You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

620 lines
20 KiB

Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
Update coordinator to work better under real net - cli / node - Update handler of SIGINT so that after 3 SIGINTs, the process terminates unconditionally - coordinator - Store stats without pointer - In all functions that send a variable via channel, check for context done to avoid deadlock (due to no process reading from the channel, which has no queue) when the node is stopped. - Abstract `canForge` so that it can be used outside of the `Coordinator` - In `canForge` check the blockNumber in current and next slot. - Update tests due to smart contract changes in slot handling, and minimum bid defaults - TxManager - Add consts, vars and stats to allow evaluating `canForge` - Add `canForge` method (not used yet) - Store batch and nonces status (last success and last pending) - Track nonces internally instead of relying on the ethereum node (this is required to work with ganache when there are pending txs) - Handle the (common) case of the receipt not being found after the tx is sent. - Don't start the main loop until we get an initial messae fo the stats and vars (so that in the loop the stats and vars are set to synchronizer values) - When a tx fails, check and discard all the failed transactions before sending the message to stop the pipeline. This will avoid sending consecutive messages of stop the pipeline when multiple txs are detected to be failed consecutively. Also, future txs of the same pipeline after a discarded txs are discarded, and their nonces reused. - Robust handling of nonces: - If geth returns nonce is too low, increase it - If geth returns nonce too hight, decrease it - If geth returns underpriced, increase gas price - If geth returns replace underpriced, increase gas price - Add support for resending transactions after a timeout - Store `BatchInfos` in a queue - Pipeline - When an error is found, stop forging batches and send a message to the coordinator to stop the pipeline with information of the failed batch number so that in a restart, non-failed batches are not repated. - When doing a reset of the stateDB, if possible reset from the local checkpoint instead of resetting from the synchronizer. This allows resetting from a batch that is valid but not yet sent / synced. - Every time a pipeline is started, assign it a number from a counter. This allows the TxManager to ignore batches from stopped pipelines, via a message sent by the coordinator. - Avoid forging when we haven't reached the rollup genesis block number. - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the number of blocks of delay to wait before starting the pipeline when we reach a slot in which we can forge. - When detecting a reorg, only reset the pipeline if the batch from which the pipeline started changed and wasn't sent by us. - Add config parameter `ScheduleBatchBlocksAheadCheck`: ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the forger address is checked to be allowed to forge (apart from checking the next block), used to decide when to stop scheduling new batches (by stopping the pipeline). For example, if we are at block 10 and ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge, the pipeline will be stopped if we can't forge at block 15. This value should be the expected number of blocks it takes between scheduling a batch and having it mined. - Add config parameter `SendBatchBlocksMarginCheck`: SendBatchBlocksMarginCheck is the number of margin blocks ahead in which the coordinator is also checked to be allowed to forge, apart from the next block; used to decide when to stop sending batches to the smart contract. For example, if we are at block 10 and SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the batch will be discarded if we can't forge at block 15. - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout after which a non-mined ethereum transaction will be resent (reusing the nonce) with a newly calculated gas price - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price allowed for ethereum transactions - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces of pending transactions for new replacement transactions. This is useful for testing with Ganache. - Extend BatchInfo with more useful information for debugging - eth / ethereum client - Add necessary methods to create the auth object for transactions manually so that we can set the nonce, gas price, gas limit, etc manually - Update `RollupForgeBatch` to take an auth object as input (so that the coordinator can set parameters manually) - synchronizer - In stats, add `NextSlot` - In stats, store full last batch instead of just last batch number - Instead of calculating a nextSlot from scratch every time, update the current struct (only updating the forger info if we are Synced) - Afer every processed batch, check that the calculated StateDB MTRoot matches the StateRoot found in the forgeBatch event.
