- Add config parameter `Coordinator.L2DB.MinPriceUSD` which allows rejecting
  txs to the pool that have a fee lower than the minimum.
- In pool tx insertion, checking the number of pending txs atomically with the
  insertion to avoid data races leading to more than MaxTxs pending txs in the
  pool.

- cli / node
    - Update handler of SIGINT so that after 3 SIGINTs, the process terminates
      unconditionally
- coordinator
    - Store stats without pointer
    - In all functions that send a variable via channel, check for context done
      to avoid deadlock (due to no process reading from the channel, which has
      no queue) when the node is stopped.
    - Abstract `canForge` so that it can be used outside of the `Coordinator`
    - In `canForge` check the blockNumber in current and next slot.
    - Update tests due to smart contract changes in slot handling, and minimum
      bid defaults
    - TxManager
        - Add consts, vars and stats to allow evaluating `canForge`
        - Add `canForge` method (not used yet)
        - Store batch and nonces status (last success and last pending)
        - Track nonces internally instead of relying on the ethereum node (this
          is required to work with ganache when there are pending txs)
        - Handle the (common) case of the receipt not being found after the tx
          is sent.
        - Don't start the main loop until we get an initial messae fo the stats
          and vars (so that in the loop the stats and vars are set to
          synchronizer values)
        - When a tx fails, check and discard all the failed transactions before
          sending the message to stop the pipeline.  This will avoid sending
          consecutive messages of stop the pipeline when multiple txs are
          detected to be failed consecutively.  Also, future txs of the same
          pipeline after a discarded txs are discarded, and their nonces reused.
        - Robust handling of nonces:
            - If geth returns nonce is too low, increase it
            - If geth returns nonce too hight, decrease it
            - If geth returns underpriced, increase gas price
            - If geth returns replace underpriced, increase gas price
        - Add support for resending transactions after a timeout
        - Store `BatchInfos` in a queue
    - Pipeline
        - When an error is found, stop forging batches and send a message to the
          coordinator to stop the pipeline with information of the failed batch
          number so that in a restart, non-failed batches are not repated.
        - When doing a reset of the stateDB, if possible reset from the local
          checkpoint instead of resetting from the synchronizer.  This allows
          resetting from a batch that is valid but not yet sent / synced.
    - Every time a pipeline is started, assign it a number from a counter.  This
      allows the TxManager to ignore batches from stopped pipelines, via a
      message sent by the coordinator.
    - Avoid forging when we haven't reached the rollup genesis block number.
    - Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
      number of blocks of delay to wait before starting the pipeline when we
      reach a slot in which we can forge.
    - When detecting a reorg, only reset the pipeline if the batch from which
      the pipeline started changed and wasn't sent by us.
    - Add config parameter `ScheduleBatchBlocksAheadCheck`:
      ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
      forger address is checked to be allowed to forge (apart from checking the
      next block), used to decide when to stop scheduling new batches (by
      stopping the pipeline).  For example, if we are at block 10 and
      ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
      the pipeline will be stopped if we can't forge at block 15.  This value
      should be the expected number of blocks it takes between scheduling a
      batch and having it mined.
    - Add config parameter `SendBatchBlocksMarginCheck`:
      SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
      the coordinator is also checked to be allowed to forge, apart from the
      next block; used to decide when to stop sending batches to the smart
      contract.  For example, if we are at block 10 and
      SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
      batch will be discarded if we can't forge at block 15.
    - Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
      after which a non-mined ethereum transaction will be resent (reusing the
      nonce) with a newly calculated gas price
    - Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
      allowed for ethereum transactions
    - Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
      of pending transactions for new replacement transactions.  This is useful
      for testing with Ganache.
    - Extend BatchInfo with more useful information for debugging

- eth / ethereum client
    - Add necessary methods to create the auth object for transactions manually
      so that we can set the nonce, gas price, gas limit, etc manually
    - Update `RollupForgeBatch` to take an auth object as input (so that the
      coordinator can set parameters manually)
- synchronizer
    - In stats, add `NextSlot`
    - In stats, store full last batch instead of just last batch number
    - Instead of calculating a nextSlot from scratch every time, update the
      current struct (only updating the forger info if we are Synced)
    - Afer every processed batch, check that the calculated StateDB MTRoot
      matches the StateRoot found in the forgeBatch event.

