Update Common & StateDB & ZKInputs to last protocol version

- Add InvalidData flag to L1Tx
- Add BytesDataAvailability to L1Tx
- Update ZKInputs & HashGlobalInputs to last spec of the protocol
(massive migrations)
- TxProcessor check correctness of L1Txs

Compatible with hermeznetwork/commonjs v0.0.4
(c345239bba)

common/batch.go

@@ -36,6 +36,11 @@ func (bn BatchNum) Bytes() []byte {
 	return batchNumBytes[:]
 }
 
+// BigInt returns a *big.Int representing the BatchNum
+func (bn BatchNum) BigInt() *big.Int {
+	return big.NewInt(int64(bn))
+}
+
 // BatchNumFromBytes returns BatchNum from a []byte
 func BatchNumFromBytes(b []byte) (BatchNum, error) {
 	if len(b) != batchNumBytesLen {

common/l1tx.go

@@ -37,10 +37,14 @@ type L1Tx struct {
 	ToIdx           Idx                `meddler:"to_idx"` // ToIdx is ignored in L1Tx/Deposit, but used in the L1Tx/DepositAndTransfer
 	TokenID         TokenID            `meddler:"token_id"`
 	Amount          *big.Int           `meddler:"amount,bigint"`
-	LoadAmount      *big.Int           `meddler:"load_amount,bigint"`
-	EthBlockNum     int64              `meddler:"eth_block_num"` // Ethereum Block Number in which this L1Tx was added to the queue
-	Type            TxType             `meddler:"type"`
-	BatchNum        *BatchNum          `meddler:"batch_num"`
+	// EffectiveAmount only applies to L1UserTx.
+	EffectiveAmount *big.Int `meddler:"effective_amount,bigintnull"`
+	LoadAmount      *big.Int `meddler:"load_amount,bigint"`
+	// EffectiveLoadAmount only applies to L1UserTx.
+	EffectiveLoadAmount *big.Int  `meddler:"effective_load_amount,bigintnull"`
+	EthBlockNum         int64     `meddler:"eth_block_num"` // Ethereum Block Number in which this L1Tx was added to the queue
+	Type                TxType    `meddler:"type"`
+	BatchNum            *BatchNum `meddler:"batch_num"`
 }
 
 // NewL1Tx returns the given L1Tx with the TxId & Type parameters calculated
@@ -117,7 +121,7 @@ func (tx *L1Tx) CalcTxID() (*TxID, error) {
 
 // Tx returns a *Tx from the L1Tx
 func (tx L1Tx) Tx() Tx {
-	f := new(big.Float).SetInt(tx.Amount)
+	f := new(big.Float).SetInt(tx.EffectiveAmount)
 	amountFloat, _ := f.Float64()
 	userOrigin := new(bool)
 	*userOrigin = tx.UserOrigin
@@ -128,14 +132,14 @@ func (tx L1Tx) Tx() Tx {
 		Position:        tx.Position,
 		FromIdx:         tx.FromIdx,
 		ToIdx:           tx.ToIdx,
-		Amount:          tx.Amount,
+		Amount:          tx.EffectiveAmount,
 		AmountFloat:     amountFloat,
 		TokenID:         tx.TokenID,
 		ToForgeL1TxsNum: tx.ToForgeL1TxsNum,
 		UserOrigin:      userOrigin,
 		FromEthAddr:     tx.FromEthAddr,
 		FromBJJ:         tx.FromBJJ,
-		LoadAmount:      tx.LoadAmount,
+		LoadAmount:      tx.EffectiveLoadAmount,
 		EthBlockNum:     tx.EthBlockNum,
 	}
 	if tx.LoadAmount != nil {
@@ -183,6 +187,34 @@ func (tx L1Tx) TxCompressedData() (*big.Int, error) {
 	return bi, nil
 }
 
+// BytesDataAvailability encodes a L1Tx into []byte for the Data Availability
+func (tx *L1Tx) BytesDataAvailability(nLevels uint32) ([]byte, error) {
+	idxLen := nLevels / 8 //nolint:gomnd
+
+	b := make([]byte, ((nLevels*2)+16+8)/8) //nolint:gomnd
+
+	fromIdxBytes, err := tx.FromIdx.Bytes()
+	if err != nil {
+		return nil, err
+	}
+	copy(b[0:idxLen], fromIdxBytes[6-idxLen:])
+	toIdxBytes, err := tx.ToIdx.Bytes()
+	if err != nil {
+		return nil, err
+	}
+	copy(b[idxLen:idxLen*2], toIdxBytes[6-idxLen:])
+
+	if tx.EffectiveAmount != nil {
+		amountFloat16, err := NewFloat16(tx.EffectiveAmount)
+		if err != nil {
+			return nil, err
+		}
+		copy(b[idxLen*2:idxLen*2+2], amountFloat16.Bytes())
+	}
+	// fee = 0 (as is L1Tx) b[10:11]
+	return b[:], nil
+}
+
 // BytesGeneric returns the generic representation of a L1Tx. This method is
 // used to compute the []byte representation of a L1UserTx, and also to compute
 // the L1TxData for the ZKInputs (at the HashGlobalInputs), using this method

common/l1tx_test.go

@@ -65,6 +65,28 @@ func TestL1TxCompressedData(t *testing.T) {
 	assert.Equal(t, "050004000000000003000000000002000100000000", hex.EncodeToString(txCompressedData.Bytes()))
 }
 
+func TestBytesDataAvailability(t *testing.T) {
+	tx := L1Tx{
+		FromIdx: 2,
+		ToIdx:   3,
+		Amount:  big.NewInt(4),
+		TokenID: 5,
+	}
+	txCompressedData, err := tx.BytesDataAvailability(32)
+	assert.Nil(t, err)
+	assert.Equal(t, "0000000200000003000000", hex.EncodeToString(txCompressedData))
+
+	tx = L1Tx{
+		FromIdx:         2,
+		ToIdx:           3,
+		EffectiveAmount: big.NewInt(4),
+		TokenID:         5,
+	}
+	txCompressedData, err = tx.BytesDataAvailability(32)
+	assert.Nil(t, err)
+	assert.Equal(t, "0000000200000003000400", hex.EncodeToString(txCompressedData))
+}
+
 func TestL1userTxByteParsers(t *testing.T) {
 	var pkComp babyjub.PublicKeyComp
 	pkCompL := []byte("0x56ca90f80d7c374ae7485e9bcc47d4ac399460948da6aeeb899311097925a72c")

common/l2tx.go

@@ -103,8 +103,8 @@ func L2TxsToPoolL2Txs(txs []L2Tx) []PoolL2Tx {
 	return r
 }
 
-// Bytes encodes a L2Tx into []byte
-func (tx L2Tx) Bytes(nLevels uint32) ([]byte, error) {
+// BytesDataAvailability encodes a L2Tx into []byte for the Data Availability
+func (tx L2Tx) BytesDataAvailability(nLevels uint32) ([]byte, error) {
 	idxLen := nLevels / 8 //nolint:gomnd
 
 	b := make([]byte, ((nLevels*2)+16+8)/8) //nolint:gomnd

common/l2tx_test.go

@@ -32,7 +32,7 @@ func TestL2TxByteParsers(t *testing.T) {
 	}
 	// Data from the compatibility test
 	expected := "00000101000001002b16c9"
-	encodedData, err := l2Tx.Bytes(32)
+	encodedData, err := l2Tx.BytesDataAvailability(32)
 	require.Nil(t, err)
 	assert.Equal(t, expected, hex.EncodeToString(encodedData))
 

common/tx.go

@@ -117,7 +117,6 @@ const (
 )
 
