Updated:
batchbuilder
common
coordinator
db/statedb
eth
log
node
priceupdater
prover
synchronizer
test/*
txprocessor
txselector
Pending (once
https://github.com/hermeznetwork/hermez-node/tree/feature/serveapicli is
merged to master):
Update golangci-lint version to v1.37.1
api
apitypes
cli
config
db/historydb
db/l2db
Add the following config parameters at
`Coordinator.EthClient.ForgeBatchGasCost`:
- `Fixed`
- `L1UserTx`
- `L1CoordTx`
- `L2Tx`
Which are the costs associated to a ForgeBatch transaction, split
into different parts to be used in the formula to compute the gasLimit.
Also, replace usage of time.Duration by time.NewTimer, because the later allows
replacing timers by stopping them before so that we never leak resources.
- In tx_pool, add a column called `external_delete` that can be set to true
externally. Regularly, the coordinator will delete all pending txs with this
column set to true. The interval for this action is set via the new config
parameter `Coordinator.PurgeByExtDelInterval`.
- In tx_pool, add a column for the client ip that sent the transaction. The
api fills this value using the ClientIP method from gin.Context, which should
work even under a reverse-proxy.
coordinator:
- Add config `ForgeDelay`: ForgeDelay is the delay after which a batch is
forged if the slot is already commited. If set to 0s, the coordinator
will continously forge at the maximum rate.
- Add config `ForgeNoTxsDelay`: ForgeNoTxsDelay is the delay after which a
batch is forged even if there are no txs to forge if the slot is already
commited. If set to 0s, the coordinator will continously forge even if
the batches are empty.
- Add config `GasPriceIncPerc`: GasPriceIncPerc is the percentage increase
of gas price set in an ethereum transaction from the suggested gas price
by the ehtereum node
- Remove unused configuration parameters `CallGasLimit` and `GasPriceDiv`
- Forge always regardless of configured forge delay when the current slot is
not yet commited and we are the winner of the slot
synchronizer:
- Don't log with error (use warning) level when there's a reorg and the
queried events by block using the block hash returns "unknown block".
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- When a tx fails, check and discard all the failed transactions before
sending the message to stop the pipeline. This will avoid sending
consecutive messages of stop the pipeline when multiple txs are
detected to be failed consecutively. Also, future txs of the same
pipeline after a discarded txs are discarded, and their nonces reused.
- Robust handling of nonces:
- If geth returns nonce is too low, increase it
- If geth returns nonce too hight, decrease it
- If geth returns underpriced, increase gas price
- If geth returns replace underpriced, increase gas price
- Add support for resending transactions after a timeout
- Store `BatchInfos` in a queue
- Pipeline
- When an error is found, stop forging batches and send a message to the
coordinator to stop the pipeline with information of the failed batch
number so that in a restart, non-failed batches are not repated.
- When doing a reset of the stateDB, if possible reset from the local
checkpoint instead of resetting from the synchronizer. This allows
resetting from a batch that is valid but not yet sent / synced.
- Every time a pipeline is started, assign it a number from a counter. This
allows the TxManager to ignore batches from stopped pipelines, via a
message sent by the coordinator.
- Avoid forging when we haven't reached the rollup genesis block number.
- Add config parameter `StartSlotBlocksDelay`: StartSlotBlocksDelay is the
number of blocks of delay to wait before starting the pipeline when we
reach a slot in which we can forge.
- When detecting a reorg, only reset the pipeline if the batch from which
the pipeline started changed and wasn't sent by us.
- Add config parameter `ScheduleBatchBlocksAheadCheck`:
ScheduleBatchBlocksAheadCheck is the number of blocks ahead in which the
forger address is checked to be allowed to forge (apart from checking the
next block), used to decide when to stop scheduling new batches (by
stopping the pipeline). For example, if we are at block 10 and
ScheduleBatchBlocksAheadCheck is 5, eventhough at block 11 we canForge,
the pipeline will be stopped if we can't forge at block 15. This value
should be the expected number of blocks it takes between scheduling a
batch and having it mined.