3 years ago
  1. package coordinator
  2. import (
  3. "context"
  4. "fmt"
  5. "math/big"
  6. "strings"
  7. "time"
  8. "github.com/ethereum/go-ethereum"
  9. "github.com/ethereum/go-ethereum/accounts"
  10. "github.com/ethereum/go-ethereum/accounts/abi/bind"
  11. "github.com/ethereum/go-ethereum/core"
  12. "github.com/ethereum/go-ethereum/core/types"
  13. "github.com/hermeznetwork/hermez-node/common"
  14. "github.com/hermeznetwork/hermez-node/db/l2db"
  15. "github.com/hermeznetwork/hermez-node/eth"
  16. "github.com/hermeznetwork/hermez-node/log"
  17. "github.com/hermeznetwork/hermez-node/synchronizer"
  18. "github.com/hermeznetwork/tracerr"
  19. )
  20. // TxManager handles everything related to ethereum transactions: It makes the
  21. // call to forge, waits for transaction confirmation, and keeps checking them
  22. // until a number of confirmed blocks have passed.
  23. type TxManager struct {
  24. cfg Config
  25. ethClient eth.ClientInterface
  26. l2DB *l2db.L2DB // Used only to mark forged txs as forged in the L2DB
  27. coord *Coordinator // Used only to send messages to stop the pipeline
  28. batchCh chan *BatchInfo
  29. chainID *big.Int
  30. account accounts.Account
  31. consts synchronizer.SCConsts
  32. stats synchronizer.Stats
  33. vars synchronizer.SCVariables
  34. statsVarsCh chan statsVars
  35. discardPipelineCh chan int // int refers to the pipelineNum
  36. minPipelineNum int
  37. queue Queue
  38. // lastSuccessBatch stores the last BatchNum that who's forge call was confirmed
  39. lastSuccessBatch common.BatchNum
  40. // lastPendingBatch common.BatchNum
  41. // accNonce is the account nonce in the last mined block (due to mined txs)
  42. accNonce uint64
  43. // accNextNonce is the nonce that we should use to send the next tx.
  44. // In some cases this will be a reused nonce of an already pending tx.
  45. accNextNonce uint64
  46. lastSentL1BatchBlockNum int64
  47. }
  48. // NewTxManager creates a new TxManager
  49. func NewTxManager(ctx context.Context, cfg *Config, ethClient eth.ClientInterface, l2DB *l2db.L2DB,
  50. coord *Coordinator, scConsts *synchronizer.SCConsts, initSCVars *synchronizer.SCVariables) (
  51. *TxManager, error) {
  52. chainID, err := ethClient.EthChainID()
  53. if err != nil {
  54. return nil, tracerr.Wrap(err)
  55. }
  56. address, err := ethClient.EthAddress()
  57. if err != nil {
  58. return nil, tracerr.Wrap(err)
  59. }
  60. accNonce, err := ethClient.EthNonceAt(ctx, *address, nil)
  61. if err != nil {
  62. return nil, tracerr.Wrap(err)
  63. }
  64. log.Infow("TxManager started", "nonce", accNonce)
  65. return &TxManager{
  66. cfg: *cfg,
  67. ethClient: ethClient,
  68. l2DB: l2DB,
  69. coord: coord,
  70. batchCh: make(chan *BatchInfo, queueLen),
  71. statsVarsCh: make(chan statsVars, queueLen),
  72. discardPipelineCh: make(chan int, queueLen),
  73. account: accounts.Account{
  74. Address: *address,
  75. },
  76. chainID: chainID,
  77. consts: *scConsts,
  78. vars: *initSCVars,
  79. minPipelineNum: 0,
  80. queue: NewQueue(),
  81. accNonce: accNonce,
  82. accNextNonce: accNonce,
  83. }, nil
  84. }
  85. // AddBatch is a thread safe method to pass a new batch TxManager to be sent to
  86. // the smart contract via the forge call
  87. func (t *TxManager) AddBatch(ctx context.Context, batchInfo *BatchInfo) {
  88. select {
  89. case t.batchCh <- batchInfo:
  90. case <-ctx.Done():
  91. }
  92. }
  93. // SetSyncStatsVars is a thread safe method to sets the synchronizer Stats
  94. func (t *TxManager) SetSyncStatsVars(ctx context.Context, stats *synchronizer.Stats,
  95. vars *synchronizer.SCVariablesPtr) {
  96. select {
  97. case t.statsVarsCh <- statsVars{Stats: *stats, Vars: *vars}:
  98. case <-ctx.Done():
  99. }
  100. }
  101. // DiscardPipeline is a thread safe method to notify about a discarded pipeline
  102. // due to a reorg
  103. func (t *TxManager) DiscardPipeline(ctx context.Context, pipelineNum int) {
  104. select {
  105. case t.discardPipelineCh <- pipelineNum:
  106. case <-ctx.Done():
  107. }
  108. }
  109. func (t *TxManager) syncSCVars(vars synchronizer.SCVariablesPtr) {
  110. updateSCVars(&t.vars, vars)
  111. }
  112. // NewAuth generates a new auth object for an ethereum transaction
  113. func (t *TxManager) NewAuth(ctx context.Context, batchInfo *BatchInfo) (*bind.TransactOpts, error) {
  114. gasPrice, err := t.ethClient.EthSuggestGasPrice(ctx)
  115. if err != nil {
  116. return nil, tracerr.Wrap(err)
  117. }
  118. if t.cfg.GasPriceIncPerc != 0 {
  119. inc := new(big.Int).Set(gasPrice)
  120. inc.Mul(inc, new(big.Int).SetInt64(t.cfg.GasPriceIncPerc))
  121. // nolint reason: to calculate percentages we use 100
  122. inc.Div(inc, new(big.Int).SetUint64(100)) //nolint:gomnd
  123. gasPrice.Add(gasPrice, inc)
  124. }
  125. // log.Debugw("TxManager: transaction metadata", "gasPrice", gasPrice)
  126. auth, err := bind.NewKeyStoreTransactorWithChainID(t.ethClient.EthKeyStore(), t.account, t.chainID)
  127. if err != nil {
  128. return nil, tracerr.Wrap(err)
  129. }
  130. auth.Value = big.NewInt(0) // in wei
  131. gasLimit := t.cfg.ForgeBatchGasCost.Fixed +
  132. uint64(len(batchInfo.L1UserTxsExtra))*t.cfg.ForgeBatchGasCost.L1UserTx +
  133. uint64(len(batchInfo.L1CoordTxs))*t.cfg.ForgeBatchGasCost.L1CoordTx +
  134. uint64(len(batchInfo.L2Txs))*t.cfg.ForgeBatchGasCost.L2Tx
  135. auth.GasLimit = gasLimit
  136. auth.GasPrice = gasPrice
  137. auth.Nonce = nil
  138. return auth, nil
  139. }
  140. func (t *TxManager) shouldSendRollupForgeBatch(batchInfo *BatchInfo) error {
  141. nextBlock := t.stats.Eth.LastBlock.Num + 1
  142. if !t.canForgeAt(nextBlock) {
  143. return tracerr.Wrap(fmt.Errorf("can't forge in the next block: %v", nextBlock))
  144. }
  145. if t.mustL1L2Batch(nextBlock) && !batchInfo.L1Batch {
  146. return tracerr.Wrap(fmt.Errorf("can't forge non-L1Batch in the next block: %v", nextBlock))
  147. }
  148. margin := t.cfg.SendBatchBlocksMarginCheck
  149. if margin != 0 {
  150. if !t.canForgeAt(nextBlock + margin) {
  151. return tracerr.Wrap(fmt.Errorf("can't forge after %v blocks: %v",
  152. margin, nextBlock))
  153. }
  154. if t.mustL1L2Batch(nextBlock+margin) && !batchInfo.L1Batch {
  155. return tracerr.Wrap(fmt.Errorf("can't forge non-L1Batch after %v blocks: %v",
  156. margin, nextBlock))
  157. }
  158. }
  159. return nil
  160. }
  161. func addPerc(v *big.Int, p int64) *big.Int {
  162. r := new(big.Int).Set(v)
  163. r.Mul(r, big.NewInt(p))
  164. // nolint reason: to calculate percentages we divide by 100
  165. r.Div(r, big.NewInt(100)) //nolit:gomnd
  166. // If the increase is 0, force it to be 1 so that a gas increase
  167. // doesn't result in the same value, making the transaction to be equal
  168. // than before.