 // Tx is a struct used by the TxSelector & BatchBuilder as a generic type generated from L1Tx & PoolL2Tx
-// TODO: this should be changed for "mini Tx"
 type Tx struct {
 	// Generic
 	IsL1        bool      `meddler:"is_l1"`

common/zk.go

@@ -32,9 +32,10 @@ type ZKMetadata struct {
 	// is constant for all circuits: 64)
 	MaxFeeIdxs uint32
 
-	L1TxsData [][]byte
-	L2TxsData [][]byte
-	ChainID   uint16
+	L1TxsData             [][]byte
+	L1TxsDataAvailability [][]byte
+	L2TxsData             [][]byte
+	ChainID               uint16
 
 	NewLastIdxRaw   Idx
 	NewStateRootRaw *merkletree.Hash
@@ -49,6 +50,8 @@ type ZKInputs struct {
 	// General
 	//
 
+	// CurrentNumBatch is the current batch number processed
+	CurrentNumBatch *big.Int `json:"currentNumBatch"` // uint32
 	// inputs for final `hashGlobalInputs`
 	// OldLastIdx is the last index assigned to an account
 	OldLastIdx *big.Int `json:"oldLastIdx"` // uint64 (max nLevels bits)
@@ -72,6 +75,9 @@ type ZKInputs struct {
 	TxCompressedData []*big.Int `json:"txCompressedData"` // big.Int (max 251 bits), len: [nTx]
 	// TxCompressedDataV2, only used in L2Txs, in L1Txs is set to 0
 	TxCompressedDataV2 []*big.Int `json:"txCompressedDataV2"` // big.Int (max 193 bits), len: [nTx]
+	// MaxNumBatch is the maximum allowed batch number when the transaction
+	// can be processed
+	MaxNumBatch []*big.Int `json:"maxNumBatch"` // uint32
 
 	// FromIdx
 	FromIdx []*big.Int `json:"fromIdx"` // uint64 (max nLevels bits), len: [nTx]
@@ -266,7 +272,7 @@ func (z ZKInputs) MarshalJSON() ([]byte, error) {
 }
 
 // NewZKInputs returns a pointer to an initialized struct of ZKInputs
-func NewZKInputs(nTx, maxL1Tx, maxTx, maxFeeIdxs, nLevels uint32) *ZKInputs {
+func NewZKInputs(nTx, maxL1Tx, maxTx, maxFeeIdxs, nLevels uint32, currentNumBatch *big.Int) *ZKInputs {
 	zki := &ZKInputs{}
 	zki.Metadata.NTx = nTx
 	zki.Metadata.MaxFeeIdxs = maxFeeIdxs
@@ -276,15 +282,17 @@ func NewZKInputs(nTx, maxL1Tx, maxTx, maxFeeIdxs, nLevels uint32) *ZKInputs {
 	zki.Metadata.MaxTx = maxTx
 
 	// General
+	zki.CurrentNumBatch = currentNumBatch
 	zki.OldLastIdx = big.NewInt(0)
 	zki.OldStateRoot = big.NewInt(0)
-	zki.GlobalChainID = big.NewInt(0)
+	zki.GlobalChainID = big.NewInt(0) // TODO pass by parameter
 	zki.FeeIdxs = newSlice(maxFeeIdxs)
 	zki.FeePlanTokens = newSlice(maxFeeIdxs)
 
 	// Txs
 	zki.TxCompressedData = newSlice(nTx)
 	zki.TxCompressedDataV2 = newSlice(nTx)
+	zki.MaxNumBatch = newSlice(nTx)
 	zki.FromIdx = newSlice(nTx)
 	zki.AuxFromIdx = newSlice(nTx)
 	zki.ToIdx = newSlice(nTx)
@@ -451,6 +459,12 @@ func (z ZKInputs) ToHashGlobalData() ([]byte, error) {
 	}
 	b = append(b, l1TxsData...)
 
+	var l1TxsDataAvailability []byte
+	for i := 0; i < len(z.Metadata.L1TxsDataAvailability); i++ {
+		l1TxsDataAvailability = append(l1TxsDataAvailability, z.Metadata.L1TxsDataAvailability[i]...)
+	}
+	b = append(b, l1TxsDataAvailability...)
+
 	// [MAX_TX*(2*NLevels + 24) bits] L2TxsData
 	var l2TxsData []byte
 	l2TxDataLen := 2*z.Metadata.NLevels + 24 //nolint:gomnd
@@ -463,9 +477,9 @@ func (z ZKInputs) ToHashGlobalData() ([]byte, error) {
 		return nil, fmt.Errorf("len(l2TxsData): %d, expected: %d", len(l2TxsData), expectedL2TxsDataLen)
 	}
 
-	l2TxsPadding := make([]byte, (int(z.Metadata.MaxTx)-len(z.Metadata.L2TxsData))*int(l2TxDataLen)/8) //nolint:gomnd
-	b = append(b, l2TxsPadding...)
 	b = append(b, l2TxsData...)
+	l2TxsPadding := make([]byte, (int(z.Metadata.MaxTx)-len(z.Metadata.L1TxsDataAvailability)-len(z.Metadata.L2TxsData))*int(l2TxDataLen)/8) //nolint:gomnd
+	b = append(b, l2TxsPadding...)
 
 	// [NLevels * MAX_TOKENS_FEE bits] feeTxsData
 	for i := 0; i < len(z.FeeIdxs); i++ {
@@ -486,5 +500,11 @@ func (z ZKInputs) ToHashGlobalData() ([]byte, error) {
 	binary.BigEndian.PutUint16(chainID[:], z.Metadata.ChainID)
 	b = append(b, chainID[:]...)
 
+	// [32 bits] currentNumBatch
+	currNumBatchBytes := z.CurrentNumBatch.Bytes()
+	var currNumBatch [4]byte
+	copy(currNumBatch[4-len(currNumBatchBytes):], currNumBatchBytes)
+	b = append(b, currNumBatch[:]...)
+
 	return b, nil
 }

common/zk_test.go

@@ -2,13 +2,14 @@ package common
 
 import (
 	"encoding/json"
+	"math/big"
 	"testing"
 
 	"github.com/stretchr/testify/require"
 )
 
 func TestZKInputs(t *testing.T) {
-	zki := NewZKInputs(100, 16, 512, 24, 32)
+	zki := NewZKInputs(100, 16, 512, 24, 32, big.NewInt(1))
 	_, err := json.Marshal(zki)
 	require.Nil(t, err)
 	// fmt.Println(string(s))