- Add config parameter `SendBatchBlocksMarginCheck`:
SendBatchBlocksMarginCheck is the number of margin blocks ahead in which
the coordinator is also checked to be allowed to forge, apart from the
next block; used to decide when to stop sending batches to the smart
contract. For example, if we are at block 10 and
SendBatchBlocksMarginCheck is 5, eventhough at block 11 we canForge, the
batch will be discarded if we can't forge at block 15.
- Add config parameter `TxResendTimeout`: TxResendTimeout is the timeout
after which a non-mined ethereum transaction will be resent (reusing the
nonce) with a newly calculated gas price
- Add config parameter `MaxGasPrice`: MaxGasPrice is the maximum gas price
allowed for ethereum transactions
- Add config parameter `NoReuseNonce`: NoReuseNonce disables reusing nonces
of pending transactions for new replacement transactions. This is useful
for testing with Ganache.
- Extend BatchInfo with more useful information for debugging
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
- In stats, store full last batch instead of just last batch number
- Instead of calculating a nextSlot from scratch every time, update the
current struct (only updating the forger info if we are Synced)
- Afer every processed batch, check that the calculated StateDB MTRoot
matches the StateRoot found in the forgeBatch event.
- Close StateDB when stopping the node
- Lock the StateDB when doing checkpoints to avoid multiple instances of
oppening the pebble DB at the same time.
- cli / node
- Update handler of SIGINT so that after 3 SIGINTs, the process terminates
unconditionally
- coordinator
- Store stats without pointer
- In all functions that send a variable via channel, check for context done
to avoid deadlock (due to no process reading from the channel, which has
no queue) when the node is stopped.
- Abstract `canForge` so that it can be used outside of the `Coordinator`
- In `canForge` check the blockNumber in current and next slot.
- Update tests due to smart contract changes in slot handling, and minimum
bid defaults
- TxManager
- Add consts, vars and stats to allow evaluating `canForge`
- Add `canForge` method (not used yet)
- Store batch and nonces status (last success and last pending)
- Track nonces internally instead of relying on the ethereum node (this
is required to work with ganache when there are pending txs)
- Handle the (common) case of the receipt not being found after the tx
is sent.
- Don't start the main loop until we get an initial messae fo the stats
and vars (so that in the loop the stats and vars are set to
synchronizer values)
- eth / ethereum client
- Add necessary methods to create the auth object for transactions manually
so that we can set the nonce, gas price, gas limit, etc manually
- Update `RollupForgeBatch` to take an auth object as input (so that the
coordinator can set parameters manually)
- synchronizer
- In stats, add `NextSlot`
When scheduling an L1Batch, make sure the previous L1Batch has been
synchronized. Otherwise, an L1Batch will be forged that may not contain all
the L1UserTxs that are supposed to be included.
- Debug Batch File
- Add details about why a batch is scheduled to be L1Batch or regular
- Add timestamps in time and blockNumber of important events
- Use a different naming for the files (batchNum + timestamp)
- Coordinator:
- To make decisions and store debug info, always use the current block that
is being mined, instead of the last mined block
- Node
- Load Coordinator Fee Account from config
- Sign the AccountCreationMsg to generate the
AccountCreationAuth
- Resolve#465
- Wait for synchronizer termination before stopping coordinator to avoid
getting stuck when closing in the following case:
- The coordinator stops reading the synchronizer msg channel,
and the node gets stuck sending a message to that channel.
- Common
- Move account creation auth signature code to common.
- Update RollupConstInputSHAConstantBytes
- Coordinator
- Set batch status in the debug file
- Propagate SCVariables on reorg
- Pipeline: Get SCVariables updates
- Resolve#457
- Fix off by 1 error in Pipeline.shouldL1L2Batch() (which shouldn't have
caused any problem, but it was not right)
- KVDB
- Delete future checkpoints after reset
- In `ResetFromSynchronizer`, remove all checkpoints first, and follow
the same logic as `reset()`.
