k1) assert.NotNil(t, err) assert.Equal(t, db.ErrNotFound, tracerr.Unwrap(err)) assert.Nil(t, v) }
func TestStateDBWithoutMT(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
sdb, err := NewStateDB(Config{Path: dir, Keep: 128, Type: TypeTxSelector, NLevels: 0}) require.NoError(t, err)
// create test accounts
var accounts []*common.Account for i := 0; i < 4; i++ { accounts = append(accounts, newAccount(t, i)) }
// get non-existing account, expecting an error
unexistingAccount := common.Idx(1) _, err = sdb.GetAccount(unexistingAccount) assert.NotNil(t, err) assert.Equal(t, db.ErrNotFound, tracerr.Unwrap(err))
// add test accounts
for i := 0; i < len(accounts); i++ { _, err = sdb.CreateAccount(accounts[i].Idx, accounts[i]) require.NoError(t, err) }
for i := 0; i < len(accounts); i++ { existingAccount := accounts[i].Idx accGetted, err := sdb.GetAccount(existingAccount) require.NoError(t, err) assert.Equal(t, accounts[i], accGetted) }
// try already existing idx and get error
existingAccount := common.Idx(256) _, err = sdb.GetAccount(existingAccount) // check that exist
require.NoError(t, err) _, err = sdb.CreateAccount(common.Idx(256), accounts[1]) // check that can not be created twice
assert.NotNil(t, err) assert.Equal(t, ErrAccountAlreadyExists, tracerr.Unwrap(err))
// update accounts
for i := 0; i < len(accounts); i++ { accounts[i].Nonce = accounts[i].Nonce + 1 existingAccount = common.Idx(i) _, err = sdb.UpdateAccount(existingAccount, accounts[i]) require.NoError(t, err) }
_, err = sdb.MTGetProof(common.Idx(1)) assert.NotNil(t, err) assert.Equal(t, ErrStateDBWithoutMT, tracerr.Unwrap(err)) }
func TestStateDBWithMT(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
sdb, err := NewStateDB(Config{Path: dir, Keep: 128, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
// create test accounts
var accounts []*common.Account for i := 0; i < 20; i++ { accounts = append(accounts, newAccount(t, i)) }
// get non-existing account, expecting an error
_, err = sdb.GetAccount(common.Idx(1)) assert.NotNil(t, err) assert.Equal(t, db.ErrNotFound, tracerr.Unwrap(err))
// add test accounts
for i := 0; i < len(accounts); i++ { _, err = sdb.CreateAccount(accounts[i].Idx, accounts[i]) require.NoError(t, err) }
for i := 0; i < len(accounts); i++ { accGetted, err := sdb.GetAccount(accounts[i].Idx) require.NoError(t, err) assert.Equal(t, accounts[i], accGetted) }
// try already existing idx and get error
_, err = sdb.GetAccount(common.Idx(256)) // check that exist
require.NoError(t, err) _, err = sdb.CreateAccount(common.Idx(256), accounts[1]) // check that can not be created twice
assert.NotNil(t, err) assert.Equal(t, ErrAccountAlreadyExists, tracerr.Unwrap(err))
_, err = sdb.MTGetProof(common.Idx(256)) require.NoError(t, err)
// update accounts
for i := 0; i < len(accounts); i++ { accounts[i].Nonce = accounts[i].Nonce + 1 _, err = sdb.UpdateAccount(accounts[i].Idx, accounts[i]) require.NoError(t, err) } a, err := sdb.GetAccount(common.Idx(256)) // check that account value has been updated
require.NoError(t, err) assert.Equal(t, accounts[0].Nonce, a.Nonce) }
// TestCheckpoints performs almost the same test than kvdb/kvdb_test.go
// TestCheckpoints, but over the StateDB
func TestCheckpoints(t *testing.T) { dir, err := ioutil.TempDir("", "sdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
sdb, err := NewStateDB(Config{Path: dir, Keep: 128, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
err = sdb.Reset(0) require.NoError(t, err)
// create test accounts
var accounts []*common.Account for i := 0; i < 10; i++ { accounts = append(accounts, newAccount(t, i)) }
// add test accounts
for i := 0; i < len(accounts); i++ { _, err = sdb.CreateAccount(accounts[i].Idx, accounts[i]) require.NoError(t, err) } // account doesn't exist in Last checkpoint
_, err = sdb.LastGetAccount(accounts[0].Idx) assert.Equal(t, db.ErrNotFound, tracerr.Unwrap(err))
// do checkpoints and check that currentBatch is correct
err = sdb.MakeCheckpoint() require.NoError(t, err) cb, err := sdb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(1), cb)
// account exists in Last checkpoint
accCur, err := sdb.GetAccount(accounts[0].Idx) require.NoError(t, err) accLast, err := sdb.LastGetAccount(accounts[0].Idx) require.NoError(t, err) assert.Equal(t, accounts[0], accLast) assert.Equal(t, accCur, accLast)