db/historydb/historydb.go

@@ -783,24 +783,26 @@ func (hdb *HistoryDB) addL1Txs(d meddler.DB, l1txs []common.L1Tx) error {
 		loadAmountFloat, _ := laf.Float64()
 		txs = append(txs, txWrite{
 			// Generic
-			IsL1:        true,
-			TxID:        l1txs[i].TxID,
-			Type:        l1txs[i].Type,
-			Position:    l1txs[i].Position,
-			FromIdx:     &l1txs[i].FromIdx,
-			ToIdx:       l1txs[i].ToIdx,
-			Amount:      l1txs[i].Amount,
-			AmountFloat: amountFloat,
-			TokenID:     l1txs[i].TokenID,
-			BatchNum:    l1txs[i].BatchNum,
-			EthBlockNum: l1txs[i].EthBlockNum,
+			IsL1:            true,
+			TxID:            l1txs[i].TxID,
+			Type:            l1txs[i].Type,
+			Position:        l1txs[i].Position,
+			FromIdx:         &l1txs[i].FromIdx,
+			ToIdx:           l1txs[i].ToIdx,
+			Amount:          l1txs[i].Amount,
+			EffectiveAmount: l1txs[i].EffectiveAmount,
+			AmountFloat:     amountFloat,
+			TokenID:         l1txs[i].TokenID,
+			BatchNum:        l1txs[i].BatchNum,
+			EthBlockNum:     l1txs[i].EthBlockNum,
 			// L1
-			ToForgeL1TxsNum: l1txs[i].ToForgeL1TxsNum,
-			UserOrigin:      &l1txs[i].UserOrigin,
-			FromEthAddr:     &l1txs[i].FromEthAddr,
-			FromBJJ:         l1txs[i].FromBJJ,
-			LoadAmount:      l1txs[i].LoadAmount,
-			LoadAmountFloat: &loadAmountFloat,
+			ToForgeL1TxsNum:     l1txs[i].ToForgeL1TxsNum,
+			UserOrigin:          &l1txs[i].UserOrigin,
+			FromEthAddr:         &l1txs[i].FromEthAddr,
+			FromBJJ:             l1txs[i].FromBJJ,
+			LoadAmount:          l1txs[i].LoadAmount,
+			EffectiveLoadAmount: l1txs[i].EffectiveLoadAmount,
+			LoadAmountFloat:     &loadAmountFloat,
 		})
 	}
 	return hdb.addTxs(d, txs)
@@ -846,6 +848,7 @@ func (hdb *HistoryDB) addTxs(d meddler.DB, txs []txWrite) error {
 			from_idx,
 			to_idx,
 			amount,
+			effective_amount,
 			amount_f,
 			token_id,
 			batch_num,
@@ -855,6 +858,7 @@ func (hdb *HistoryDB) addTxs(d meddler.DB, txs []txWrite) error {
 			from_eth_addr,
 			from_bjj,
 			load_amount,
+			effective_load_amount,
 			load_amount_f,
 			fee,
 			nonce
@@ -1162,8 +1166,9 @@ func (hdb *HistoryDB) GetAllL1UserTxs() ([]common.L1Tx, error) {
 	err := meddler.QueryAll(
 		hdb.db, &txs,
 		`SELECT tx.id, tx.to_forge_l1_txs_num, tx.position, tx.user_origin,
-		tx.from_idx, tx.from_eth_addr, tx.from_bjj, tx.to_idx, tx.token_id, tx.amount,
-		tx.load_amount, tx.eth_block_num, tx.type, tx.batch_num
+		tx.from_idx, tx.from_eth_addr, tx.from_bjj, tx.to_idx, tx.token_id,
+		tx.amount, tx.effective_amount, tx.load_amount, tx.effective_load_amount,
+		tx.eth_block_num, tx.type, tx.batch_num
 		FROM tx WHERE is_l1 = TRUE AND user_origin = TRUE;`,
 	)
 	return db.SlicePtrsToSlice(txs).([]common.L1Tx), err
@@ -1175,8 +1180,9 @@ func (hdb *HistoryDB) GetAllL1CoordinatorTxs() ([]common.L1Tx, error) {
 	err := meddler.QueryAll(
 		hdb.db, &txs,
 		`SELECT tx.id, tx.to_forge_l1_txs_num, tx.position, tx.user_origin,
-		tx.from_idx, tx.from_eth_addr, tx.from_bjj, tx.to_idx, tx.token_id, tx.amount,
-		tx.load_amount, tx.eth_block_num, tx.type, tx.batch_num
+		tx.from_idx, tx.from_eth_addr, tx.from_bjj, tx.to_idx, tx.token_id,
+		tx.amount, tx.effective_amount, tx.load_amount, tx.effective_load_amount,
+		tx.eth_block_num, tx.type, tx.batch_num
 		FROM tx WHERE is_l1 = TRUE AND user_origin = FALSE;`,
 	)
 	return db.SlicePtrsToSlice(txs).([]common.L1Tx), err
@@ -1201,8 +1207,9 @@ func (hdb *HistoryDB) GetL1UserTxs(toForgeL1TxsNum int64) ([]common.L1Tx, error)
 	err := meddler.QueryAll(
 		hdb.db, &txs,
 		`SELECT tx.id, tx.to_forge_l1_txs_num, tx.position, tx.user_origin,
-		tx.from_idx, tx.from_eth_addr, tx.from_bjj, tx.to_idx, tx.token_id, tx.amount,
-		tx.load_amount, tx.eth_block_num, tx.type, tx.batch_num
+		tx.from_idx, tx.from_eth_addr, tx.from_bjj, tx.to_idx, tx.token_id,
+		tx.amount, tx.effective_amount, tx.load_amount, tx.effective_load_amount,
+		tx.eth_block_num, tx.type, tx.batch_num
 		FROM tx WHERE to_forge_l1_txs_num = $1 AND is_l1 = TRUE AND user_origin = TRUE;`,
 		toForgeL1TxsNum,
 	)

db/historydb/views.go

@@ -112,24 +112,26 @@ func (tx TxAPI) MarshalJSON() ([]byte, error) {
 // in order to perform inserts into tx table
 type txWrite struct {
 	// Generic
-	IsL1        bool             `meddler:"is_l1"`
-	TxID        common.TxID      `meddler:"id"`
-	Type        common.TxType    `meddler:"type"`
-	Position    int              `meddler:"position"`
-	FromIdx     *common.Idx      `meddler:"from_idx"`
-	ToIdx       common.Idx       `meddler:"to_idx"`
-	Amount      *big.Int         `meddler:"amount,bigint"`
-	AmountFloat float64          `meddler:"amount_f"`
-	TokenID     common.TokenID   `meddler:"token_id"`
-	BatchNum    *common.BatchNum `meddler:"batch_num"`     // batchNum in which this tx was forged. If the tx is L2, this must be != 0
-	EthBlockNum int64            `meddler:"eth_block_num"` // Ethereum Block Number in which this L1Tx was added to the queue
+	IsL1            bool             `meddler:"is_l1"`
+	TxID            common.TxID      `meddler:"id"`
+	Type            common.TxType    `meddler:"type"`
+	Position        int              `meddler:"position"`
+	FromIdx         *common.Idx      `meddler:"from_idx"`
+	ToIdx           common.Idx       `meddler:"to_idx"`
+	Amount          *big.Int         `meddler:"amount,bigint"`
+	EffectiveAmount *big.Int         `meddler:"effective_amount,bigintnull"`
+	AmountFloat     float64          `meddler:"amount_f"`
+	TokenID         common.TokenID   `meddler:"token_id"`
+	BatchNum        *common.BatchNum `meddler:"batch_num"`     // batchNum in which this tx was forged. If the tx is L2, this must be != 0
+	EthBlockNum     int64            `meddler:"eth_block_num"` // Ethereum Block Number in which this L1Tx was added to the queue
 	// L1
-	ToForgeL1TxsNum *int64             `meddler:"to_forge_l1_txs_num"` // toForgeL1TxsNum in which the tx was forged / will be forged
-	UserOrigin      *bool              `meddler:"user_origin"`         // true if the tx was originated by a user, false if it was aoriginated by a coordinator. Note that this differ from the spec for implementation simplification purpposes
-	FromEthAddr     *ethCommon.Address `meddler:"from_eth_addr"`
-	FromBJJ         *babyjub.PublicKey `meddler:"from_bjj"`
-	LoadAmount      *big.Int           `meddler:"load_amount,bigintnull"`
-	LoadAmountFloat *float64           `meddler:"load_amount_f"`
+	ToForgeL1TxsNum     *int64             `meddler:"to_forge_l1_txs_num"` // toForgeL1TxsNum in which the tx was forged / will be forged
+	UserOrigin          *bool              `meddler:"user_origin"`         // true if the tx was originated by a user, false if it was aoriginated by a coordinator. Note that this differ from the spec for implementation simplification purpposes
+	FromEthAddr         *ethCommon.Address `meddler:"from_eth_addr"`
+	FromBJJ             *babyjub.PublicKey `meddler:"from_bjj"`
+	LoadAmount          *big.Int           `meddler:"load_amount,bigintnull"`
+	EffectiveLoadAmount *big.Int           `meddler:"effective_load_amount,bigintnull"`
+	LoadAmountFloat     *float64           `meddler:"load_amount_f"`
 	// L2
 	Fee   *common.FeeSelector `meddler:"fee"`
 	Nonce *common.Nonce       `meddler:"nonce"`