- Cli
- Add command to generate a BabyJubJub key pair (to be used for the
Coordinator Fee Account)
- Node
- Adjust example config `Coordinator.L1BatchTimeoutPerc` to avoid
missing the L1Batch deadline with the following setup:
- a block is mined every 2 seconds
- single proof server that takes 2 seconds to calculate a proof
- TxProcessor
- Close temporary pebble used for the exit tree after usage.
- Resolve#463
- Upgrade go-merkletree version to include the last changes of Pebble
that fixes the cgo issues (which should fix#453), from:
c2b05f12d7
- TxSelector
- Remove parameter batchNum for GetL2TxSelection & GetL1L2TxSelection
- Add checks of ToBJJ & ToEthAddr when ToIdx>255
- Avoid getting the sender account twice to get the TokenID of a l2tx
- Add test to check that selected L2Txs are sorted by Nonce
- Discard L2Tx that return error at ProcessL2Txs
- executed `go mod tidy`
- Til
- tests that were using `til.SetBlockchainMinimumFlow0` have been
updated, as now the L1CoordinatorTxs are placed simulating TxSelector
creation (when needed, not before)
- Add `EthSk` to `tc.User` to allow to sign `AccoutCreationAuths` at
the tests flows
- TxProcessor
- for L2Txs get TokenID from tx.FromIdx Account.TokenID instead than
- update tests vectors for new values
from tx.TokenID (which not always is set)
- Common
- move TxIDsFromL2Txs & TxIDsFromPoolL2Txs from `coordinator` to
`common` to allow usage from other packages
- Remove MaxL1CoordTxs parameter from the TxSelector because this parameter
doesn't exist
- Use ChainID in l1tx byte encoding
- Pass txprocessor configuration to batch builder via an existing parameter
Load an ethereum keystore when the node is started in coordinator mode. The
private key corresponding to the forger address must be imported into the
keystore before running the node in coordinator mode. You can see an examples
in `cli/node/load-sk-example.sh`.
Previously the coordinator was erroneously using Slot.BatchesLen to determine
when anyone can forge. The correct behaviour is implmenented with the boolean
flag `ForgerCommitment`, that is set to true only when there's a batch before
the deadline within a slot.
Delete Slot.BatchesLen, and the synchronization code of this value from the
Synchronizer, as this is not needed
- Implement Pipeline.prepareForgeBatchArgs()
- Add a minimal stress test for the coordinator (that also runs the
synchronizer)
- Update txprocessor.ProcessTxs() to return valid results for batches without
transactions
- Add the boilerplate for the corresponding test, leaving as TODO the
zkInput values
- Update prover client to use the same point format as proof server (projective)
- Update interface of TxSelector.GetCoordIdxs to also return the authorizations
to create accounts that go with the l1CoordinatorTxs.
TxTypeToEthAddr & TxTypeToBJJ
- TxSelector
- Add SelectionConfig for each batch
- Add CoordIdxDB key-value where the CoordinatorIdxs are stored
- Separated method for filtering TxTypeToEthAddr & TxTypeToBJJ
- API:
- Replace `emergencyModeStaringTime` by `emercengyModeStartingBlock`
- Synchronizer:
- Track emergency mode starting block
- cli/node
- Add working coordinator config
- coordinator:
- Retry handler for synchronizer stats in case of error (instead of
waiting for the next block to try again)
- On init, trigger an initial call to the handler for synced block
before waiting for the synchronizer, to force the coordinator to start
its logic even if there's no new block right after the node has been
started (very useful for running in testnet where the frequency of
blocks is variable)
- Merge Msg for synced block and updated vars into one: `MsgSyncBlock`.