L2Tx.TokenID is not on the data obtained by the Synchronizer from the
blockchain, but is set by the TxProcessor when processing the
transactions in the StateDB.

Also, make sure that all SQL queries that return slices are sorted

Previously the coordinator was erroneously using Slot.BatchesLen to determine
when anyone can forge.  The correct behaviour is implmenented with the boolean
flag `ForgerCommitment`, that is set to true only when there's a batch before
the deadline within a slot.

Delete Slot.BatchesLen, and the synchronization code of this value from the
Synchronizer, as this is not needed

Update usage of `*babyjub.PublicKey` to `babyjub.PublicKeyComp`
- when the key is not defined, internally is used `babyjub.EmptyBJJComp`, which is a `[32]byte` of zeroes of type `babyjub.PublicKeyComp`
- the API continues returning `nil` when the key is not defined

When the synchronizer queries the unforged L1UserTxs, sort them by position

Swap the order of calls setL1UserTxEffectiveAmounts and addBatch in
AddBlockSCData because otherwise, for reasons I dont understand, the item_id of
the txs doesn't follow the position of the txs.

- API
	- When updating network info, handle cases where no batches exists and
	  where no forgers exists
- cli/node
	- Update `cfg.buidler.toml` config file to a working version
- common
	- Add new smart contract structs and extend some existing ones to
	  reflect updates regarding events from the smart contracts
- SQL
	- Add new tables and extend existing ones to reflect updates regarding
	  events from the smart contracts
- db/historydb
	- Add functions to insert new smart contract events data
	- Fix unclosed rows that led to inconsistent sql driver state (replace
	  NamedQuery by NamedExec).  This fixes the error:
	  `pq: unexpected Parse response 'C'`
- db/l2db
	- Close rows after usage
- eth
	- In Rollup event, introduce a new UpdateBucketsParameter when there's a
	  SafeMode event, with `SafeMode = true`
- synchronizer
	- synchronize new events
	- avoid calling `auction.CanForge` before the genesisBlock to avoid
	  getting a revert.

- Add InvalidData flag to L1Tx
- Add BytesDataAvailability to L1Tx
- Update ZKInputs & HashGlobalInputs to last spec of the protocol
(massive migrations)
- TxProcessor check correctness of L1Txs

Compatible with hermeznetwork/commonjs v0.0.4
(c345239bba)

- Common:
	- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
	- Add UpdateNetworkInfoBlock to update just block information, to be
	  used when the node is not yet synchronized
- Node:
	- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
	  configurable time intervals
- Synchronizer:
	- When mapping events by TxHash, use an array to support the possibility
	  of multiple calls of the same function happening in the same
	  transaction (for example, a smart contract in a single transaction
	  could call withdraw with delay twice, which would generate 2 withdraw
	  events, and 2 deposit events).
	- In Stats, keep entire LastBlock instead of just the blockNum
	- In Stats, add lastL1BatchBlock
	- Test Stats and SCVars
- Coordinator:
	- Enable writing the BatchInfo in every step of the pipeline to disk
	  (with JSON text files) for debugging purposes.
	- Move the Pipeline functionality from the Coordinator to its own struct
	  (Pipeline)
	- Implement shouldL1lL2Batch
	- In TxManager, implement logic to perform several attempts when doing
	  ethereum node RPC calls before considering the error. (Both for calls
	  to forgeBatch and transaction receipt)
	- In TxManager, reorganize the flow and note the specific points in
	  which actions are made when err != nil
- HistoryDB:
	- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
	  forged l1Batch, to help the coordinator decide when to forge an
	  L1Batch.
- EthereumClient and test.Client:
	- Update EthBlockByNumber to return the last block when the passed
	  number is -1.