  169. if r.Cmp(big.NewInt(0)) == 0 {
  170. r = big.NewInt(1)
  171. }
  172. return r.Add(v, r)
  173. }
  174. func (t *TxManager) sendRollupForgeBatch(ctx context.Context, batchInfo *BatchInfo,
  175. resend bool) error {
  176. var ethTx *types.Transaction
  177. var err error
  178. var auth *bind.TransactOpts
  179. if resend {
  180. auth = batchInfo.Auth
  181. auth.GasPrice = addPerc(auth.GasPrice, 10)
  182. } else {
  183. auth, err = t.NewAuth(ctx, batchInfo)
  184. if err != nil {
  185. return tracerr.Wrap(err)
  186. }
  187. batchInfo.Auth = auth
  188. auth.Nonce = big.NewInt(int64(t.accNextNonce))
  189. }
  190. for attempt := 0; attempt < t.cfg.EthClientAttempts; attempt++ {
  191. if auth.GasPrice.Cmp(t.cfg.MaxGasPrice) > 0 {
  192. return tracerr.Wrap(fmt.Errorf("calculated gasPrice (%v) > maxGasPrice (%v)",
  193. auth.GasPrice, t.cfg.MaxGasPrice))
  194. }
  195. // RollupForgeBatch() calls ethclient.SendTransaction()
  196. ethTx, err = t.ethClient.RollupForgeBatch(batchInfo.ForgeBatchArgs, auth)
  197. // We check the errors via strings because we match the
  198. // definition of the error from geth, with the string returned
  199. // via RPC obtained by the client.
  200. if err == nil {
  201. break
  202. } else if strings.Contains(err.Error(), core.ErrNonceTooLow.Error()) {
  203. log.Warnw("TxManager ethClient.RollupForgeBatch incrementing nonce",
  204. "err", err, "nonce", auth.Nonce, "batchNum", batchInfo.BatchNum)
  205. auth.Nonce.Add(auth.Nonce, big.NewInt(1))
  206. attempt--
  207. } else if strings.Contains(err.Error(), core.ErrNonceTooHigh.Error()) {
  208. log.Warnw("TxManager ethClient.RollupForgeBatch decrementing nonce",
  209. "err", err, "nonce", auth.Nonce, "batchNum", batchInfo.BatchNum)
  210. auth.Nonce.Sub(auth.Nonce, big.NewInt(1))
  211. attempt--
  212. } else if strings.Contains(err.Error(), core.ErrReplaceUnderpriced.Error()) {
  213. log.Warnw("TxManager ethClient.RollupForgeBatch incrementing gasPrice",
  214. "err", err, "gasPrice", auth.GasPrice, "batchNum", batchInfo.BatchNum)
  215. auth.GasPrice = addPerc(auth.GasPrice, 10)
  216. attempt--
  217. } else if strings.Contains(err.Error(), core.ErrUnderpriced.Error()) {
  218. log.Warnw("TxManager ethClient.RollupForgeBatch incrementing gasPrice",
  219. "err", err, "gasPrice", auth.GasPrice, "batchNum", batchInfo.BatchNum)
  220. auth.GasPrice = addPerc(auth.GasPrice, 10)
  221. attempt--
  222. } else {
  223. log.Errorw("TxManager ethClient.RollupForgeBatch",
  224. "attempt", attempt, "err", err, "block", t.stats.Eth.LastBlock.Num+1,
  225. "batchNum", batchInfo.BatchNum)
  226. }
  227. select {
  228. case <-ctx.Done():
  229. return tracerr.Wrap(common.ErrDone)
  230. case <-time.After(t.cfg.EthClientAttemptsDelay):
  231. }
  232. }
  233. if err != nil {