- API
- When updating network info, handle cases where no batches exists and
where no forgers exists
- cli/node
- Update `cfg.buidler.toml` config file to a working version
- common
- Add new smart contract structs and extend some existing ones to
reflect updates regarding events from the smart contracts
- SQL
- Add new tables and extend existing ones to reflect updates regarding
events from the smart contracts
- db/historydb
- Add functions to insert new smart contract events data
- Fix unclosed rows that led to inconsistent sql driver state (replace
NamedQuery by NamedExec). This fixes the error:
`pq: unexpected Parse response 'C'`
- db/l2db
- Close rows after usage
- eth
- In Rollup event, introduce a new UpdateBucketsParameter when there's a
SafeMode event, with `SafeMode = true`
- synchronizer
- synchronize new events
- avoid calling `auction.CanForge` before the genesisBlock to avoid
getting a revert.
- Common
- Add `IdxNonce` type used to track nonces in accounts to invalidate
l2txs in the pool
- Config
- Update coordinator config will all the new configuration parameters
used in the coordinator
- Coordinator
- Introduce the `Purger` to track how often to purge and do the job when
needed according to a configuration.
- Implement the methods to invalidate l2txs transactions due to l2txs
selection in batches. For now these functions are not used in favour
of the `Purger` methods, which check ALL the l2txs in the pool.
- Call Invalidation and Purging methods of the purger both when the
node is forging (in the pipeline when starting a new batch) and when
the node is not forging (in coordinator when being notified about a
new synced block)
- L2DB:
- Implement `GetPendingUniqueFromIdxs` to get all the unique idxs from
pending transactions (used to get their nonces and then invalidate
txs)
- Redo `CheckNonces` with a single SQL query and using `common.IdxNonce`
instead of `common.Account`
- StateDB:
- Expose GetIdx to check errors when invalidating pool txs
- Synchronizer:
- Test forged L1UserTxs processed by TxProcessor
- Improve checks of Effective values
- TxSelector:
- Expose the internal LocalStateDB in order to check account nonces in
the coordinator when not forging.
- Common
- Move ErrTODO and ErrDone to common for usage where needed.
- Coordinator
- Move prover types to prover package
- Handle reorgs, stopping the pipeline when necessary
- Handle ethereum transaction errors by stopping the pipeline
- In case of ethereum transaction revert, check for known revert causes
(more revert causes can be added to handle more cases)
- Fix skipped transactions in TxManager confirmation logic
- Cancel and wait for provers to be ready
- Connect L2DB to:
- purge l2txs due to timeout
- mark l2txs at the different states
- Connect HistoryDB to query L1UserTxs to forge in an L1Batch
- L2DB
- Skip update functions when the input slices have no values (to avoid a
query with no values that results in an SQL error)
- StateDB
- In LocalStateDB, fix Reset when mt == nil
- Prover (new package)
- Rename the interface to Prover
- Rename the mock struct to Mock
- Extend Prover interface methods to provide everything required by the
coordinator
- Begin implementing required http client code to interact with server
proof (not tested)
- Synchronizer:
- Add LastForgeL1TxsNum to Stats
- Test/Client
- Update Auction logic to track slots in which there's no forge during
the time before the deadline (following the solidity implementation)
- Common:
- Rename Block.EthBlockNum to Block.Num to avoid unneeded repetition
- API:
- Add UpdateNetworkInfoBlock to update just block information, to be
used when the node is not yet synchronized
- Node:
- Call API.UpdateMetrics and UpdateRecommendedFee in a loop, with
configurable time intervals
- Synchronizer:
- When mapping events by TxHash, use an array to support the possibility
of multiple calls of the same function happening in the same
transaction (for example, a smart contract in a single transaction
could call withdraw with delay twice, which would generate 2 withdraw
events, and 2 deposit events).
- In Stats, keep entire LastBlock instead of just the blockNum
- In Stats, add lastL1BatchBlock
- Test Stats and SCVars
- Coordinator:
- Enable writing the BatchInfo in every step of the pipeline to disk
(with JSON text files) for debugging purposes.
- Move the Pipeline functionality from the Coordinator to its own struct
(Pipeline)
- Implement shouldL1lL2Batch
- In TxManager, implement logic to perform several attempts when doing
ethereum node RPC calls before considering the error. (Both for calls
to forgeBatch and transaction receipt)
- In TxManager, reorganize the flow and note the specific points in
which actions are made when err != nil
- HistoryDB:
- Implement GetLastL1BatchBlockNum: returns the blockNum of the latest
forged l1Batch, to help the coordinator decide when to forge an
L1Batch.
