There are 2 ways to interpret an Exit transaction with Amount=0:
`A`. Not adding a new Leaf to the ExitTree, so not modifying the Exit
MerkleRoot
`B`. Adding a new Leaf to the ExitTree, with Balance=0, which modifies
the Exit MerkleRoot
Currently the [Circuits](https://github.com/hermeznetwork/circuits) are
doing approach `A`, and the
[hermez-node](https://github.com/hermeznetwork/hermez-node) is doing the
approach `B`. The idea of this commit, is to use approach `A` also in
the hermez-node.
- Add AmountF new parameter to ZKInputs
- Update ZKInputs test vectors with float40 checked with circom circuits
- Small fix at eth/rollup.go with lenL1L2TxsBytes with new length of
Float40
- KVDB/StateDB
- Pass config parameters in a Config type instead of using many
arguments in constructor.
- Add new parameter `NoLast` which disables having an opened DB with a
checkpoint to the last batchNum for thread-safe reads. Last will be
disabled in the StateDB used by the TxSelector and BatchBuilder.
- Add new parameter `NoGapsCheck` which skips checking gaps in the list
of checkpoints and returning errors if there are gaps. Gaps check
will be disabled in the StateDB used by the TxSelector and
BatchBuilder, because we expect to have gaps when there are multiple
coordinators forging (slots not forged by our coordinator will leave
gaps).
Fixes the case where there is a PoolTxs of type Exit with fee 0 for a
TokenID. Before this commit the Coordinator was not sending the
accumulated fee (which has value 0) to the Coordinator account for that
TokenID, with this commit the Coordinator always sends the accumulated
fee even when the value is 0 to match the hermez circom circuits
behaviour.
Also added a test to check the values and that also sends the proof to a
real proof server to check that can generate a valid proof.
PoolL2Tx.Info contains information about the status & State of the
transaction. As for example, if the Tx has not been selected in the last
batch due not enough Balance at the Sender account, this reason would
appear at this parameter.
This will help the client (wallet, batchexplorer, etc) to reason why a
L2Tx is not selected in the forged batches.
- TxSelector
- Add check enough funds on sender at TxSelector and don't
include the tx in the selection
- TxProcessor
- Add checks that the balance when substracted the
amount/amount+fee never goes below 0
fix#502
Remove increment in exit tree leaf nonce when there are multiple exits for the
same account in the same batch.
Add a test to verify the correct implementation of exit leafs caused by
multiple exits.
- TxProcessor move txCompressedDataEmpty inside the if of tp.zki!=nil
- Abstract generation of transactions for ZKInput tests to avoid code
repetition
- used at txprocessor & test/zkproof tests
- Til
- update Til users BJJ key generation for better js tests
compatibility
- Common
- PoolL2Tx to L2Tx use AuxToIdx in case that ToIdx is 0
- Update ZKInputs parameter descriptions
- TxProcessor
- Fix AccumulatedFees in case that there is no CoordIdx for that token
- Fix zki.NewExit usage
- Use same order for AccumulatedFees & FeeIdx & FeePlanTokens
- Add Nonce usage to ExitLeafs
- Update TestZKInput6 and check its compatibility with circom Hermez
circuits
- Node
- Load Coordinator Fee Account from config
- Sign the AccountCreationMsg to generate the
AccountCreationAuth
- Resolve#465
- Wait for synchronizer termination before stopping coordinator to avoid
getting stuck when closing in the following case:
- The coordinator stops reading the synchronizer msg channel,
and the node gets stuck sending a message to that channel.
- Common
- Move account creation auth signature code to common.
- Update RollupConstInputSHAConstantBytes
- Coordinator
- Set batch status in the debug file
- Propagate SCVariables on reorg
- Pipeline: Get SCVariables updates
- Resolve#457
- Fix off by 1 error in Pipeline.shouldL1L2Batch() (which shouldn't have
caused any problem, but it was not right)
- KVDB
- Delete future checkpoints after reset
- In `ResetFromSynchronizer`, remove all checkpoints first, and follow
the same logic as `reset()`.
- Cli
- Add command to generate a BabyJubJub key pair (to be used for the
Coordinator Fee Account)
- Node
- Adjust example config `Coordinator.L1BatchTimeoutPerc` to avoid
missing the L1Batch deadline with the following setup:
- a block is mined every 2 seconds
- single proof server that takes 2 seconds to calculate a proof
- TxProcessor
- Close temporary pebble used for the exit tree after usage.
- Resolve#463
- Til
- tests that were using `til.SetBlockchainMinimumFlow0` have been
updated, as now the L1CoordinatorTxs are placed simulating TxSelector
creation (when needed, not before)
- Add `EthSk` to `tc.User` to allow to sign `AccoutCreationAuths` at
the tests flows
- TxProcessor
- for L2Txs get TokenID from tx.FromIdx Account.TokenID instead than
- update tests vectors for new values
from tx.TokenID (which not always is set)
- Common
- move TxIDsFromL2Txs & TxIDsFromPoolL2Txs from `coordinator` to
`common` to allow usage from other packages
- StateDB
- Update GetIdxByEthAddrBJJ to return ErrToIdxNotFound when idx not found, so can be checked at upper levels
- TxSelector
- rm CoordIdxsDB that is no longer needed (also related methods)
- add `getCoordIdx` method to get the Coordinator Idx for a given TokenID
- Update coordinator account creation related to new TokenIDs from L2Txs
- Reorganize GetL1L2TxSelection
- return CoordIdxs used in the selection
- Update go-merkletree version which avoids marshaling Siblings to json
with 'null' value in case of empty array
- Remove MaxL1CoordTxs parameter from the TxSelector because this parameter
doesn't exist
- Use ChainID in l1tx byte encoding
- Pass txprocessor configuration to batch builder via an existing parameter
On the Circuits uses the name `nTx` (and on the tests `maxTx`), but
Contracts `maxTx`. On Go we had both variables, but really only used
one, now at Go we use `MaxTx` to refer to the maximum number of
transactions.