db/migrations/0001.sql

@@ -149,6 +149,7 @@ CREATE TABLE tx (
     to_eth_addr BYTEA,
     to_bjj BYTEA,
     amount BYTEA NOT NULL,
+    effective_amount BYTEA,
     amount_f NUMERIC NOT NULL,
     token_id INT NOT NULL REFERENCES token (token_id),
     amount_usd NUMERIC, -- Value of the amount in USD at the moment the tx was inserted in the DB
@@ -158,6 +159,7 @@ CREATE TABLE tx (
     to_forge_l1_txs_num BIGINT,
     user_origin BOOLEAN,
     load_amount BYTEA,
+    effective_load_amount BYTEA,
     load_amount_f NUMERIC,
     load_amount_usd NUMERIC,
     -- L2

db/statedb/txprocessors.go

@@ -1,6 +1,7 @@
 package statedb
 
 import (
+	"bytes"
 	"errors"
 	"fmt"
 	"io/ioutil"
@@ -93,7 +94,7 @@ func (s *StateDB) ProcessTxs(ptc ProcessTxsConfig, coordIdxs []common.Idx, l1use
 	exits := make([]processedExit, nTx)
 
 	if s.typ == TypeBatchBuilder {
-		s.zki = common.NewZKInputs(uint32(nTx), ptc.MaxL1Tx, ptc.MaxTx, ptc.MaxFeeTx, ptc.NLevels)
+		s.zki = common.NewZKInputs(uint32(nTx), ptc.MaxL1Tx, ptc.MaxTx, ptc.MaxFeeTx, ptc.NLevels, s.currentBatch.BigInt())
 		s.zki.OldLastIdx = s.idx.BigInt()
 		s.zki.OldStateRoot = s.mt.Root().BigInt()
 	}
@@ -138,6 +139,12 @@ func (s *StateDB) ProcessTxs(ptc ProcessTxsConfig, coordIdxs []common.Idx, l1use
 			}
 			s.zki.Metadata.L1TxsData = append(s.zki.Metadata.L1TxsData, l1TxData)
 
+			l1TxDataAvailability, err := l1usertxs[i].BytesDataAvailability(s.zki.Metadata.NLevels)
+			if err != nil {
+				return nil, err
+			}
+			s.zki.Metadata.L1TxsDataAvailability = append(s.zki.Metadata.L1TxsDataAvailability, l1TxDataAvailability)
+
 			if s.i < nTx-1 {
 				s.zki.ISOutIdx[s.i] = s.idx.BigInt()
 				s.zki.ISStateRoot[s.i] = s.mt.Root().BigInt()
@@ -222,7 +229,7 @@ func (s *StateDB) ProcessTxs(ptc ProcessTxsConfig, coordIdxs []common.Idx, l1use
 			return nil, err
 		}
 		if s.zki != nil {
-			l2TxData, err := l2txs[i].L2Tx().Bytes(s.zki.Metadata.NLevels)
+			l2TxData, err := l2txs[i].L2Tx().BytesDataAvailability(s.zki.Metadata.NLevels)
 			if err != nil {
 				return nil, err
 			}
@@ -443,6 +450,8 @@ func (s *StateDB) processL1Tx(exitTree *merkletree.MerkleTree, tx *common.L1Tx)
 
 	switch tx.Type {
 	case common.TxTypeForceTransfer:
+		s.computeEffectiveAmounts(tx)
+
 		// go to the MT account of sender and receiver, and update balance
 		// & nonce
 
@@ -454,6 +463,8 @@ func (s *StateDB) processL1Tx(exitTree *merkletree.MerkleTree, tx *common.L1Tx)
 			return nil, nil, false, nil, err
 		}
 	case common.TxTypeCreateAccountDeposit:
+		s.computeEffectiveAmounts(tx)
+
 		// add new account to the MT, update balance of the MT account
 		err := s.applyCreateAccount(tx)
 		if err != nil {
@@ -464,6 +475,8 @@ func (s *StateDB) processL1Tx(exitTree *merkletree.MerkleTree, tx *common.L1Tx)
 		// which in the case type==TypeSynchronizer will be added to an
 		// array of created accounts that will be returned
 	case common.TxTypeDeposit:
+		s.computeEffectiveAmounts(tx)
+
 		// update balance of the MT account
 		err := s.applyDeposit(tx, false)
 		if err != nil {
@@ -471,6 +484,8 @@ func (s *StateDB) processL1Tx(exitTree *merkletree.MerkleTree, tx *common.L1Tx)
 			return nil, nil, false, nil, err
 		}
 	case common.TxTypeDepositTransfer:
+		s.computeEffectiveAmounts(tx)
+
 		// update balance in MT account, update balance & nonce of sender
 		// & receiver
 		err := s.applyDeposit(tx, true)
@@ -479,6 +494,8 @@ func (s *StateDB) processL1Tx(exitTree *merkletree.MerkleTree, tx *common.L1Tx)
 			return nil, nil, false, nil, err
 		}
 	case common.TxTypeCreateAccountDepositTransfer:
+		s.computeEffectiveAmounts(tx)
+
 		// add new account to the merkletree, update balance in MT account,
 		// update balance & nonce of sender & receiver
 		err := s.applyCreateAccountDepositTransfer(tx)
@@ -487,6 +504,8 @@ func (s *StateDB) processL1Tx(exitTree *merkletree.MerkleTree, tx *common.L1Tx)
 			return nil, nil, false, nil, err
 		}
 	case common.TxTypeForceExit:
+		s.computeEffectiveAmounts(tx)
+
 		// execute exit flow
 		// coordIdxsMap is 'nil', as at L1Txs there is no L2 fees
 		exitAccount, newExit, err := s.applyExit(nil, nil, exitTree, tx.Tx())
@@ -520,6 +539,11 @@ func (s *StateDB) processL2Tx(coordIdxsMap map[common.TokenID]common.Idx, collec
 	var err error
 	// if tx.ToIdx==0, get toIdx by ToEthAddr or ToBJJ
 	if tx.ToIdx == common.Idx(0) && tx.AuxToIdx == common.Idx(0) {
+		if s.typ == TypeSynchronizer {
+			// this should never be reached
+			log.Error("WARNING: In StateDB with Synchronizer mode L2.ToIdx can't be 0")
+			return nil, nil, false, fmt.Errorf("In StateDB with Synchronizer mode L2.ToIdx can't be 0")
+		}
 		// case when tx.Type== common.TxTypeTransferToEthAddr or common.TxTypeTransferToBJJ
 		tx.AuxToIdx, err = s.GetIdxByEthAddrBJJ(tx.ToEthAddr, tx.ToBJJ, tx.TokenID)
 		if err != nil {
@@ -612,7 +636,7 @@ func (s *StateDB) applyCreateAccount(tx *common.L1Tx) error {
 	account := &common.Account{
 		TokenID:   tx.TokenID,
 		Nonce:     0,
-		Balance:   tx.LoadAmount,
+		Balance:   tx.EffectiveLoadAmount,
 		PublicKey: tx.FromBJJ,
 		EthAddr:   tx.FromEthAddr,
 	}
@@ -628,7 +652,7 @@ func (s *StateDB) applyCreateAccount(tx *common.L1Tx) error {
 			s.zki.Sign1[s.i] = big.NewInt(1)
 		}
 		s.zki.Ay1[s.i] = tx.FromBJJ.Y
-		s.zki.Balance1[s.i] = tx.LoadAmount
+		s.zki.Balance1[s.i] = tx.EffectiveLoadAmount
 		s.zki.EthAddr1[s.i] = common.EthAddrToBigInt(tx.FromEthAddr)
 		s.zki.Siblings1[s.i] = siblingsToZKInputFormat(p.Siblings)
 		if p.IsOld0 {
@@ -656,12 +680,12 @@ func (s *StateDB) applyCreateAccount(tx *common.L1Tx) error {
 // andTransfer parameter is set to true, the method will also apply the
 // Transfer of the L1Tx/DepositTransfer
 func (s *StateDB) applyDeposit(tx *common.L1Tx, transfer bool) error {
-	// deposit the tx.LoadAmount into the sender account
+	// deposit the tx.EffectiveLoadAmount into the sender account
 	accSender, err := s.GetAccount(tx.FromIdx)
 	if err != nil {
 		return err
 	}
-	accSender.Balance = new(big.Int).Add(accSender.Balance, tx.LoadAmount)
+	accSender.Balance = new(big.Int).Add(accSender.Balance, tx.EffectiveLoadAmount)
 
