- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- Upgrade go-merkletree version to include the last changes of Pebble
that fixes the cgo issues (which should fix#453), from:
c2b05f12d7
- TxSelector
- Remove parameter batchNum for GetL2TxSelection & GetL1L2TxSelection
- Add checks of ToBJJ & ToEthAddr when ToIdx>255
- Avoid getting the sender account twice to get the TokenID of a l2tx
- Add test to check that selected L2Txs are sorted by Nonce
- Discard L2Tx that return error at ProcessL2Txs
- executed `go mod tidy`
- StateDB
- Update GetIdxByEthAddrBJJ to return ErrToIdxNotFound when idx not found, so can be checked at upper levels
- TxSelector
- rm CoordIdxsDB that is no longer needed (also related methods)
- add `getCoordIdx` method to get the Coordinator Idx for a given TokenID
- Update coordinator account creation related to new TokenIDs from L2Txs
- Reorganize GetL1L2TxSelection
- return CoordIdxs used in the selection
- Update go-merkletree version which avoids marshaling Siblings to json
with 'null' value in case of empty array
Update usage of `*babyjub.PublicKey` to `babyjub.PublicKeyComp`
- when the key is not defined, internally is used `babyjub.EmptyBJJComp`, which is a `[32]byte` of zeroes of type `babyjub.PublicKeyComp`
- the API continues returning `nil` when the key is not defined
- Add SignatureConstant to L1Tx.TxCompressedData
- ZKInputs generation works initial version working and compatible with circom Hermez circuit
- Lots of small updates for circuits compatibility
- Update version (with new changes) of `go-iden3-crypto` & `go-merkletree`
- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
`delayed_withdrawn` were referencing batch_num. But these actions happen
outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
- In Synchronizer, first match a Rollup delayed withdrawn request, with the
WDelayer deposit (via TxHash), and store the owner and token associated
with the delayed withdrawn.
- In HistoryDB: store the owner and token of a delayed withdrawal request
in the exit_tree, and set delayed_withdrawn when the withdraw is done in
the WDelayer.
- Update dependency of sqlx to master
- Last release of sqlx is from 2018 October, and it doesn't support
`NamedQuery` with a slice of structs, which is used in this commit.
- Add ZKInputs parser to JSON
- Update ProcessTxs to last go-merkletree version changes
- Add StateDB test to generate ZKInputs to check inside a circom circuit
- Small fix at Til CoordinatorTx.LoadAmount=0
- Move smart contract constants and structs for variables to
common/{ethrollup.go, ethauction.go, ethwdelayer.go}:
- This removes repeated code of the structs for variables
- Allows reusing the constants and variables from all modules without
import cycles
- Remove unused common/scvars.go
- In common.BlockData, split data from each smart contract into a sepparate
field (Rollup, Auction, WDelayer). This affects the structures that til uses
as output, and HistoryDB in the AddBlockSCData.
- In Synchronizer:
- Pass starting block of each smart contract as config, instead of
incorrectly using the genesis block found in the acution constant (which
has a very different meaning)
- Use variable structs from common instead of an internal copy
- Synchronize more stuff (resolve some TODOs)
- Fix some issues found after initial testing with ganache
- In eth:
- In auction.go: Add method to get constants
- Update README to use ganache instead of buidlerevm as local blockchain
for testing
- Update env variables and test vectors to pass the tests with the
deployment in the ganache testnet.
- Use ethereum keys derived from paths (hdwallet) in testing to avoid
hardcoding private keys and generate the same keys from a mnemonic used
in the ganache tesnet.
In statedb:
- Store all values using prefixes for keys to allow iteration
- Add methods MTGetRoot, GetAccounts
Implement debugapi, an http server with debugging endpoints:
- debugAPI.GET("sdb/batchnum", a.handleCurrentBatch)
- debugAPI.GET("sdb/mtroot", a.handleMTRoot)
- debugAPI.GET("sdb/accounts", a.handleAccounts)
- debugAPI.GET("sdb/accounts/:Idx", a.handleAccount)
* Synchronizer
* mend
Synchronizer main loop & reorg
* mend
Synchronizer main loop & reorg
* mend
Synchronizer main loop & reorg
* Update PR and apply small changes
Update PR and apply small changes:
- Remove arbitrary line jumps (for example after an `err:=` there are cases with extra line before error check, and there are cases without the extra jumpline. Another example is the empty lines between a comment and the line of comment that is explained)
- Fix some typo
- Fix value printing of `lastSavedBlock` instead of `latestBlockNum`
- Uncomment parameters of structs and use linter syntax to avoid unused checks
* Update Synchr after master-pull to last types to compile
Co-authored-by: Toni Ramírez <toni@iden3.com>
Co-authored-by: arnaucube <root@arnaucube.com>
Eduard S
Arnau B
arnaucube
laisolizq
Toni Ramírez