  234. return tracerr.Wrap(fmt.Errorf("reached max attempts for ethClient.RollupForgeBatch: %w", err))
  235. }
  236. if !resend {
  237. t.accNextNonce = auth.Nonce.Uint64() + 1
  238. }
  239. batchInfo.EthTx = ethTx
  240. log.Infow("TxManager ethClient.RollupForgeBatch", "batch", batchInfo.BatchNum, "tx", ethTx.Hash())
  241. now := time.Now()
  242. batchInfo.SendTimestamp = now
  243. if resend {
  244. batchInfo.Debug.ResendNum++
  245. }
  246. batchInfo.Debug.Status = StatusSent
  247. batchInfo.Debug.SendBlockNum = t.stats.Eth.LastBlock.Num + 1
  248. batchInfo.Debug.SendTimestamp = batchInfo.SendTimestamp
  249. batchInfo.Debug.StartToSendDelay = batchInfo.Debug.SendTimestamp.Sub(
  250. batchInfo.Debug.StartTimestamp).Seconds()
  251. t.cfg.debugBatchStore(batchInfo)
  252. if !resend {
  253. if batchInfo.L1Batch {
  254. t.lastSentL1BatchBlockNum = t.stats.Eth.LastBlock.Num + 1
  255. }
  256. }
  257. if err := t.l2DB.DoneForging(common.TxIDsFromL2Txs(batchInfo.L2Txs),
  258. batchInfo.BatchNum); err != nil {
  259. return tracerr.Wrap(err)
  260. }
  261. return nil
  262. }
  263. // checkEthTransactionReceipt takes the txHash from the BatchInfo and stores
  264. // the corresponding receipt if found
  265. func (t *TxManager) checkEthTransactionReceipt(ctx context.Context, batchInfo *BatchInfo) error {
  266. txHash := batchInfo.EthTx.Hash()
  267. var receipt *types.Receipt
  268. var err error
  269. for attempt := 0; attempt < t.cfg.EthClientAttempts; attempt++ {
  270. receipt, err = t.ethClient.EthTransactionReceipt(ctx, txHash)
  271. if ctx.Err() != nil {
  272. continue
  273. } else if tracerr.Unwrap(err) == ethereum.NotFound {
  274. err = nil
  275. break
  276. } else if err != nil {
  277. log.Errorw("TxManager ethClient.EthTransactionReceipt",
  278. "attempt", attempt, "err", err)
  279. } else {
  280. break
  281. }
  282. select {
  283. case <-ctx.Done():
  284. return tracerr.Wrap(common.ErrDone)
  285. case <-time.After(t.cfg.EthClientAttemptsDelay):
  286. }
  287. }
  288. if err != nil {
  289. return tracerr.Wrap(
  290. fmt.Errorf("reached max attempts for ethClient.EthTransactionReceipt: %w",
  291. err))
  292. }
  293. batchInfo.Receipt = receipt
  294. t.cfg.debugBatchStore(batchInfo)
  295. return nil
  296. }
  297. func (t *TxManager) handleReceipt(ctx context.Context, batchInfo *BatchInfo) (*int64, error) {
  298. receipt := batchInfo.Receipt
  299. if receipt != nil {
  300. if batchInfo.EthTx.Nonce()+1 > t.accNonce {
  301. t.accNonce = batchInfo.EthTx.Nonce() + 1
  302. }
  303. if receipt.Status == types.ReceiptStatusFailed {
  304. batchInfo.Debug.Status = StatusFailed
  305. _, err := t.ethClient.EthCall(ctx, batchInfo.EthTx, receipt.BlockNumber)
  306. log.Warnw("TxManager receipt status is failed", "tx", receipt.TxHash,