 	// in case that the tx is a L1Tx>DepositTransfer
 	var accReceiver *common.Account
@@ -671,9 +695,9 @@ func (s *StateDB) applyDeposit(tx *common.L1Tx, transfer bool) error {
 			return err
 		}
 		// subtract amount to the sender
-		accSender.Balance = new(big.Int).Sub(accSender.Balance, tx.Amount)
+		accSender.Balance = new(big.Int).Sub(accSender.Balance, tx.EffectiveAmount)
 		// add amount to the receiver
-		accReceiver.Balance = new(big.Int).Add(accReceiver.Balance, tx.Amount)
+		accReceiver.Balance = new(big.Int).Add(accReceiver.Balance, tx.EffectiveAmount)
 	}
 	// update sender account in localStateDB
 	p, err := s.UpdateAccount(tx.FromIdx, accSender)
@@ -723,7 +747,8 @@ func (s *StateDB) applyDeposit(tx *common.L1Tx, transfer bool) error {
 // tx.ToIdx==0, then toIdx!=0, and will be used the toIdx parameter as Idx of
 // the receiver. This parameter is used when the tx.ToIdx is not specified and
 // the real ToIdx is found trhrough the ToEthAddr or ToBJJ.
-func (s *StateDB) applyTransfer(coordIdxsMap map[common.TokenID]common.Idx, collectedFees map[common.TokenID]*big.Int,
+func (s *StateDB) applyTransfer(coordIdxsMap map[common.TokenID]common.Idx,
+	collectedFees map[common.TokenID]*big.Int,
 	tx common.Tx, auxToIdx common.Idx) error {
 	if auxToIdx == common.Idx(0) {
 		auxToIdx = tx.ToIdx
@@ -824,7 +849,7 @@ func (s *StateDB) applyCreateAccountDepositTransfer(tx *common.L1Tx) error {
 	accSender := &common.Account{
 		TokenID:   tx.TokenID,
 		Nonce:     0,
-		Balance:   tx.LoadAmount,
+		Balance:   tx.EffectiveLoadAmount,
 		PublicKey: tx.FromBJJ,
 		EthAddr:   tx.FromEthAddr,
 	}
@@ -833,9 +858,9 @@ func (s *StateDB) applyCreateAccountDepositTransfer(tx *common.L1Tx) error {
 		return err
 	}
 	// subtract amount to the sender
-	accSender.Balance = new(big.Int).Sub(accSender.Balance, tx.Amount)
+	accSender.Balance = new(big.Int).Sub(accSender.Balance, tx.EffectiveAmount)
 	// add amount to the receiver
-	accReceiver.Balance = new(big.Int).Add(accReceiver.Balance, tx.Amount)
+	accReceiver.Balance = new(big.Int).Add(accReceiver.Balance, tx.EffectiveAmount)
 
 	// create Account of the Sender
 	p, err := s.CreateAccount(common.Idx(s.idx+1), accSender)
@@ -849,7 +874,7 @@ func (s *StateDB) applyCreateAccountDepositTransfer(tx *common.L1Tx) error {
 			s.zki.Sign1[s.i] = big.NewInt(1)
 		}
 		s.zki.Ay1[s.i] = tx.FromBJJ.Y
-		s.zki.Balance1[s.i] = tx.LoadAmount
+		s.zki.Balance1[s.i] = tx.EffectiveLoadAmount
 		s.zki.EthAddr1[s.i] = common.EthAddrToBigInt(tx.FromEthAddr)
 		s.zki.Siblings1[s.i] = siblingsToZKInputFormat(p.Siblings)
 		if p.IsOld0 {
@@ -890,8 +915,9 @@ func (s *StateDB) applyCreateAccountDepositTransfer(tx *common.L1Tx) error {
 
 // It returns the ExitAccount and a boolean determining if the Exit created a
 // new Leaf in the ExitTree.
-func (s *StateDB) applyExit(coordIdxsMap map[common.TokenID]common.Idx, collectedFees map[common.TokenID]*big.Int,
-	exitTree *merkletree.MerkleTree, tx common.Tx) (*common.Account, bool, error) {
+func (s *StateDB) applyExit(coordIdxsMap map[common.TokenID]common.Idx,
+	collectedFees map[common.TokenID]*big.Int, exitTree *merkletree.MerkleTree,
+	tx common.Tx) (*common.Account, bool, error) {
 	// 0. subtract tx.Amount from current Account in StateMT
 	// add the tx.Amount into the Account (tx.FromIdx) in the ExitMT
 	acc, err := s.GetAccount(tx.FromIdx)
@@ -971,6 +997,89 @@ func (s *StateDB) applyExit(coordIdxsMap map[common.TokenID]common.Idx, collecte
 	return exitAccount, false, err
 }
 