for i := 1; i < 10; i++ { err = sdb.MakeCheckpoint() require.NoError(t, err)
cb, err = sdb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(i+1), cb) }
// printCheckpoints(t, sdb.cfg.Path)
// reset checkpoint
err = sdb.Reset(3) require.NoError(t, err)
// check that reset can be repeated (as there exist the 'current' and
// 'BatchNum3', from where the 'current' is a copy)
err = sdb.Reset(3) require.NoError(t, err)
// check that currentBatch is as expected after Reset
cb, err = sdb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(3), cb)
// advance one checkpoint and check that currentBatch is fine
err = sdb.MakeCheckpoint() require.NoError(t, err) cb, err = sdb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(4), cb)
err = sdb.db.DeleteCheckpoint(common.BatchNum(1)) require.NoError(t, err) err = sdb.db.DeleteCheckpoint(common.BatchNum(2)) require.NoError(t, err) err = sdb.db.DeleteCheckpoint(common.BatchNum(1)) // does not exist, should return err
assert.NotNil(t, err) err = sdb.db.DeleteCheckpoint(common.BatchNum(2)) // does not exist, should return err
assert.NotNil(t, err)
// Create a LocalStateDB from the initial StateDB
dirLocal, err := ioutil.TempDir("", "ldb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dirLocal)) ldb, err := NewLocalStateDB(Config{Path: dirLocal, Keep: 128, Type: TypeBatchBuilder, NLevels: 32}, sdb) require.NoError(t, err)
// get checkpoint 4 from sdb (StateDB) to ldb (LocalStateDB)
err = ldb.Reset(4, true) require.NoError(t, err) // check that currentBatch is 4 after the Reset
cb, err = ldb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(4), cb) // advance one checkpoint in ldb
err = ldb.MakeCheckpoint() require.NoError(t, err) cb, err = ldb.getCurrentBatch() require.NoError(t, err) assert.Equal(t, common.BatchNum(5), cb)
// Create a 2nd LocalStateDB from the initial StateDB
dirLocal2, err := ioutil.TempDir("", "ldb2") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dirLocal2)) ldb2, err := NewLocalStateDB(Config{Path: dirLocal2, Keep: 128, Type: TypeBatchBuilder, NLevels: 32}, sdb) require.NoError(t, err)
// get checkpoint 4 from sdb (StateDB) to ldb (LocalStateDB)
err = ldb2.Reset(4, true) require.NoError(t, err) // check that currentBatch is 4 after the Reset
cb = ldb2.CurrentBatch() assert.Equal(t, common.BatchNum(4), cb) // advance one checkpoint in ldb2
err = ldb2.MakeCheckpoint() require.NoError(t, err) cb = ldb2.CurrentBatch() assert.Equal(t, common.BatchNum(5), cb)
debug := false if debug { printCheckpoints(t, sdb.cfg.Path) printCheckpoints(t, ldb.cfg.Path) printCheckpoints(t, ldb2.cfg.Path) } }
func TestStateDBGetAccounts(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err)
sdb, err := NewStateDB(Config{Path: dir, Keep: 128, Type: TypeTxSelector, NLevels: 0}) require.NoError(t, err)
// create test accounts
var accounts []common.Account for i := 0; i < 16; i++ { account := newAccount(t, i) accounts = append(accounts, *account) }
// add test accounts
for i := range accounts { _, err = sdb.CreateAccount(accounts[i].Idx, &accounts[i]) require.NoError(t, err) }
dbAccounts, err := sdb.TestGetAccounts() require.NoError(t, err) assert.Equal(t, accounts, dbAccounts) }
func printCheckpoints(t *testing.T, path string) { files, err := ioutil.ReadDir(path) require.NoError(t, err)
fmt.Println(path) for _, f := range files { fmt.Println(" " + f.Name()) } }
func bigFromStr(h string, u int) *big.Int { if u == 16 { h = strings.TrimPrefix(h, "0x") } b, ok := new(big.Int).SetString(h, u) if !ok { panic("bigFromStr err") } return b }
func TestCheckAccountsTreeTestVectors(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
sdb, err := NewStateDB(Config{Path: dir, Keep: 128, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
ay0 := new(big.Int).Sub(new(big.Int).Exp(big.NewInt(2), big.NewInt(253), nil), big.NewInt(1)) // test value from js version (compatibility-canary)
assert.Equal(t, "1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff", (hex.EncodeToString(ay0.Bytes()))) bjjPoint0Comp := babyjub.PackSignY(true, ay0) bjj0 := babyjub.PublicKeyComp(bjjPoint0Comp)