- EthereumClient and test.Client:
- Update EthBlockByNumber to return the last block when the passed
number is -1.
- API:
- Modify the constructor so that hardcoded rollup constants don't need
to be passed (introduce a `Config` and use `configAPI` internally)
- Common:
- Update rollup constants with proper *big.Int when required
- Add BidCoordinator and Slot structs used by the HistoryDB and
Synchronizer.
- Add helper methods to AuctionConstants
- AuctionVariables: Add column `DefaultSlotSetBidSlotNum` (in the SQL
table: `default_slot_set_bid_slot_num`), which indicates at which
slotNum does the `DefaultSlotSetBid` specified starts applying.
- Config:
- Move coordinator exclusive configuration from the node config to the
coordinator config
- Coordinator:
- Reorganize the code towards having the goroutines started and stopped
from the coordinator itself instead of the node.
- Remove all stop and stopped channels, and use context.Context and
sync.WaitGroup instead.
- Remove BatchInfo setters and assing variables directly
- In ServerProof and ServerProofPool use context instead stop channel.
- Use message passing to notify the coordinator about sync updates and
reorgs
- Introduce the Pipeline, which can be started and stopped by the
Coordinator
- Introduce the TxManager, which manages ethereum transactions (the
TxManager is also in charge of making the forge call to the rollup
smart contract). The TxManager keeps ethereum transactions and:
1. Waits for the transaction to be accepted
2. Waits for the transaction to be confirmed for N blocks
- In forge logic, first prepare a batch and then wait for an available
server proof to have all work ready once the proof server is ready.
- Remove the `isForgeSequence` method which was querying the smart
contract, and instead use notifications sent by the Synchronizer to
figure out if it's forging time.
- Update test (which is a minimal test to manually see if the
coordinator starts)
- HistoryDB:
- Add method to get the number of batches in a slot (used to detect when
a slot has passed the bid winner forging deadline)
- Add method to get the best bid and associated coordinator of a slot
(used to detect the forgerAddress that can forge the slot)
- General:
- Rename some instances of `currentBlock` to `lastBlock` to be more
clear.
- Node:
- Connect the API to the node and call the methods to update cached
state when the sync advances blocks.
- Call methods to update Coordinator state when the sync advances blocks
and finds reorgs.
- Synchronizer:
- Add Auction field in the Stats, which contain the current slot with
info about highest bidder and other related info required to know who
can forge in the current block.
- Better organization of cached state:
- On Sync, update the internal cached state
- On Init or Reorg, load the state from HistoryDB into the
internal cached state.
- Implement new TxID spec that distinguishes L1UserTx and L1CoordinatorTx
- Replace some type []*Foo by []Foo
- Fix HistoryDB & L2DB bug: in case of error, a rollback was applied and the returned error was nil
- Reorder inserts in historydb.NewHistoryDB() to follow foreign key dependencies
- Add initial synchronizer test with test.Client (for now, only tested l1UserTxs, blocks, addToken)
- Update L1UserTx event in test.Client
- gofmt - Gofmt checks whether code was gofmt-ed. By default this tool runs
with -s option to check for code simplification
- goimports - Goimports does everything that gofmt does. Additionally it checks
unused imports
- golint - Golint differs from gofmt. Gofmt reformats Go source code, whereas
golint prints out style mistakes
- checks the uncommented exported functions & types
Update the code to fix the lint checks.
Add linter checks to GHA & Fix code to pass lints.
The linters added are:
- whitespace: Tool for detection of leading and trailing whitespace
- gosec: Inspects source code for security problems
- gci: Gci control golang package import order and make it always deterministic
- misspell: Finds commonly misspelled English words in comments
- gomnd: An analyzer to detect magic numbers
The file utils/utils.go is excluded from the checks of gomnd, as uses magic numbers through the code
Danilo Pantani
arnaucube
Eduard S
Arnau B