+// computeEffectiveAmounts checks that the L1Tx data is correct
+func (s *StateDB) computeEffectiveAmounts(tx *common.L1Tx) {
+	if !tx.UserOrigin {
+		// case where the L1Tx is generated by the Coordinator
+		tx.EffectiveAmount = big.NewInt(0)
+		tx.EffectiveLoadAmount = big.NewInt(0)
+		return
+	}
+
+	tx.EffectiveAmount = tx.Amount
+	tx.EffectiveLoadAmount = tx.LoadAmount
+	if tx.Type == common.TxTypeCreateAccountDeposit {
+		return
+	}
+
+	if tx.ToIdx >= common.UserThreshold && tx.FromIdx == common.Idx(0) {
+		// CreateAccountDepositTransfer case
+		cmp := tx.LoadAmount.Cmp(tx.Amount)
+		if cmp == -1 { // LoadAmount<Amount
+			tx.EffectiveAmount = big.NewInt(0)
+			return
+		}
+		return
+	}
+
+	accSender, err := s.GetAccount(tx.FromIdx)
+	if err != nil {
+		log.Debugf("EffectiveAmount & EffectiveLoadAmount = 0: can not get account for tx.FromIdx: %d", tx.FromIdx)
+		tx.EffectiveLoadAmount = big.NewInt(0)
+		tx.EffectiveAmount = big.NewInt(0)
+		return
+	}
+
+	// check that tx.TokenID corresponds to the Sender account TokenID
+	if tx.TokenID != accSender.TokenID {
+		log.Debugf("EffectiveAmount & EffectiveLoadAmount = 0: tx.TokenID (%d) !=sender account TokenID (%d)", tx.TokenID, accSender.TokenID)
+		tx.EffectiveLoadAmount = big.NewInt(0)
+		tx.EffectiveAmount = big.NewInt(0)
+		return
+	}
+
+	// check that Sender has enough balance
+	bal := accSender.Balance
+	if tx.LoadAmount != nil {
+		bal = new(big.Int).Add(bal, tx.EffectiveLoadAmount)
+	}
+	cmp := bal.Cmp(tx.Amount)
+	if cmp == -1 {
+		log.Debugf("EffectiveAmount = 0: Not enough funds (%s<%s)", bal.String(), tx.Amount.String())
+		tx.EffectiveAmount = big.NewInt(0)
+		return
+	}
+
+	// check that the tx.FromEthAddr is the same than the EthAddress of the
+	// Sender
+	if !bytes.Equal(tx.FromEthAddr.Bytes(), accSender.EthAddr.Bytes()) {
+		log.Debugf("EffectiveAmount & EffectiveLoadAmount = 0: tx.FromEthAddr (%s) must be the same EthAddr of the sender account by the Idx (%s)", tx.FromEthAddr.Hex(), accSender.EthAddr.Hex())
+		tx.EffectiveLoadAmount = big.NewInt(0)
+		tx.EffectiveAmount = big.NewInt(0)
+		return
+	}
+
+	if tx.ToIdx == common.Idx(1) || tx.ToIdx == common.Idx(0) {
+		// if transfer is Exit type, there are no more checks
+		return
+	}
+
+	// check that TokenID is the same for Sender & Receiver account
+	accReceiver, err := s.GetAccount(tx.ToIdx)
+	if err != nil {
+		log.Debugf("EffectiveAmount & EffectiveLoadAmount = 0: can not get account for tx.ToIdx: %d", tx.ToIdx)
+		tx.EffectiveLoadAmount = big.NewInt(0)
+		tx.EffectiveAmount = big.NewInt(0)
+		return
+	}
+	if accSender.TokenID != accReceiver.TokenID {
+		log.Debugf("EffectiveAmount & EffectiveLoadAmount = 0: sender account TokenID (%d) != receiver account TokenID (%d)", tx.TokenID, accSender.TokenID)
+		tx.EffectiveLoadAmount = big.NewInt(0)
+		tx.EffectiveAmount = big.NewInt(0)
+		return
+	}
+}
+
 // getIdx returns the stored Idx from the localStateDB, which is the last Idx
 // used for an Account in the localStateDB.
 func (s *StateDB) getIdx() (common.Idx, error) {

db/statedb/txprocessors_test.go

@@ -24,6 +24,116 @@ func checkBalance(t *testing.T, tc *til.Context, sdb *StateDB, username string,
 	assert.Equal(t, expected, acc.Balance.String())
 }
 
+func TestCheckL1TxInvalidData(t *testing.T) {
+	dir, err := ioutil.TempDir("", "tmpdb")
+	require.Nil(t, err)
+	defer assert.Nil(t, os.RemoveAll(dir))
+
+	sdb, err := NewStateDB(dir, TypeSynchronizer, 32)
+	assert.Nil(t, err)
+
+	set := `
+		Type: Blockchain
+		AddToken(1)
+	
+		CreateAccountDeposit(0) A: 10
+		CreateAccountDeposit(0) B: 10
+		CreateAccountDeposit(1) C: 10
+		> batchL1
+		> batchL1
+		> block
+	`
+	tc := til.NewContext(common.RollupConstMaxL1UserTx)
+	blocks, err := tc.GenerateBlocks(set)
+	require.Nil(t, err)
+
+	ptc := ProcessTxsConfig{
+		NLevels:  32,
+		MaxFeeTx: 64,
+		MaxTx:    512,
+		MaxL1Tx:  16,
+	}
+	_, err = sdb.ProcessTxs(ptc, nil, blocks[0].Rollup.L1UserTxs, nil, nil)
+	require.Nil(t, err)
+
+	tx := common.L1Tx{
+		FromIdx:     256,
+		ToIdx:       257,
+		Amount:      big.NewInt(10),
+		LoadAmount:  big.NewInt(0),
+		FromEthAddr: tc.Users["A"].Addr,
+		UserOrigin:  true,
+	}
+	sdb.computeEffectiveAmounts(&tx)
+	assert.Equal(t, big.NewInt(0), tx.EffectiveLoadAmount)
+	assert.Equal(t, big.NewInt(10), tx.EffectiveAmount)
+
+	// expect error due not enough funds
+	tx = common.L1Tx{
+		FromIdx:     256,
+		ToIdx:       257,
+		Amount:      big.NewInt(11),
+		LoadAmount:  big.NewInt(0),
+		FromEthAddr: tc.Users["A"].Addr,
+		UserOrigin:  true,
+	}
+	sdb.computeEffectiveAmounts(&tx)
+	assert.Equal(t, big.NewInt(0), tx.EffectiveLoadAmount)
+	assert.Equal(t, big.NewInt(0), tx.EffectiveAmount)
+
+	// expect no-error due not enough funds in a
+	// CreateAccountDepositTransfer transction
+	tx = common.L1Tx{
+		FromIdx:    0,
+		ToIdx:      257,
+		Amount:     big.NewInt(10),
+		LoadAmount: big.NewInt(10),
+		UserOrigin: true,
+	}
+	sdb.computeEffectiveAmounts(&tx)
+	assert.Equal(t, big.NewInt(10), tx.EffectiveLoadAmount)
+	assert.Equal(t, big.NewInt(10), tx.EffectiveAmount)
+
+	// expect error due not enough funds in a CreateAccountDepositTransfer
+	// transction
+	tx = common.L1Tx{
+		FromIdx:    0,
+		ToIdx:      257,
+		Amount:     big.NewInt(11),
+		LoadAmount: big.NewInt(10),
+		UserOrigin: true,
+	}
+	sdb.computeEffectiveAmounts(&tx)
+	assert.Equal(t, big.NewInt(10), tx.EffectiveLoadAmount)
+	assert.Equal(t, big.NewInt(0), tx.EffectiveAmount)
+
+	// expect error due not same TokenID
+	tx = common.L1Tx{
+		FromIdx:     256,
+		ToIdx:       258,
+		Amount:      big.NewInt(5),
+		LoadAmount:  big.NewInt(0),
+		FromEthAddr: tc.Users["A"].Addr,
+		UserOrigin:  true,
+	}
+	sdb.computeEffectiveAmounts(&tx)
+	assert.Equal(t, big.NewInt(0), tx.EffectiveLoadAmount)
+	assert.Equal(t, big.NewInt(0), tx.EffectiveAmount)
+
+	// expect error due not same EthAddr
+	tx = common.L1Tx{
+		FromIdx:     256,
+		ToIdx:       257,
+		Amount:      big.NewInt(8),
+		LoadAmount:  big.NewInt(0),
+		FromEthAddr: tc.Users["B"].Addr,
+		UserOrigin:  true,
+	}
+	sdb.computeEffectiveAmounts(&tx)
+	assert.Equal(t, big.NewInt(0), tx.EffectiveLoadAmount)
+	assert.Equal(t, big.NewInt(0), tx.EffectiveAmount)
+}
+
 func TestProcessTxsBalances(t *testing.T) {
 	dir, err := ioutil.TempDir("", "tmpdb")
 	require.Nil(t, err)
@@ -139,7 +249,7 @@ func TestProcessTxsBalances(t *testing.T) {
 	require.Nil(t, err)
 