  307. "batch", batchInfo.BatchNum, "block", receipt.BlockNumber.Int64(),
  308. "err", err)
  309. batchInfo.EthTxErr = err
  310. if batchInfo.BatchNum <= t.lastSuccessBatch {
  311. t.lastSuccessBatch = batchInfo.BatchNum - 1
  312. }
  313. t.cfg.debugBatchStore(batchInfo)
  314. return nil, tracerr.Wrap(fmt.Errorf(
  315. "ethereum transaction receipt status is failed: %w", err))
  316. } else if receipt.Status == types.ReceiptStatusSuccessful {
  317. batchInfo.Debug.Status = StatusMined
  318. batchInfo.Debug.MineBlockNum = receipt.BlockNumber.Int64()
  319. batchInfo.Debug.StartToMineBlocksDelay = batchInfo.Debug.MineBlockNum -
  320. batchInfo.Debug.StartBlockNum
  321. if batchInfo.Debug.StartToMineDelay == 0 {
  322. if block, err := t.ethClient.EthBlockByNumber(ctx,
  323. receipt.BlockNumber.Int64()); err != nil {
  324. log.Warnw("TxManager: ethClient.EthBlockByNumber", "err", err)
  325. } else {
  326. batchInfo.Debug.SendToMineDelay = block.Timestamp.Sub(
  327. batchInfo.Debug.SendTimestamp).Seconds()
  328. batchInfo.Debug.StartToMineDelay = block.Timestamp.Sub(
  329. batchInfo.Debug.StartTimestamp).Seconds()
  330. }
  331. }
  332. t.cfg.debugBatchStore(batchInfo)
  333. if batchInfo.BatchNum > t.lastSuccessBatch {
  334. t.lastSuccessBatch = batchInfo.BatchNum
  335. }
  336. confirm := t.stats.Eth.LastBlock.Num - receipt.BlockNumber.Int64()
  337. return &confirm, nil
  338. }
  339. }
  340. return nil, nil
  341. }
  342. // TODO:
  343. // - After sending a message: CancelPipeline, stop all consecutive pending Batches (transactions)
  344. // Queue of BatchInfos
  345. type Queue struct {
  346. list []*BatchInfo
  347. // nonceByBatchNum map[common.BatchNum]uint64
  348. next int
  349. }
  350. // NewQueue returns a new queue
  351. func NewQueue() Queue {
  352. return Queue{
  353. list: make([]*BatchInfo, 0),
  354. // nonceByBatchNum: make(map[common.BatchNum]uint64),
  355. next: 0,
  356. }
  357. }
  358. // Len is the length of the queue
  359. func (q *Queue) Len() int {
  360. return len(q.list)
  361. }
  362. // At returns the BatchInfo at position (or nil if position is out of bounds)
  363. func (q *Queue) At(position int) *BatchInfo {
  364. if position >= len(q.list) {
  365. return nil
  366. }
  367. return q.list[position]
  368. }
  369. // Next returns the next BatchInfo (or nil if queue is empty)
  370. func (q *Queue) Next() (int, *BatchInfo) {
  371. if len(q.list) == 0 {
  372. return 0, nil
  373. }
  374. defer func() { q.next = (q.next + 1) % len(q.list) }()
  375. return q.next, q.list[q.next]
  376. }
  377. // Remove removes the BatchInfo at position
  378. func (q *Queue) Remove(position int) {
  379. // batchInfo := q.list[position]
  380. // delete(q.nonceByBatchNum, batchInfo.BatchNum)
  381. q.list = append(q.list[:position], q.list[position+1:]...)