ay1 := bigFromStr("00", 16) bjjPoint1Comp := babyjub.PackSignY(false, ay1) bjj1 := babyjub.PublicKeyComp(bjjPoint1Comp) ay2 := bigFromStr("21b0a1688b37f77b1d1d5539ec3b826db5ac78b2513f574a04c50a7d4f8246d7", 16) bjjPoint2Comp := babyjub.PackSignY(false, ay2) bjj2 := babyjub.PublicKeyComp(bjjPoint2Comp)
ay3 := bigFromStr("0x10", 16) // 0x10=16
bjjPoint3Comp := babyjub.PackSignY(false, ay3) require.NoError(t, err) bjj3 := babyjub.PublicKeyComp(bjjPoint3Comp) accounts := []*common.Account{ { Idx: 1, TokenID: 0xFFFFFFFF, BJJ: bjj0, EthAddr: ethCommon.HexToAddress("0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"), Nonce: common.Nonce(0xFFFFFFFFFF), Balance: bigFromStr("FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF", 16), }, { Idx: 100, TokenID: 0, BJJ: bjj1, EthAddr: ethCommon.HexToAddress("0x00"), Nonce: common.Nonce(0), Balance: bigFromStr("0", 10), }, { Idx: 0xFFFFFFFFFFFF, TokenID: 3, BJJ: bjj2, EthAddr: ethCommon.HexToAddress("0xA3C88ac39A76789437AED31B9608da72e1bbfBF9"), Nonce: common.Nonce(129), Balance: bigFromStr("42000000000000000000", 10), }, { Idx: 10000, TokenID: 1000, BJJ: bjj3, EthAddr: ethCommon.HexToAddress("0x64"), Nonce: common.Nonce(1900), Balance: bigFromStr("14000000000000000000", 10), }, } for i := 0; i < len(accounts); i++ { _, err = accounts[i].HashValue() require.NoError(t, err) _, err = sdb.CreateAccount(accounts[i].Idx, accounts[i]) if err != nil { log.Error(err) } require.NoError(t, err) } // root value generated by js version:
assert.Equal(t, "17298264051379321456969039521810887093935433569451713402227686942080129181291", sdb.MT.Root().BigInt().String()) }
// TestListCheckpoints performs almost the same test than kvdb/kvdb_test.go
// TestListCheckpoints, but over the StateDB
func TestListCheckpoints(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
sdb, err := NewStateDB(Config{Path: dir, Keep: 128, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
numCheckpoints := 16 // do checkpoints
for i := 0; i < numCheckpoints; i++ { err = sdb.MakeCheckpoint() require.NoError(t, err) } list, err := sdb.db.ListCheckpoints() require.NoError(t, err) assert.Equal(t, numCheckpoints, len(list)) assert.Equal(t, 1, list[0]) assert.Equal(t, numCheckpoints, list[len(list)-1])
numReset := 10 err = sdb.Reset(common.BatchNum(numReset)) require.NoError(t, err) list, err = sdb.db.ListCheckpoints() require.NoError(t, err) assert.Equal(t, numReset, len(list)) assert.Equal(t, 1, list[0]) assert.Equal(t, numReset, list[len(list)-1]) }
// TestDeleteOldCheckpoints performs almost the same test than
// kvdb/kvdb_test.go TestDeleteOldCheckpoints, but over the StateDB
func TestDeleteOldCheckpoints(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
keep := 16 sdb, err := NewStateDB(Config{Path: dir, Keep: keep, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
numCheckpoints := 32 // do checkpoints and check that we never have more than `keep`
// checkpoints
for i := 0; i < numCheckpoints; i++ { err = sdb.MakeCheckpoint() require.NoError(t, err) checkpoints, err := sdb.db.ListCheckpoints() require.NoError(t, err) assert.LessOrEqual(t, len(checkpoints), keep) } }
func TestCurrentIdx(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
keep := 16 sdb, err := NewStateDB(Config{Path: dir, Keep: keep, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
idx := sdb.CurrentIdx() assert.Equal(t, common.Idx(255), idx)
sdb.Close()
sdb, err = NewStateDB(Config{Path: dir, Keep: keep, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
idx = sdb.CurrentIdx() assert.Equal(t, common.Idx(255), idx)
err = sdb.MakeCheckpoint() require.NoError(t, err)
idx = sdb.CurrentIdx() assert.Equal(t, common.Idx(255), idx)
sdb.Close()
sdb, err = NewStateDB(Config{Path: dir, Keep: keep, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
idx = sdb.CurrentIdx() assert.Equal(t, common.Idx(255), idx) }
func TestResetFromBadCheckpoint(t *testing.T) { dir, err := ioutil.TempDir("", "tmpdb") require.NoError(t, err) defer require.NoError(t, os.RemoveAll(dir))
keep := 16 sdb, err := NewStateDB(Config{Path: dir, Keep: keep, Type: TypeSynchronizer, NLevels: 32}) require.NoError(t, err)
err = sdb.MakeCheckpoint() require.NoError(t, err) err = sdb.MakeCheckpoint() require.NoError(t, err) err = sdb.MakeCheckpoint() require.NoError(t, err)
// reset from a checkpoint that doesn't exist
err = sdb.Reset(10) require.Error(t, err) }
|