 	// use Set of PoolL2 txs
-	poolL2Txs, err := tc.GeneratePoolL2Txs(til.SetPoolL2MinimumFlow0)
+	poolL2Txs, err := tc.GeneratePoolL2Txs(til.SetPoolL2MinimumFlow1)
 	assert.Nil(t, err)
 
 	_, err = sdb.ProcessTxs(ptc, coordIdxs, []common.L1Tx{}, []common.L1Tx{}, poolL2Txs)
@@ -452,6 +562,7 @@ func TestProcessTxsRootTestVectors(t *testing.T) {
 			FromEthAddr: ethCommon.HexToAddress("0x7e5f4552091a69125d5dfcb7b8c2659029395bdf"),
 			ToIdx:       0,
 			Type:        common.TxTypeCreateAccountDeposit,
+			UserOrigin:  true,
 		},
 	}
 	l2Txs := []common.PoolL2Tx{
@@ -499,6 +610,7 @@ func TestCircomTest(t *testing.T) {
 			FromEthAddr: ethCommon.HexToAddress("0x7e5f4552091a69125d5dfcb7b8c2659029395bdf"),
 			ToIdx:       0,
 			Type:        common.TxTypeCreateAccountDeposit,
+			UserOrigin:  true,
 		},
 	}
 	l2Txs := []common.PoolL2Tx{
@@ -564,8 +676,7 @@ func TestZKInputsHashTestVector0(t *testing.T) {
 	assert.Nil(t, err)
 	l1Txs := []common.L1Tx{
 		{
-			FromIdx: 0,
-			// LoadAmount:  big.NewInt(10400),
+			FromIdx:     0,
 			LoadAmount:  big.NewInt(16000000),
 			Amount:      big.NewInt(0),
 			TokenID:     1,
@@ -573,6 +684,7 @@ func TestZKInputsHashTestVector0(t *testing.T) {
 			FromEthAddr: ethCommon.HexToAddress("0x7e5f4552091a69125d5dfcb7b8c2659029395bdf"),
 			ToIdx:       0,
 			Type:        common.TxTypeCreateAccountDeposit,
+			UserOrigin:  true,
 		},
 	}
 	l2Txs := []common.PoolL2Tx{
@@ -593,6 +705,10 @@ func TestZKInputsHashTestVector0(t *testing.T) {
 		MaxTx:    32,
 		MaxL1Tx:  16,
 	}
+	// skip first batch to do the test with BatchNum=1
+	_, err = sdb.ProcessTxs(ptc, nil, nil, nil, nil)
+	require.Nil(t, err)
+
 	ptOut, err := sdb.ProcessTxs(ptc, nil, l1Txs, nil, l2Txs)
 	require.Nil(t, err)
 
@@ -610,7 +726,7 @@ func TestZKInputsHashTestVector0(t *testing.T) {
 	toHash, err := ptOut.ZKInputs.ToHashGlobalData()
 	assert.Nil(t, err)
 	// value from js test vector
-	expectedToHash := "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"
+	expectedToHash := "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"
 	// checks are splitted to find the difference easier
 	assert.Equal(t, expectedToHash[:1000], hex.EncodeToString(toHash)[:1000])
 	assert.Equal(t, expectedToHash[1000:2000], hex.EncodeToString(toHash)[1000:2000])
@@ -619,7 +735,7 @@ func TestZKInputsHashTestVector0(t *testing.T) {
 	h, err := ptOut.ZKInputs.HashGlobalData()
 	require.Nil(t, err)
 	// value from js test vector
-	assert.Equal(t, "80757288244566854497474223360206077562032050734432637237701187686677568506", h.String())
+	assert.Equal(t, "4356692423721763303547321618014315464040324829724049399065961225345730555597", h.String())
 }
 
 func TestZKInputsHashTestVector1(t *testing.T) {
@@ -646,6 +762,7 @@ func TestZKInputsHashTestVector1(t *testing.T) {
 			FromEthAddr: ethCommon.HexToAddress("0x7e5f4552091a69125d5dfcb7b8c2659029395bdf"),
 			ToIdx:       0,
 			Type:        common.TxTypeCreateAccountDeposit,
+			UserOrigin:  true,
 		},
 		{
 			FromIdx:     0,
@@ -656,6 +773,7 @@ func TestZKInputsHashTestVector1(t *testing.T) {
 			FromEthAddr: ethCommon.HexToAddress("0x2b5ad5c4795c026514f8317c7a215e218dccd6cf"),
 			ToIdx:       0,
 			Type:        common.TxTypeCreateAccountDeposit,
+			UserOrigin:  true,
 		},
 	}
 	l2Txs := []common.PoolL2Tx{
@@ -676,6 +794,10 @@ func TestZKInputsHashTestVector1(t *testing.T) {
 		MaxTx:    32,
 		MaxL1Tx:  16,
 	}
+	// skip first batch to do the test with BatchNum=1
+	_, err = sdb.ProcessTxs(ptc, nil, nil, nil, nil)
+	require.Nil(t, err)
+
 	ptOut, err := sdb.ProcessTxs(ptc, nil, l1Txs, nil, l2Txs)
 	require.Nil(t, err)
 
@@ -697,7 +819,7 @@ func TestZKInputsHashTestVector1(t *testing.T) {
 	toHash, err := ptOut.ZKInputs.ToHashGlobalData()
 	assert.Nil(t, err)
 	// value from js test vector
-	expectedToHash := "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"
+	expectedToHash := "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"
 	// checks are splitted to find the difference easier
 	assert.Equal(t, expectedToHash[:1000], hex.EncodeToString(toHash)[:1000])
 	assert.Equal(t, expectedToHash[1000:2000], hex.EncodeToString(toHash)[1000:2000])
@@ -706,5 +828,5 @@ func TestZKInputsHashTestVector1(t *testing.T) {
 	h, err := ptOut.ZKInputs.HashGlobalData()
 	require.Nil(t, err)
 	// value from js test vector
-	assert.Equal(t, "10900521462378877053056992084240080637954406133884857263674494661625916419481", h.String())
+	assert.Equal(t, "20293112365009290386650039345314592436395562810005523677125576447132206192598", h.String())
 }

eth/rollup.go

@@ -251,7 +251,7 @@ func (c *RollupClient) RollupForgeBatch(args *RollupForgeBatchArgs) (tx *types.T
 			var l2DataBytes []byte
 			for i := 0; i < len(args.L2TxsData); i++ {
 				l2 := args.L2TxsData[i]
-				bytesl2, err := l2.Bytes(uint32(nLevels))
+				bytesl2, err := l2.BytesDataAvailability(uint32(nLevels))
 				if err != nil {
 					return nil, err
 				}