  382. if len(q.list) == 0 {
  383. q.next = 0
  384. } else {
  385. q.next = position % len(q.list)
  386. }
  387. }
  388. // Push adds a new BatchInfo
  389. func (q *Queue) Push(batchInfo *BatchInfo) {
  390. q.list = append(q.list, batchInfo)
  391. // q.nonceByBatchNum[batchInfo.BatchNum] = batchInfo.EthTx.Nonce()
  392. }
  393. // func (q *Queue) NonceByBatchNum(batchNum common.BatchNum) (uint64, bool) {
  394. // nonce, ok := q.nonceByBatchNum[batchNum]
  395. // return nonce, ok
  396. // }
  397. // Run the TxManager
  398. func (t *TxManager) Run(ctx context.Context) {
  399. var statsVars statsVars
  400. select {
  401. case statsVars = <-t.statsVarsCh:
  402. case <-ctx.Done():
  403. }
  404. t.stats = statsVars.Stats
  405. t.syncSCVars(statsVars.Vars)
  406. log.Infow("TxManager: received initial statsVars",
  407. "block", t.stats.Eth.LastBlock.Num, "batch", t.stats.Eth.LastBatchNum)
  408. timer := time.NewTimer(longWaitDuration)
  409. for {
  410. select {
  411. case <-ctx.Done():
  412. log.Info("TxManager done")
  413. return
  414. case statsVars := <-t.statsVarsCh:
  415. t.stats = statsVars.Stats
  416. t.syncSCVars(statsVars.Vars)
  417. case pipelineNum := <-t.discardPipelineCh:
  418. t.minPipelineNum = pipelineNum + 1
  419. if err := t.removeBadBatchInfos(ctx); ctx.Err() != nil {
  420. continue
  421. } else if err != nil {
  422. log.Errorw("TxManager: removeBadBatchInfos", "err", err)
  423. continue
  424. }
  425. case batchInfo := <-t.batchCh:
  426. if batchInfo.PipelineNum < t.minPipelineNum {
  427. log.Warnw("TxManager: batchInfo received pipelineNum < minPipelineNum",
  428. "num", batchInfo.PipelineNum, "minNum", t.minPipelineNum)
  429. }
  430. if err := t.shouldSendRollupForgeBatch(batchInfo); err != nil {
  431. log.Warnw("TxManager: shouldSend", "err", err,
  432. "batch", batchInfo.BatchNum)
  433. t.coord.SendMsg(ctx, MsgStopPipeline{
  434. Reason: fmt.Sprintf("forgeBatch shouldSend: %v", err)})
  435. continue
  436. }
  437. if err := t.sendRollupForgeBatch(ctx, batchInfo, false); ctx.Err() != nil {
  438. continue
  439. } else if err != nil {
  440. // If we reach here it's because our ethNode has
  441. // been unable to send the transaction to
  442. // ethereum. This could be due to the ethNode
  443. // failure, or an invalid transaction (that
  444. // can't be mined)
  445. log.Warnw("TxManager: forgeBatch send failed", "err", err,
  446. "batch", batchInfo.BatchNum)
  447. t.coord.SendMsg(ctx, MsgStopPipeline{
  448. Reason: fmt.Sprintf("forgeBatch send: %v", err)})
  449. continue
  450. }
  451. t.queue.Push(batchInfo)
  452. if !timer.Stop() {
  453. <-timer.C
  454. }
  455. timer.Reset(t.cfg.TxManagerCheckInterval)
  456. case <-timer.C:
  457. queuePosition, batchInfo := t.queue.Next()
  458. if batchInfo == nil {
  459. timer.Reset(longWaitDuration)
  460. continue
  461. }
  462. timer.Reset(t.cfg.TxManagerCheckInterval)
  463. if err := t.checkEthTransactionReceipt(ctx, batchInfo); ctx.Err() != nil {
  464. continue
  465. } else if err != nil { //nolint:staticcheck
  466. // Our ethNode is giving an error different
  467. // than "not found" when getting the receipt
  468. // for the transaction, so we can't figure out
  469. // if it was not mined, mined and successful or
  470. // mined and failed. This could be due to the
  471. // ethNode failure.