- API:
	- Modify the constructor so that hardcoded rollup constants don't need
	  to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
	- Update rollup constants with proper *big.Int when required
	- Add BidCoordinator and Slot structs used by the HistoryDB and
	  Synchronizer.
	- Add helper methods to AuctionConstants
	- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
	  table: `default_slot_set_bid_slot_num`), which indicates at which
	  slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
	- Move coordinator exclusive configuration from the node config to the
	  coordinator config
- Coordinator:
	- Reorganize the code towards having the goroutines started and stopped
	  from the coordinator itself instead of the node.
	- Remove all stop and stopped channels, and use context.Context and
	  sync.WaitGroup instead.
	- Remove BatchInfo setters and assing variables directly
	- In ServerProof and ServerProofPool use context instead stop channel.
	- Use message passing to notify the coordinator about sync updates and
	  reorgs
	- Introduce the Pipeline, which can be started and stopped by the
	  Coordinator
	- Introduce the TxManager, which manages ethereum transactions (the
	  TxManager is also in charge of making the forge call to the rollup
	  smart contract).  The TxManager keeps ethereum transactions and:
	  	1. Waits for the transaction to be accepted
		2. Waits for the transaction to be confirmed for N blocks
	- In forge logic, first prepare a batch and then wait for an available
	  server proof to have all work ready once the proof server is ready.
	- Remove the `isForgeSequence` method which was querying the smart
	  contract, and instead use notifications sent by the Synchronizer to
	  figure out if it's forging time.
	- Update test (which is a minimal test to manually see if the
	  coordinator starts)
- HistoryDB:
	- Add method to get the number of batches in a slot (used to detect when
	  a slot has passed the bid winner forging deadline)
	- Add method to get the best bid and associated coordinator of a slot
	  (used to detect the forgerAddress that can forge the slot)
- General:
	- Rename some instances of `currentBlock` to `lastBlock` to be more
	  clear.
- Node:
	- Connect the API to the node and call the methods to update cached
	  state when the sync advances blocks.
	- Call methods to update Coordinator state when the sync advances blocks
	  and finds reorgs.
- Synchronizer:
	- Add Auction field in the Stats, which contain the current slot with
	  info about highest bidder and other related info required to know who
	  can forge in the current block.
	- Better organization of cached state:
		- On Sync, update the internal cached state
		- On Init or Reorg, load the state from HistoryDB into the
		  internal cached state.

- In exit table, `instant_withdrawn`, `delayed_withdraw_request`, and
  `delayed_withdrawn` were referencing batch_num.  But these actions happen
  outside a batch, so they should reference a block_num.
- Process delayed withdrawns:
    - In Synchronizer, first match a Rollup delayed withdrawn request, with the
      WDelayer deposit (via TxHash), and store the owner and token associated
      with the delayed withdrawn.
    - In HistoryDB: store the owner and token of a delayed withdrawal request
      in the exit_tree, and set delayed_withdrawn when the withdraw is done in
      the WDelayer.
- Update dependency of sqlx to master
    - Last release of sqlx is from 2018 October, and it doesn't support
      `NamedQuery` with a slice of structs, which is used in this commit.

Previously, the synchronizer test was extending the output from til to
precalculate many fields to compare it with the synchronizer and BD output.
Since this is useful outside of the syncrhonizer testing: move this
functionality to til via a function that extends the output
(til.Context.FillBlocksExtra).

Also, add new functionality: calculate fee idxs dynamically by setting a user
name, and calculate collected fees.

- node:
    - Extend config to add initial variables of the smart contracts used as
      defaults before they are changed via events.
    - In stopped channels, set size 1 so that panics are not witheld until the
      node stops completely.
- common:
    - In Smart Contract variables, comment:
      - `WDelayerVariables.HermezRollupAddress` because it's not needed.
      - `RollupVariables.Buckets` because there are no events for it, and for
        now it's not used.
- historydb:
    - Add functions to get and set smart contract variables.
- db:
    - Add `Rollback` function in `utils.go` to reduce boilerplate in sql
      transaction rollbacks in defers in db functions.
    - Update `rollup_vars` and `auction_vars` (renamed from `consensus_vars`)
      table, and add `wdelayer_vars` table.
- synchronizer:
    - Synchronize WDelayer
    - Handle SC variables properly
- test/ethclient:
    - Add essential implementation of WDelayer