- Implement Pipeline.prepareForgeBatchArgs()
- Add a minimal stress test for the coordinator (that also runs the
synchronizer)
- Update txprocessor.ProcessTxs() to return valid results for batches without
transactions
- Add the boilerplate for the corresponding test, leaving as TODO the
zkInput values
- Update prover client to use the same point format as proof server (projective)
- Update interface of TxSelector.GetCoordIdxs to also return the authorizations
to create accounts that go with the l1CoordinatorTxs.
Update usage of `*babyjub.PublicKey` to `babyjub.PublicKeyComp`
- when the key is not defined, internally is used `babyjub.EmptyBJJComp`, which is a `[32]byte` of zeroes of type `babyjub.PublicKeyComp`
- the API continues returning `nil` when the key is not defined
- Update IntermediateState FinalAccFee values to fit in the Circom circuit expected inputs
- Add ZKInputs generation test with transactions generated by Til
(TestZKInputs6)
- BatchBuilder: remove redundant MakeCheckpoint call
- Update tx processor of Exit & ForceExit types
- Update ZKInputs generation related to Exit transactions
- Add TestZKInputs5 which adds tests generation of ZKInputs compatible
with Circom circuits including Exit (L2) & ForceExit (L1) transaction types
- Add StateDB test to check max DepositAmount case
- StateDB fix process txs of type CreateAccountDepositTransfer & DepositTransfer
- Add TestZKInputs3 & TestZKInputs4 which:
- have a compatible check in js version to check Circom circuits
compatibility
- adds test of tx type of CreateAccountDepositTransfer &
DepositTransfer
- Common
- Add `IdxNonce` type used to track nonces in accounts to invalidate
l2txs in the pool
- Config
- Update coordinator config will all the new configuration parameters
used in the coordinator
- Coordinator
- Introduce the `Purger` to track how often to purge and do the job when
needed according to a configuration.
- Implement the methods to invalidate l2txs transactions due to l2txs
selection in batches. For now these functions are not used in favour
of the `Purger` methods, which check ALL the l2txs in the pool.
- Call Invalidation and Purging methods of the purger both when the
node is forging (in the pipeline when starting a new batch) and when
the node is not forging (in coordinator when being notified about a
new synced block)
- L2DB:
- Implement `GetPendingUniqueFromIdxs` to get all the unique idxs from
pending transactions (used to get their nonces and then invalidate
txs)
- Redo `CheckNonces` with a single SQL query and using `common.IdxNonce`
instead of `common.Account`
- StateDB:
- Expose GetIdx to check errors when invalidating pool txs
- Synchronizer:
- Test forged L1UserTxs processed by TxProcessor
- Improve checks of Effective values
- TxSelector:
- Expose the internal LocalStateDB in order to check account nonces in
the coordinator when not forging.
- Separate ZKInputs tests at StateDB package
- Small fix at ZKInputs generation FeeIdxs length
- Fees related parameters at ZKInputs works properly
- Add ZKInputs generation test with fees (`TestZKInputs1`), which output
has been tested with circom to ensure compatibility
- Add SignatureConstant to L1Tx.TxCompressedData
- ZKInputs generation works initial version working and compatible with circom Hermez circuit
- Lots of small updates for circuits compatibility
- Update version (with new changes) of `go-iden3-crypto` & `go-merkletree`
- Add InvalidData flag to L1Tx
- Add BytesDataAvailability to L1Tx
- Update ZKInputs & HashGlobalInputs to last spec of the protocol
(massive migrations)
- TxProcessor check correctness of L1Txs
Compatible with hermeznetwork/commonjs v0.0.4
(c345239bba)
Add HashGlobalInputs for ZKInputs compatible with js & circom circuits version.
Compatible with hermeznetwork/commonjs at version: c6a1448db5
(c6a1448db5)
- Allow starting the DebugAPI from the node via config
- In StateDB:
- Make checkpoints when ProcessTxs() succeeds
- Remove extra hardcoded `statedb` path that was redundant
- Replace hardcoded `[:4]` by `[:]` when parsing idx, which failed because
idx is 6 bytes length now.
- Extra: In node, use waitgroup instead of `stoppedXXX` channels to wait for
syncrhonizer goroutines to finish.
- Add ZKInputs parser to JSON
- Update ProcessTxs to last go-merkletree version changes
- Add StateDB test to generate ZKInputs to check inside a circom circuit
- Small fix at Til CoordinatorTx.LoadAmount=0
Eduard S
Arnau B