  472. t.coord.SendMsg(ctx, MsgStopPipeline{
  473. Reason: fmt.Sprintf("forgeBatch receipt: %v", err)})
  474. }
  475. confirm, err := t.handleReceipt(ctx, batchInfo)
  476. if ctx.Err() != nil {
  477. continue
  478. } else if err != nil { //nolint:staticcheck
  479. // Transaction was rejected
  480. if err := t.removeBadBatchInfos(ctx); ctx.Err() != nil {
  481. continue
  482. } else if err != nil {
  483. log.Errorw("TxManager: removeBadBatchInfos", "err", err)
  484. continue
  485. }
  486. t.coord.SendMsg(ctx, MsgStopPipeline{
  487. Reason: fmt.Sprintf("forgeBatch reject: %v", err)})
  488. continue
  489. }
  490. now := time.Now()
  491. if !t.cfg.EthNoReuseNonce && confirm == nil &&
  492. now.Sub(batchInfo.SendTimestamp) > t.cfg.EthTxResendTimeout {
  493. log.Infow("TxManager: forgeBatch tx not been mined timeout, resending",
  494. "tx", batchInfo.EthTx.Hash(), "batch", batchInfo.BatchNum)
  495. if err := t.sendRollupForgeBatch(ctx, batchInfo, true); ctx.Err() != nil {
  496. continue
  497. } else if err != nil {
  498. // If we reach here it's because our ethNode has
  499. // been unable to send the transaction to
  500. // ethereum. This could be due to the ethNode
  501. // failure, or an invalid transaction (that
  502. // can't be mined)
  503. log.Warnw("TxManager: forgeBatch resend failed", "err", err,
  504. "batch", batchInfo.BatchNum)
  505. t.coord.SendMsg(ctx, MsgStopPipeline{
  506. Reason: fmt.Sprintf("forgeBatch resend: %v", err)})
  507. continue
  508. }
  509. }
  510. if confirm != nil && *confirm >= t.cfg.ConfirmBlocks {
  511. log.Debugw("TxManager: forgeBatch tx confirmed",
  512. "tx", batchInfo.EthTx.Hash(), "batch", batchInfo.BatchNum)
  513. t.queue.Remove(queuePosition)
  514. }
  515. }
  516. }
  517. }
  518. func (t *TxManager) removeBadBatchInfos(ctx context.Context) error {
  519. next := 0
  520. for {
  521. batchInfo := t.queue.At(next)
  522. if batchInfo == nil {
  523. break
  524. }
  525. if err := t.checkEthTransactionReceipt(ctx, batchInfo); ctx.Err() != nil {
  526. return nil
  527. } else if err != nil {
  528. // Our ethNode is giving an error different
  529. // than "not found" when getting the receipt
  530. // for the transaction, so we can't figure out
  531. // if it was not mined, mined and successful or
  532. // mined and failed. This could be due to the
  533. // ethNode failure.
  534. next++
  535. continue
  536. }
  537. confirm, err := t.handleReceipt(ctx, batchInfo)
  538. if ctx.Err() != nil {
  539. return nil
  540. } else if err != nil {
  541. // Transaction was rejected
  542. if t.minPipelineNum <= batchInfo.PipelineNum {
  543. t.minPipelineNum = batchInfo.PipelineNum + 1
  544. }
  545. t.queue.Remove(next)
  546. continue
  547. }
  548. // If tx is pending but is from a cancelled pipeline, remove it
  549. // from the queue
  550. if confirm == nil {
  551. if batchInfo.PipelineNum < t.minPipelineNum {
  552. t.queue.Remove(next)
  553. continue
  554. }
  555. }
  556. next++
  557. }
  558. accNonce, err := t.ethClient.EthNonceAt(ctx, t.account.Address, nil)
  559. if err != nil {
  560. return err
  561. }
  562. if !t.cfg.EthNoReuseNonce {
  563. t.accNextNonce = accNonce
  564. }
  565. return nil
  566. }
  567. func (t *TxManager) canForgeAt(blockNum int64) bool {
  568. return canForge(&t.consts.Auction, &t.vars.Auction,
  569. &t.stats.Sync.Auction.CurrentSlot, &t.stats.Sync.Auction.NextSlot,
  570. t.cfg.ForgerAddress, blockNum, t.cfg.MustForgeAtSlotDeadline)
  571. }
  572. func (t *TxManager) mustL1L2Batch(blockNum int64) bool {
  573. lastL1BatchBlockNum := t.lastSentL1BatchBlockNum
  574. if t.stats.Sync.LastL1BatchBlock > lastL1BatchBlockNum {
  575. lastL1BatchBlockNum = t.stats.Sync.LastL1BatchBlock
  576. }
  577. return blockNum-lastL1BatchBlockNum >= t.vars.Rollup.ForgeL1L2BatchTimeout-1
  578. }