synchronizer/synchronizer_test.go

@@ -80,9 +80,14 @@ func checkSyncBlock(t *testing.T, s *Synchronizer, blockNum int, block, syncBloc
 	assert.Equal(t, len(block.Rollup.L1UserTxs), len(syncBlock.Rollup.L1UserTxs))
 	dbL1UserTxs, err := s.historyDB.GetAllL1UserTxs()
 	require.Nil(t, err)
-	// Ignore BatchNum in syncBlock.L1UserTxs because this value is set by the HistoryDB
+	// Ignore BatchNum in syncBlock.L1UserTxs because this value is set by
+	// the HistoryDB. Also ignore EffectiveAmount & EffectiveLoadAmount
+	// because this value is set by StateDB.ProcessTxs.
 	for i := range syncBlock.Rollup.L1UserTxs {
 		syncBlock.Rollup.L1UserTxs[i].BatchNum = block.Rollup.L1UserTxs[i].BatchNum
+		syncBlock.Rollup.L1UserTxs[i].EffectiveAmount = block.Rollup.L1UserTxs[i].EffectiveAmount
+		syncBlock.Rollup.L1UserTxs[i].EffectiveLoadAmount =
+			block.Rollup.L1UserTxs[i].EffectiveLoadAmount
 	}
 	assert.Equal(t, block.Rollup.L1UserTxs, syncBlock.Rollup.L1UserTxs)
 	for _, tx := range block.Rollup.L1UserTxs {
@@ -134,6 +139,7 @@ func checkSyncBlock(t *testing.T, s *Synchronizer, blockNum int, block, syncBloc
 		assert.Equal(t, batch.L2Txs, syncBatch.L2Txs)
 		// In exit tree, we only check AccountIdx and Balance, because
 		// it's what we have precomputed before.
+		require.Equal(t, len(batch.ExitTree), len(syncBatch.ExitTree))
 		for j := range batch.ExitTree {
 			exit := &batch.ExitTree[j]
 			assert.Equal(t, exit.AccountIdx, syncBatch.ExitTree[j].AccountIdx)
@@ -384,6 +390,7 @@ func TestSync(t *testing.T) {
 		> block // blockNum=2
 
 		CreateAccountDepositTransfer(1) E-A: 1000, 200 // Idx=256+7=263
+		ForceTransfer(1) C-B: 80
 		ForceExit(1) A: 100
 		ForceExit(1) B: 80
 		ForceTransfer(1) A-D: 100
@@ -415,7 +422,7 @@ func TestSync(t *testing.T) {
 	// blocks 1 (blockNum=3)
 	i = 1
 	require.Equal(t, 3, int(blocks[i].Block.Num))
-	require.Equal(t, 4, len(blocks[i].Rollup.L1UserTxs))
+	require.Equal(t, 5, len(blocks[i].Rollup.L1UserTxs))
 	require.Equal(t, 2, len(blocks[i].Rollup.Batches))
 	require.Equal(t, 3, len(blocks[i].Rollup.Batches[0].L2Txs))
 

test/til/sets.go

@@ -333,3 +333,23 @@ PoolTransferToEthAddr(1) A-B: 100 (126)
 //     D(0): 360
 //     F(0): 100
 `
+
+// SetPoolL2MinimumFlow1 contains the same transactions than the
+// SetPoolL2MinimumFlow0, but simulating coming from the smart contract
+// (always with the parameter ToIdx filled)
+var SetPoolL2MinimumFlow1 = `
+Type: PoolL2
+
+PoolTransfer(0) A-B: 100 (126)
+PoolTransfer(0) D-F: 100 (126)
+PoolExit(0) A: 100 (126)
+PoolTransfer(1) A-B: 100 (126)
+
+// Expected balances:
+//     Coord(0): 105, Coord(1): 40
+//     A(0): 510, A(1): 170
+//     B(0): 480, B(1): 190
+//     C(0): 845, C(1): 100
+//     D(0): 360
+//     F(0): 100
+`

test/til/txs.go

@@ -207,7 +207,7 @@ func (tc *Context) GenerateBlocks(set string) ([]common.BlockData, error) {
 				toIdxName:   inst.to,
 				L1Tx:        tx,
 			}
-			if err := tc.addToL1Queue(testTx); err != nil {
+			if err := tc.addToL1UserQueue(testTx); err != nil {
 				return nil, err
 			}
 		case common.TxTypeDeposit, common.TxTypeDepositTransfer: // tx source: L1UserTx
@@ -234,7 +234,7 @@ func (tc *Context) GenerateBlocks(set string) ([]common.BlockData, error) {
 				toIdxName:   inst.to,
 				L1Tx:        tx,
 			}
-			if err := tc.addToL1Queue(testTx); err != nil {
+			if err := tc.addToL1UserQueue(testTx); err != nil {
 				return nil, err
 			}
 		case common.TxTypeTransfer: // L2Tx
@@ -274,7 +274,7 @@ func (tc *Context) GenerateBlocks(set string) ([]common.BlockData, error) {
 				toIdxName:   inst.to,
 				L1Tx:        tx,
 			}
-			if err := tc.addToL1Queue(testTx); err != nil {
+			if err := tc.addToL1UserQueue(testTx); err != nil {
 				return nil, err
 			}
 		case common.TxTypeExit: // tx source: L2Tx
@@ -316,7 +316,7 @@ func (tc *Context) GenerateBlocks(set string) ([]common.BlockData, error) {
 				toIdxName:   inst.to,
 				L1Tx:        tx,
 			}
-			if err := tc.addToL1Queue(testTx); err != nil {
+			if err := tc.addToL1UserQueue(testTx); err != nil {
 				return nil, err
 			}
 		case typeNewBatch:
@@ -449,8 +449,8 @@ func (tc *Context) setIdxs() error {
 	return nil
 }
 
-// addToL1Queue adds the L1Tx into the queue that is open and has space
-func (tc *Context) addToL1Queue(tx L1Tx) error {
+// addToL1UserQueue adds the L1UserTx into the queue that is open and has space
+func (tc *Context) addToL1UserQueue(tx L1Tx) error {
 	if len(tc.Queues[tc.openToForge]) >= tc.rollupConstMaxL1UserTx {
 		// if current OpenToForge queue reached its Max, move into a
 		// new queue
@@ -698,6 +698,8 @@ func (tc *Context) FillBlocksL1UserTxsBatchNum(blocks []common.BlockData) {
 // - blocks[].Rollup.Batch.L1CoordinatorTxs[].BatchNum
 // - blocks[].Rollup.Batch.L1CoordinatorTxs[].EthBlockNum
 // - blocks[].Rollup.Batch.L1CoordinatorTxs[].Position
+// - blocks[].Rollup.Batch.L1CoordinatorTxs[].EffectiveAmount
+// - blocks[].Rollup.Batch.L1CoordinatorTxs[].EffectiveLoadAmount
 // - blocks[].Rollup.Batch.L2Txs[].TxID
 // - blocks[].Rollup.Batch.L2Txs[].Position
 // - blocks[].Rollup.Batch.L2Txs[].Nonce
@@ -779,6 +781,8 @@ func (tc *Context) FillBlocksExtra(blocks []common.BlockData, cfg *ConfigExtra)
 				tx := &batch.L1CoordinatorTxs[k]
 				tx.Position = position
 				position++
+				tx.EffectiveAmount = big.NewInt(0)
+				tx.EffectiveLoadAmount = big.NewInt(0)
 				nTx, err := common.NewL1Tx(tx)
 				if err != nil {
 					return err